Laney LX 10 Bedienungsanleitung

GUITAR AMPLIFIER

WELCOME

INTRODUCTION

The ultra compact LX10, brings the renowned big tones of the LX range to a compact portable guitar

amp.

The 10-Watt LX10 is capable of producing some great tones. Housing a big sounding 5” driver and 2

band EQ the LX10 produces a nice open clean sound and hitting the on board DRIVE switch allows

you to kick in some serious, great sounding distortion.

Plugging in some headphones means you can play

whenever you like, whatever time of the day or night and

if you connect an external device to the AUX IN socket

you can jam along with your favourite players!

Finished in the same décor as the bigger LX models the

LX10 is a great addition to the LX range.

All the features & controls are covered over the next few

pages, please take the time to read this manual fully as it

will allow you to get the very best from your amplifier,

read on, play and enjoy…

4 6

VOLUME BASS

DRIVEINPUT

TREBLE

AUX IN POWER

EQUALISATION

GUITAR AMPLIFIER

1 1

Input: This socket should be used for connecting your instrument to the amplifier. Only use a good

quality screened cable.

Volume: Sets the overall listening level of the amplifier.

Drive: Switch in to activate drive channel, adjust the volume to suit, and get some serious distortion!

EQ Controls: Traditional Bass & Treble passive tone controls. Passive controls have the advantage of

always sounding musical at any of their settings, due to their unique interactive nature.This gives the player

a more natural set of tools to shape their ideal sound. Set these midway at (0) as a good starting point.

Aux In: A 3.5mm Stereo line input for connection of a CD or MP3 player as a backing track. Control the

level of the input using the volume control on your CD/MP3 player.

Phones: 3.5mm stereo jack socket for connecting headphones and when connected, the internal

loudspeaker is automatically switched off.

Power LED: This will illuminate when the power switch is operated, indicating the presence of mains

power within the amplifier.

Power Switch: Mains power switch for the unit.

FRONT PANEL CONTROLS

(ALWAYS SWITCH OFF AND DISCONNECT THE POWER CORD WHEN NOT IN USE)

SERIAL NUMBER:

DESIGNED IN THE UK BY LANEY

LX10

MAXIMUM POWER CONSUMPTION

15 WATTS 50/60Hz

www.laney.co.uk

MODEL:

SUPPLY VOLTAGE:

~220V/~230V/~240V

~120V

~100V N15039

CAUTION - RISK OF ELECTRIC SHOCK DO NOT OPEN

ATTENTION - RISQUE DE DÉCHARGE ÉLECTRIQUE, NE S'OUVRE PAS

CAUTION: TO REDUCE THE RISK OF FIRE REPLACE FUSE WITH SAME TYPE AND RATING.

ATTENTION: POUR RÉDUIRE LE RISQUE DU FEU REMPLACEZ AVEC LE MÊMES TYPE ET ESTIMATION.

WARNING: THIS APPARATUS MUST BE EARTHED.

AVERTISSEMENT: CET APPAREIL DOIT ÊTRE MIS À LA TERRE

LAITE ON LIITETTÄVÄSUOJAMAADOITUSKOSKETTIMILLA VARUSTETTUUN PISTORASIAAN

APPARATET MÅ TILKOPLES JORDET STIKKONTAKT

APPARATEN SKALL ANSLUTAS TILL JORDAT UTTAG

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO

NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

AVERTISSEMENT: POUR RÉDUIRE LE RISQUE DU FEU OU DE DÉCHARGE ÉLECTRIQUE N'EXPOSEZ PAS CET APPAREIL À LA PLUIE

OU A L’HUMIDITÉ . NE PAS ENLEVER LA COUVERTURE. EN CAS DE PROBLEME RÉFÉREZ A UN PROFFESSIONEL.

MADE IN CHINA. FABRIQUE EN CHINE.

L Z B 1 2 3 4

REAR PANEL

Information area relating to the

amplifier: Supply Voltage, Model,

Serial Number, etc.

A built in mains lead is provided

to connect to your power

source. Make sure the specified

voltage is correct for your

country!

CD/MP3

Headphones

Guitar

Options

General Notes

Amplifier connection: In order to avoid damage, it is advisable to establish and follow a pattern

for turning on and off your equipment. With all system parts connected, turn on source equipment,

MP3/CD players, etc. BEFORE turning on your guitar amplifier. Similarly when turning off your

system always turn down the Volume controls on your guitar amplifier and then turn off its power

before turning off other equipment.

Cables:

Servicing: The user should not attempt to service these products. Refer all servicing to qualified

service personnel.

Only use a good quality screened cable to connect your instrument to the amplifier.

CONNECTIONS

Supply Voltage (Factory Preset) ~100V, ~120V, (~220V, > ~240V) 50/60Hz

Power Consumption 15W

Output Power Rating 10W

Loudspeaker 5” Custom Designed Driver

Features Input Skt (6.3 Jack)

Drive Switch

Bass

Treble

Aux In (3.5 Stereo Jack)

Headphone Skt (3.5 Stereo Jack)

Master Volume

Size 245*216*146 (H*W*D)

Unit Weight 2.6Kg

Packing Weight 3.2Kg

SPECIFICATIONS

BLOCK DIAGRAM

This product conforms to the requirements of the

following European Regulations, Directives & Rules:

CE Mark (93/68/EEC),

Low Voltage (72/23/EEC),

EMC (2004/108/EEC),

RoHS (2011/65/EU),

WEEE (EU2002/96/EC).

In order to reduce environmental damage, at the

end of its useful life, this product must not be

disposed off along with normal household waste to

landfill sites. It must be taken to an

approved recycling centre according

to the recommendations of the

WEEE (Waste Electrical And

Electronic Equipment) Directive

applicable in your country.

HEADPHONES

INTERNAL

LOUDSPEAKER

DISTORTION EQ

SECTION

GUITAR INPUT

AUX IN

ON/OFF

BASS

TREBLE

MASTER VOLUME

In the interest of continued development, Laney

reserves the right to amend product specification

without prior notification.

Inhaltsverzeichnis

Andere Laney Verstärker für Musikinstrumente Handbücher

Laney

Laney AudioHub AH40 Bedienungsanleitung

Laney

Laney Audiohub Freestyle Bedienungsanleitung

Laney

Laney IRONHEART FOUNDRY Series Bedienungsanleitung

Laney

Laney GS412PA Bedienungsanleitung

Laney

Laney HCM15 Bedienungsanleitung

Laney

Laney LX120Twin Bedienungsanleitung

Laney

Laney LC50-112 Bedienungsanleitung

Laney

Laney L20T-112 Bedienungsanleitung

Laney

Laney LA65D Bedienungsanleitung

Laney

Laney CUB-SUPER Series Bedienungsanleitung

Laney

Laney Prism P20 Bedienungsanleitung

Laney

Laney IronHeart IRT60H Bedienungsanleitung

Laney

Laney Iommi TI15-112 Bedienungsanleitung

Laney

Laney GS112VE Bedienungsanleitung

Laney

Laney LX120RTWIN Bedienungsanleitung

Laney

Laney TFX3 Bedienungs- und Montageanleitung

Laney

Laney GS412LA Bedienungsanleitung

Laney

Laney LR20 Bedienungsanleitung

Laney

Laney TFX2 Bedienungs- und Montageanleitung

Laney

Laney HCM15B Bedienungsanleitung

Laney

Laney Alliance VH100R Bedienungsanleitung

Laney

Laney Richter Bass RB2 Bedienungsanleitung

Laney

Laney PB 150 HEAD Bedienungsanleitung

Laney

Laney Richer Bass RB1 Bedienungsanleitung

Beliebte Verstärker für Musikinstrumente Handbücher anderer Marken

Peavey

Peavey Wiggy Bedienungsanleitung

acus

acus One Forstreet 10 Bedienungsanleitung

Marshall Amplification

Marshall Amplification MG10KK Bedienungsanleitung

Pyle Pro

Pyle Pro PPG860A Bedienungsanleitung

Vox

Vox Pathfinder 15SMR Bedienungsanleitung

Marshall Amplification

Marshall Amplification JVM205C Bedienungsanleitung

Crate

Crate Professional BV-120H Bedienungsanleitung

Peavey

Peavey Basic 60 Bedienungsanleitung

Fender

Fender Bassman 1200 Bedienungsanleitung

ZT Club Bedienungsanleitung

Ibanez

Ibanez IFS2X Bedienungsanleitung

Crate

Crate GLX1200H Bedienungsanleitung

Laboga

Laboga THE BEAST Bedienungsanleitung

Falken1

Falken1 Traveller Pro Bedienungsanleitung

Hughes & Kettner

Hughes & Kettner Bass Kick 303 Bedienungsanleitung

Yamaha

Yamaha GA-10 Bedienungsanleitung

Engl

Engl Powerball-2 Service-Handbuch

Gibson

Gibson GA5WTR Kurzanleitung