Lantronix Device Server UDS 10 Bedienungsanleitung

Part Number 900-360

Revision A June 2004

UDS10

UDS100

User Guide

transmitted or reproduced in any form or by any means without the written permission

of Lantronix. Printed in the United States of America.

Ethernet is a trademark of XEROX Corporation. UNIX is a registered trademark of

The Open Group. Windows 95, Windows 98, Windows 2000, and Windows NT are

trademarks of Microsoft Corp. Netscape is a trademark of Netscape Communications

Corporation.

Contacts Lantronix

15353 Barranca Parkway

Irvine, CA 92618, USA

Phone: 949-453-3990

Fax: 949-453-3995

Technical Support

Phone: 800-422-7044 or 949-453-7198

Fax: 949-450-7226

Online: www.lantronix.com/support

Email: [email protected]

Sales Offices

For a current list of our domestic and international sales offices, go to the Lantronix

Web site at http://www.lantronix.com/about/contact/index.html

Disclaimer & Revisions

Operation of this equipment in a residential area is likely to cause interference, in

which case the user, at his or her own expense, will be required to take whatever

measures may be required to correct the interference.

Note: This product has been designed to comply with the limits for a Class A

digital device pursuant to Part 15 of FCC Rules. These limits are designed to

provide reasonable protection against such interference when operating in a

commercial environment. This equipment generates, uses, and can radiate

radio frequency energy, and if not installed and used in accordance with this

guide, may cause harmful interference to radio communications.

Changes or modifications to this device not explicitly approved by Lantronix will void

the user's authority to operate this device.

The information in this guide may change without notice. The manufacturer assumes

no responsibility for any errors that may appear in this guide.

Date Part No. Rev. Comments

6/04 900-360 A Initial document combining UDS10 and UDS100 products.

Contents

Contacts 2

1: Using This Guide 8

Purpose and Audience________________________________________________ 8

Chapter Summary ___________________________________________________ 8

Additional Documentation _____________________________________________ 9

2: Introduction 10

Applications _______________________________________________________ 10

Application Examples________________________________________________ 10

Protocol Support ___________________________________________________ 12

Additional Features _________________________________________________ 12

Configuration Methods_______________________________________________ 12

Product Information Label ____________________________________________ 13

3: Getting Started 14

Installing the UDS __________________________________________________ 14

Required Information ________________________________________________ 15

Hardware Address_______________________________________________ 15

IP Address_____________________________________________________ 15

Assigning the IP Address and Related Network Settings ____________________ 16

DeviceInstaller__________________________________________________ 16

Serial Port Login ________________________________________________ 17

4: Configuring the UDS Using Web Manager 18

Accessing Web Manager _____________________________________________ 18

Using Web Manager ________________________________________________ 20

Example_______________________________________________________ 20

5: Configuring the UDS Using Telnet or the Serial Port 22

Using a Telnet Connection ________________________________________ 22

Using the Serial Port _____________________________________________ 23

Server Configuration (Network Configuration) _____________________________ 24

IP Address_____________________________________________________ 24

Set Gateway IP Address __________________________________________ 24

Netmask ______________________________________________________ 24

Change Telnet configuration password _______________________________ 25

DHCP Naming __________________________________________________ 25

Channel 1 Configuration (Serial Port Settings) ____________________________ 26

Baudrate ______________________________________________________ 26

I/F (Interface) Mode ______________________________________________ 26

Flow__________________________________________________________ 27

Port Number ___________________________________________________ 27

Connect Mode __________________________________________________ 28

Manual Connection ______________________________________________ 29

UDS10/UDS100 User Guide

Remote IP Address______________________________________________ 32

Remote Port ___________________________________________________ 32

Disconnect Mode _______________________________________________ 33

Flush Mode ____________________________________________________ 33

Pack Control ___________________________________________________ 34

Disconnect Time (Inactivity Timeout) ________________________________ 35

Send Characters ________________________________________________ 35

Telnet Terminal Type ____________________________________________ 35

Channel (Port) Password _________________________________________ 35

Expert Settings ____________________________________________________ 35

TCP Keepalive time in s __________________________________________ 36

ARP Cache timeout in s __________________________________________ 36

Security Settings ___________________________________________________ 36

Disable SNMP__________________________________________________ 36

SNMP Community Name _________________________________________ 37

Disable Telnet Setup_____________________________________________ 37

Disable TFTP Firmware Upgrade ___________________________________ 37

Disable Port 77FE (Hex) __________________________________________ 37

Disable Web Setup ______________________________________________ 37

Disable ECHO Ports _____________________________________________ 37

Enable Enhanced Password_______________________________________ 37

Factory Default Settings _____________________________________________ 38

Channel 1 Configuration Defaults ___________________________________ 38

Expert Settings Defaults __________________________________________ 38

Security Settings Defaults _________________________________________ 38

Exit Configuration Mode _____________________________________________ 38

6: Updating Firmware 39

Obtaining Firmware _________________________________________________ 39

Reloading Firmware ________________________________________________ 39

Using DeviceInstaller ____________________________________________ 39

Using TFTP____________________________________________________ 40

Using Another Unit ______________________________________________ 41

Using the Serial Port _____________________________________________ 41

7: Using Monitor Mode 43

Entering Monitor Mode Using the Serial Port _____________________________ 43

Entering Monitor Mode Using the Network _______________________________ 43

Using Monitor Mode Commands _______________________________________ 44

8: Troubleshooting and Contact Information 45

LEDs ____________________________________________________________ 45

Problems and Error Messages ________________________________________ 46

Technical Support __________________________________________________ 49

9: Connections and Pinouts 51

Serial Port _____________________________________________________ 51

Serial Connector Pinouts _________________________________________ 51

Null-Modem Cable ______________________________________________ 53

UDS10/UDS100 User Guide

Network Port ___________________________________________________ 53

Ethernet Connector Pinouts _______________________________________ 54

10: Technical Specifications 55

UDS10 Technical Specifications _______________________________________ 55

UDS100 Technical Specifications ______________________________________ 56

A: Alternative Ways to Assign an IP Address 57

DHCP ________________________________________________________ 57

AutoIP ________________________________________________________ 57

BOOTP _______________________________________________________ 58

ARP and Telnet _________________________________________________ 58

B: Binary to Hexadecimal Conversions 59

Converting Binary to Hexadecimal______________________________________ 59

Conversion Table _______________________________________________ 59

Scientific Calculator ______________________________________________ 60

Connect Mode Options ______________________________________________ 61

Disconnect Mode Options ____________________________________________ 64

Flush Mode Options_________________________________________________ 66

Interface Mode Options ______________________________________________ 72

Pack Control Options ________________________________________________ 73

Declaration of Conformity 75

Warranty 76

Index 77

Figures Figure 2-1. Application Examples ________________________________________ 11

Figure 2-2. Sample Ethernet Address _____________________________________ 13

Figure 3-1. UDS Connected to Serial Device and Network _____________________ 14

Figure 4-1. Web Browser Login __________________________________________ 18

Figure 4-2. UDS Configuration Guidelines Page _____________________________ 19

Figure 4-3. Lantronix Web Manager ______________________________________ 20

Figure 4-4. Server Properties Configuration on the Web Browser________________ 21

Figure 5-1. Network Login Using Telnet____________________________________ 22

Figure 5-2. Setup Mode ________________________________________________ 23

Figure 5-3. Network Configuration ________________________________________ 24

Figure 5-4. Server Configuration Option ___________________________________ 26

Figure 5-5. Channel 1 Configuration ______________________________________ 26

Figure 5-6. Hostlist Option ______________________________________________ 30

Figure 5-7. Expert Settings Options_______________________________________ 35

Figure 5-8. Security Settings ____________________________________________ 36

Figure 6-1. TFTP Dialog Box ____________________________________________ 41

Figure 6-2. Sending Firmware to Another Unit_______________________________ 41

Figure 6-3. Firmware Upgrade Screen Display ______________________________ 42

Figure 7-1. Entering Monitor Mode Using the Network ________________________ 43

Figure 9-1. Serial Interface _____________________________________________ 51

Figure 9-2. DB25 Female DCE Interface RS232 _____________________________ 52

Figure 9-3. DB25 Female DCE Interface RS485/422 _________________________ 52

UDS10/UDS100 User Guide

Figure 9-4. Null-Modem Cable (Lantronix Part No. 500-163) ___________________ 53

Figure 9-5. Network Interface ___________________________________________ 53

Figure 9-6. RJ45 Ethernet Connector _____________________________________ 54

Tables Table 5-1. Standard IP Network Netmasks _________________________________ 25

Table 5-2. Netmask Examples __________________________________________ 25

Table 5-3. Interface Mode Options _______________________________________ 27

Table 5-4. Common Interface Mode Settings _______________________________ 27

Table 5-5. Flow Control Options _________________________________________ 27

Table 5-6. Connect Mode Options________________________________________ 28

Table 5-7. Manual Connection Address Example ____________________________ 29

Table 5-8. Modem Mode Commands _____________________________________ 32

Table 5-9. Disconnect Mode Options _____________________________________ 33

Table 5-10. Flush Mode Options _________________________________________ 33

Table 5-11. Pack Control Options ________________________________________ 34

Table 7-1. Monitor Mode Commands _____________________________________ 44

Table 7-2. Command Response Codes ___________________________________ 44

Table 8-1. UDS10/UDS100 LEDs ________________________________________ 46

Table 8-2. Problems and Error Messages__________________________________ 46

Purpose and Audience

This guide provides the information needed to configure, use, and update the UDS

device server. It is for system administrators and those responsible for installing and

maintaining the UDS.

Chapter Summary

The remaining chapters in this guide include:

2: Introduction Describes the main features of the UDS and the protocols it

supports.

3: Getting Started Provides information for installing your unit and getting it up

and running.

4: Configuring the UDS

Using Web Manager

Provides instructions for accessing Web Manager and using

it to configure settings for the UDS.

5: Configuring the UDS

Using Telnet or the Serial

Port

Provides instructions for accessing Setup Mode (command

line interface) using a Telnet connection through the

network or a terminal or terminal emulation program through

the serial port. Details the settings that you must configure.

6: Updating Firmware Provides instructions for obtaining the latest firmware and

updating the UDS.

7: Using Monitor Mode Provides instructions for accessing and using the command

line interface to monitor the network and diagnose

problems.

8: Troubleshooting and

Contact Information

Describes common problems and error messages and how

to contact Lantronix Technical Support.

9: Connections and Pinouts Provides descriptions and illustrations of connection

hardware.

10: Technical Specifications Lists technical specifications for the UDS10 and the

UDS100.

A: Alternative Ways to

Assign an IP Address

Provides detailed information about using DHCP, AutoIP,

BOOTP ARP, and Telnet to assign an IP address.

B: Binary to Hexadecimal

Conversions

Provides instructions on converting binary values to

hexadecimals and tables listing all UDS configuration

options in hexadecimal notation.

UDS10/UDS100 User Guide Using This Guide

Additional Documentation

The following information is available on the product CD or the Lantronix Web

site:www.lantronix.com

DeviceInstaller User Guide Provides instructions for using the Windows-based utility to

configure the UDS and other Lantronix device servers. (CD

and web site)

“Live” Tutorials on the

Lantronix Web Site

Explain and demonstrate Assigning an IP address to the UDS

and Setting up the UDS and the Redirector. See

http://ts.lantronix.com/tutorials.html.

The UDS10 and UDS100 are single-port device servers that provide a quick, simple,

and cost-effective way to bring the advantages of data accessibility and remote

management to devices not currently connected to a network.

The main difference between the two models is that the UDS100 provides both half

and full duplex 10/100 Ethernet data transfer, whereas the UDS10 provides only half

duplex 10Base-T Ethernet. The technical specifications of the two products differ

slightly as well. Unless otherwise noted, we refer to both products as the UDS.

Applications

The UDS family of Device Servers allows serial devices, such as those listed below,

to connect and communicate over Ethernet networks using the IP protocol family

(TCP for connection-oriented stream applications and UDP for datagram

applications).

Security alarms

Access control devices

Fire control panels

Time/attendance clocks and terminals

ATM machines

Data collection devices

RFID readers

Universal Power Supply (UPS) management units

Telecommunications equipment

Data display devices

Virtually any asynchronous RS-232, RS422, or RS485 device.

Application Examples

Using a method called serial tunneling, the UDS encapsulates serial data into

packets and transports them over Ethernet. Using two UDS units, connected by a

network, virtual serial connections can extend across a facility or around the world.

The Com Port Redirector software included on the product CD simplifies the

integration process by extending the functionality of COM-port-based Windows™

applications. Virtual COM ports, mapped to remote device servers on the network,

can replace direct serial connections.

Andere Handbücher für Device Server UDS 10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lantronix Server Handbücher

Lantronix

Lantronix EDS-MD EDS-MD4 Bedienungsanleitung

Lantronix

Lantronix XPress DR Bedienungsanleitung

Lantronix

Lantronix xDirect-IAP Bedienungsanleitung

Lantronix

Lantronix xport pro Bedienungsanleitung

Lantronix

Lantronix SLM Bedienungsanleitung

Lantronix

Lantronix xPico XPW100A003-01-B Kurzanleitung zur Einrichtung

Lantronix

Lantronix Com Port Redirector Bedienungsanleitung

Lantronix

Lantronix xDirect-IAP Bedienungsanleitung

Lantronix

Lantronix MSS4-D Bedienungsanleitung

Lantronix

Lantronix XPort Kurzanleitung zur Einrichtung

Lantronix

Lantronix SCS1600 Bedienungsanleitung

Lantronix

Lantronix UDS1100 Bedienungsanleitung

Lantronix

Lantronix xPort Pro XPP1004000-02R Kurzanleitung zur Einrichtung

Lantronix

Lantronix EDS-MD Series Bedienungsanleitung

Lantronix

Lantronix ETS16PR Bedienungsanleitung

Lantronix

Lantronix xDirect Bedienungsanleitung

Lantronix

Lantronix DSTni-XPress DR Bedienungsanleitung

Lantronix

Lantronix xport pro Kurzanleitung zur Einrichtung

Lantronix

Lantronix XPress DR+ Bedienungsanleitung

Lantronix

Lantronix SLC8 Bedienungsanleitung

Lantronix

Lantronix SCS Bedienungsanleitung

Lantronix

Lantronix SDS1101 Bedienungsanleitung

Lantronix

Lantronix XPico 900-691-R Bedienungsanleitung

Lantronix

Lantronix EDS32PR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung