Lantronix XPress DR+ Bedienungsanleitung

Part Number 900-778-R

Revision DJuly 2022

XPress™DR+

Industrial Device Server

User Guide

XPress™ DR+ Industrial Device Server User Guide 2

Intellectual Property

transmitted or reproduced in any form or by any means without the written permission of

Lantronix.

Lantronix is a registered trademark of Lantronix, Inc. in the United States and other countries.

XPress and DeviceInstaller are trademarks of Lantronix, Inc.

Patented: patents.lantronix.com; additional patents pending.

Windows is a trademark of Microsoft Corporation. Mozilla and Firefox are registered trademarks

of the Mozilla Foundation. All other trademarks and trade names are the property of their

respective holders.

Warranty

For details on the Lantronix warranty policy, please go to our Web site at

www.lantronix.com/support/warranty.

Contacts

Lantronix Corporate Headquarters

48 Discovery, Suite 250

Irvine, CA 92618, USA

Toll Free: 800-526-8766

Phone: 949-453-3990

Fax: 949-453-3995

Technical Support Online: www.lantronix.com/support

Sales Offices

For a current list of our domestic and international sales offices, go to the Lantronix web site at

www.lantronix.com/about/contact .

Disclaimer & Revisions

Operation of this equipment in a residential area is likely to cause interference, in which case the

user, at his or her own expense, will be required to take whatever measures may be required to

correct the interference.

Attention: This product has been designed to comply with the limits for a Class A digital device

pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection

against such interference when operating in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy, and if not installed and used in

accordance with this guide, may cause harmful interference to radio communications.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil num′erique de la classe A est conforme ′a la norme NMB-003 du Canada.

XPress™ DR+ Industrial Device Server User Guide 3

Changes or modifications to this device not explicitly approved by Lantronix will void the user's

authority to operate this device.

The information in this guide may change without notice. The manufacturer assumes no

responsibility for any errors that may appear in this guide.

Revision History

Date

Rev.

Comments

May 2016

Initial document for firmware version 6.11.0.2.

January 2017

Updated for firmware 6.11.0.4.

January 2018

Updated enhanced password information.

July 2022 D Updated for firmware 7.0.0.1. Added new default password, label, and security

information.

XPress™ DR+ Industrial Device Server User Guide 4

Table of Contents

List of Figures_____________________________________________________________ 7

List of Tables _____________________________________________________________ 8

1: Using This Guide 9

Purpose and Audience ______________________________________________________ 9

Summary of Chapters ______________________________________________________ 9

Additional Documentation___________________________________________________ 10

2: Introduction 11

Industrial Automation Protocols ______________________________________________ 12

Network Protocols (Serial Tunneling) __________________________________________ 13

XPress DR+ Application Examples ___________________________________________ 14

Addresses and Port Numbers _______________________________________________ 15

Configuration Methods _____________________________________________________ 16

3: Installation and Hardware 17

What's in the Box? ________________________________________________________ 17

Connecting the XPress DR+ Device Server_____________________________________ 17

XPress DR+ Front Panel ___________________________________________________ 19

Serial Interface ___________________________________________________________ 19

Ethernet Interface_________________________________________________________ 22

Power Requirements ______________________________________________________ 23

Reset Switch ____________________________________________________________ 24

LEDs___________________________________________________________________ 25

Dimensions______________________________________________________________ 26

Wall Mount Bracket _______________________________________________________ 26

Product Information Label __________________________________________________ 27

4: Using DeviceInstaller 28

Installing DeviceInstaller____________________________________________________ 28

Assigning an IP Address ___________________________________________________ 28

Accessing the XPress DR+ Using the DeviceInstaller Application ____________________ 29

5: Configuration Using Web Manager 32

Accessing XPress DR+ Using DeviceInstaller ___________________________________ 32

Network Configuration _____________________________________________________ 34

Server Configuration ______________________________________________________ 36

Host List Configuration _____________________________________________________ 37

Table of Contents

XPress™ DR+ Industrial Device Server User Guide 5

Channel Configuration _____________________________________________________ 38

Applying Settings _________________________________________________________ 46

Applying Factory Defaults___________________________________________________ 46

6: Configuration Using Telnet/Serial Port (Setup Mode) 47

Accessing Setup Mode_____________________________________________________ 47

Exiting Setup Mode _______________________________________________________ 49

7: Setup Mode: Server Configuration 50

Server Configuration (Option 0) ______________________________________________ 50

8: Setup Mode: Channel Configuration 53

Channel 1 (Option 1) and Channel 2 (Option 2)__________________________________ 53

Baudrate________________________________________________________________ 53

Interface (I/F) Mode _______________________________________________________ 54

Flow ___________________________________________________________________ 55

Port Number _____________________________________________________________ 55

Connect Mode ___________________________________________________________ 56

Send the Escape Sequence (+++) in Modem Mode_______________________________ 62

Show IP Address After Ring_________________________________________________ 63

Auto Increment Source Port _________________________________________________ 63

Remote IP Address _______________________________________________________ 63

Remote Port _____________________________________________________________ 63

DisConnMode____________________________________________________________ 63

Flush Mode (Buffer Flushing) ________________________________________________ 64

Pack Control_____________________________________________________________ 65

DisConnTime (Inactivity Timeout) ____________________________________________ 66

Send Characters _________________________________________________________ 66

Telnet Terminal Type ______________________________________________________ 67

Channel (Port) Password ___________________________________________________ 67

9: Setup Mode: Advanced Settings 68

Expert Settings (Option 5) __________________________________________________ 68

Security Settings (Option 6) _________________________________________________ 69

Default Settings (Option 7) __________________________________________________ 72

10: Firmware Upgrades 74

Obtaining Firmware _______________________________________________________ 74

Reloading Firmware _______________________________________________________ 74

11: Monitor Mode 77

Table of Contents

XPress™ DR+ Industrial Device Server User Guide 6

12: Troubleshooting 80

Problems and Error Messages_______________________________________________ 80

DHCP __________________________________________________________________ 87

AutoIP__________________________________________________________________ 87

BOOTP_________________________________________________________________ 88

ARP and Telnet __________________________________________________________ 88

Converting Binary to Hexadecimal ____________________________________________ 89

RoHS, REACH and WEEE Compliance Statement _______________________________ 92

XPress™ DR+ Industrial Device Server User Guide 7

List of Figures

Figure 2-1. XPress DR+ (Front) ______________________________________________ 12

Figure 2-2. Example of Serial Tunneling with Com Port Redirector ___________________ 14

Figure 2-3. Example of Cascading Multiple XPress DR+ Units ______________________ 15

Figure 3-1. Typical Configuration _____________________________________________ 18

Figure 3-2. Front of XPress DR+ _____________________________________________ 19

Figure 3-3. RJ45 Connector – Front View ______________________________________ 20

Figure 3-4. Screw Terminal Ports_____________________________________________ 21

Figure 3-5. Termination Resistor for 2-Wire Connection ___________________________ 21

Figure 3-6. Lantronix P/N 500-103-R RJ45-DB9F Serial Cable Pinout ________________ 22

Figure 3-7. Multi-Drop Ethernet Connections ____________________________________ 23

Figure 3-8. Reset Switch ___________________________________________________ 24

Figure 3-9. LEDs on the XPress DR+ _________________________________________ 25

Figure 3-10. Dimensions ___________________________________________________ 26

Figure 3-11. Wall Mount Bracket _____________________________________________ 26

Figure 3-12. Product Label__________________________________________________ 27

Figure 5-1. Lantronix Web Manager___________________________________________ 33

Figure 5-2. Network Settings ________________________________________________ 34

Figure 5-3. Server Settings__________________________________________________ 36

Figure 5-4. Hostlist Settings _________________________________________________ 38

Figure 5-5. Channel Serial Settings ___________________________________________ 39

Figure 5-6. TCP Connection Settings__________________________________________ 42

Figure 5-7. UDP Connection Settings _________________________________________ 45

Figure 5-8. Apply Settings __________________________________________________ 46

Figure 6-1. MAC Address___________________________________________________ 48

Figure 6-2. Setup Menu Options _____________________________________________ 48

Figure 8-1. Serial Port Parameters____________________________________________ 53

Figure 8-2 Hostlist Option___________________________________________________ 59

Figure 9-1. Expert Settings__________________________________________________ 68

Figure 9-2. Security Settings ________________________________________________ 69

Figure 10-1. TFTP Window _________________________________________________ 75

Figure 11-1. Accessing Monitor Mode _________________________________________ 77

XPress™ DR+ Industrial Device Server User Guide 8

List of Tables

Table 3-1. RJ45 Serial Connector Pinouts ______________________________________ 20

Table 3-2. Serial Screw Terminal Pinout for RS-422 (4-Wire) _______________________ 20

Table 3-3. Serial Screw Terminal Pinout for RS-485 (2-Wire) _______________________ 20

Table 3-4. Ethernet Interface Signals__________________________________________ 22

Table 3-5.Typical RJ45 Connector (View from Connector End)______________________ 23

Table 3-6. XPress DR+ LED Functions ________________________________________ 25

Table 4-1. Viewing Current Settings___________________________________________ 29

Table 7-1. BootP/DHCP/AutoIP options ________________________________________ 50

Table 7-2. Standard IP Network Netmasks _____________________________________ 51

Table 8-1. Interface Mode Options ____________________________________________ 54

Table 8-2. Common Interface Mode Settings____________________________________ 54

Table 8-3. Flow Control Options______________________________________________ 55

Table 8-4. Reserved Port Numbers ___________________________________________ 55

Table 8-5 Connect Mode Options_____________________________________________ 56

Table 8-6 Manual Connection Address Example ________________________________ 58

Table 8-7 Modem Mode Messages ___________________________________________ 61

Table 8-8 Modem Mode Commands __________________________________________ 62

Table 8-9 Disconnect Mode Options __________________________________________ 64

Table 8-10 Flush Mode Options ______________________________________________ 64

Table 8-11 Pack Control Options _____________________________________________ 65

Table 10-1. Firmware Files__________________________________________________ 74

Table 11-1. Monitor Mode Commands _________________________________________ 78

Table 11-2. Command Response Codes _______________________________________ 79

Table 12-1. Problems and Error Messages _____________________________________ 80

XPress™ DR+ Industrial Device Server User Guide 9

1:Using This Guide

Purpose and Audience

This user guide describes and provides the information needed to configure, use, and update the

Lantronix® XPress™ DR+ industrial device server. These device servers are members of the

XPress family that work with Industrial Automation Protocols (IAP). It is for system administrators

and those responsible for installing and maintaining these device servers.

Summary of Chapters

The remaining chapters in this guide include:

Chapter

Description

2: Introduction

Describes the main features of the XPress DR+ and the

protocols it supports.

3: Installation and Hardware

Describes the unit's interfaces and power requirements.

Provides instructions for physically connecting the unit.

4: Using DeviceInstaller

Provides information for getting your unit up and running,

using DeviceInstaller to assign an IP address.

5: Configuration Using Web Manager Details using the Web Manager to set parameters such as

port and server properties.

6: Configuration Using Telnet/Serial Port

(Setup Mode)

Provides instructions for accessing Setup Mode (command

line interface) using a Telnet connection through the network

or a terminal or terminal emulation program through the serial

port.

7: Setup Mode: Server Configuration

Details the network (server) settings.

8: Setup Mode: Channel Configuration

Details the serial port settings.

9: Setup Mode: Advanced Settings Details email, expert, and security settings and explains how

to reset the unit to factory default values.

10: Firmware Upgrades

Provides instructions for obtaining the latest firmware and

updating the XPress DR+.

11: Monitor Mode

Provides instructions for accessing and using the command

line interface for monitoring the network and diagnosing

problems.

12: Troubleshooting

Describes common problems and error messages.

A: Technical Support

Provides information for obtaining Lantronix Technical

Support.

B: Technical Specifications

Lists technical information about the unit.

C: Lantronix Cables and Adapters

Provides information on cables and adapters specific to the

XPress DR+ industrial device server.

D: Alternative Methods of Assigning an IP

Address

Describes other ways to assign an IP address, for example,

though ARP and Telnet.

1: Using This Guide

XPress™ DR+ Industrial Device Server User Guide 10

Chapter

Description

E: Binary and Hexadecimal Conversions

Provides instructions for converting binary numbers to

hexadecimals.

F: Compliance Information

Provides the Declaration of Conformity and other regulatory

information.

Additional Documentation

Visit the Lantronix Web site at www.lantronix.com/support/documentation for the latest

documentation and the following additional documentation.

Document

Description

XPress DR+ Industrial

Device Server Quick Start

Guide

Provides the steps for getting the XPress DR+ up and running.

Com Port Redirector Quick

Start and Com Port

Redirector Online Help

Provides information on using the Windows®-based utility to create a virtual

com port.

DeviceInstaller Online Help

Provides information on using the Lantronix DeviceInstaller™ application to

locate Lantronix devices on the network and configure IP addresses.

Live tutorials on the

Lantronix Web Site

Explain and demonstrate assigning an IP address and setting up the unit and

the Redirector. See http://ltxfaq.custhelp.com/app/answers/detail/a_id/1119.

Note: The instructions for the UDS products apply to the XPress DR+ as

well.

Modbus Protocol User

Guide

Provides guides for the protocols, such as Modbus Bridge, which you can

load on the XPress DR+ industrial device server.

Com Port Redirector Quick

Start and Com Port

Redirector Online Help

Provides information on using the Windows®-based utility to create a virtual

com port.

Andere Handbücher für XPress DR+

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lantronix Server Handbücher

Lantronix

Lantronix UDS1100 Bedienungsanleitung

Lantronix

Lantronix MatchPort AR Kurzanleitung zur Einrichtung

Lantronix

Lantronix EDS32PR Bedienungsanleitung

Lantronix

Lantronix ETS16PR Bedienungsanleitung

Lantronix

Lantronix SCS Bedienungsanleitung

Lantronix

Lantronix EDS8PS Bedienungsanleitung

Lantronix

Lantronix EDS-MD Series Bedienungsanleitung

Lantronix

Lantronix SCSxx05 Bedienungsanleitung

Lantronix

Lantronix UDS2100 Bedienungsanleitung

Lantronix

Lantronix EDS-MD EDS-MD4 Installationshandbuch

Lantronix

Lantronix EDS32PR Bedienungsanleitung

Lantronix

Lantronix PremierWave XN Bedienungsanleitung

Lantronix

Lantronix XPort Direct Kurzanleitung zur Einrichtung

Lantronix

Lantronix CoBox E2 01 Bedienungsanleitung

Lantronix

Lantronix SLM Bedienungsanleitung

Lantronix

Lantronix xSenso 2100 Bedienungsanleitung

Lantronix

Lantronix EDS32PR Bedienungsanleitung

Lantronix

Lantronix UDS200 Bedienungsanleitung

Lantronix

Lantronix MSS1-T Bedienungsanleitung

Lantronix

Lantronix EDS3000PR Bedienungsanleitung

Lantronix

Lantronix C 7/01 Bedienungsanleitung

Lantronix

Lantronix WiPort NR Bedienungsanleitung

Lantronix

Lantronix SLB Bedienungsanleitung

Lantronix

Lantronix xSenso 2100 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung