Larson Electronics WAL-TP.S-RL16-LED Bedienungsanleitung

WAL-TP.S-RL16-LED

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com

1of 1

Rechargeable LED Work Area Light with 3.5' to 10' Adjustable Tripod Mount

1000 Lumens - IP67

Instruction Manual

Thank you for your purchase of the Larson Electronics WAL-TP.S-RL16-LED.

)

WARNING:

READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

CRITICAL SAFETY INSTRUCTIONS:

•INSTALLATION SHOULD ONLY BECONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANY

RELEVANT LOCAL BUILDING CODES.

•RISK OFFIRE OR ELECTRIC SHOCK. FIXTURE INSTALLATION REQUIRES KNOWLEDGE OF FIXTURE'S ELECTRICAL

SYSTEMS. IFNOTQUALIFIED, CONTACT A QUALIFIED ELECTRICIAN.

•BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.

•MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE FIXTURE'S RATED VOLTAGE.

•TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR SHARP

OBJECTS. SUITABLE FOR DAMP LOCATIONS.

IMPORTANT

READ CAREFULLY BEFORE INSTALLING THIS FIXTURE. SAVE THESE INSTRUCTIONS FOR FUTURE

REFERENCE. THE WAL-TP.S-RL16-LED MUST BE WIRED IN ACCORDANCE WITH NATIONAL ELECTRICAL CODE

AND ALL APPLICABLE LOCAL CODES. PROPER GROUNDING IS REQUIRED FOR SAFETY.

WE STRONGLY ENCOURAGE ONLY A LICENSED ELECTRICIAN INSTALL, OPERATE AND MAINTAIN THIS

PRODUCT. IF YOU ARE NOT QUALIFIED OR UNFAMILIAR WITH ANY ASPECT OF THIS INSTRUCTION SHEET,

CONSULT AN ELECTRICIAN. THERE ARE NO SERVICEABLE PARTS INSIDE.

WARNING: MAKE SURE POWER IS TURNED OFF BEFORE STARTING THE

INSTALLATION OR PERFORMING ANY MAINTENANCE.

RISK OF FIRE/ELECTRIC SHOCK –DISCONNECT POWER AT BREAKER BEFORE INSTALLING OR SERVICING.

RISK OF PERSONAL INJURY –FIXTURE MAY BECOME UNSTABLE OR DAMAGED IF NOT INSTALLED PROPERLY.

RISK OF BURN –ALLOW FIXTURE TO COOL BEFORE SERVICING.

Never place spotlight face down when light is on. Doing so could burn/ignite surfaces such as seats, carpeting, etc. and

cause major property damage. Always turn spotlight off when not in use.

Avoid direct eye exposure the light source when light is on. DO NOT shine light into the face of someone else.

DO NOT touch lens of light when on or recently on. The lens/cooling fins will be hot after long periods.

DO NOT allow children to handle or operate this light.

DO NOT use this product for other than its intended use.

DO NOT operate in close proximity of combustible or flammable materials.

DO NOT attempt to operate this light if cord, plug, battery, lens or any part of the light is damaged or corroded.

The WAL-TPS-RL16-LED from Larson Electronics is a Tripod Mounted Rechargeable LED Work Light that offers a

portable and convenient source of high-intensity LED light. With no power cord to get in the way, this tripod mounted

LED light is an ideal solution for illuminating areas that don`t have traditional power sources readily available. The

lightweight design and IP67 waterproof rating allow this tripod to be utilized in a wide variety of work areas.

Low Voltage DC

Connect power to power supply outputting low voltage between 9-42Volts DC.

This variable voltage allows greater versatility without affecting light output. Ensure

deutsch connectors are properly connected (If applicable)

WAL-TP.S-RL16-LED

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com

2of 2

USING THE TRIPOD

1. To assemble the tripod, begin by loosening the black adjustment knob on the

tripod base. Slide the center polethrough the adjustment sleeve until the legs

are fully deployed. Tighten adjustment knob so legs stay fixed in place.

2. Loosen black adjustment knob for each sleeve to extend tripod. Extend top

pole, then bottom pole when elevating.

3. Tighten adjustment knob once desired height is achieved.

OPERATION

The WAL-TP.S-RL16-LED features a rechargeable LED light head that produces 1000 lumens of high-intensity LED light

on the high setting and 500 lumens on the low setting when less lighting power is needed or desired. A single sealed push

button allows the operator to easily switch between high and low settings. Do not look directly into lens when powering.

Lamp can be adjusted independently with the adjustment boltholding it in place. Tighten bolts once desired angle is

achieved.

Battery/Charging

The rechargeable lithium ion battery powers this light for up to 4 hours on high and 8 hours on low. The WAL-TPS-RL16-

LED is shipped with both an AC and DC charger power supplies. Recharging from a fully depleted state takes 6 hours.

-Light Head

Adjustment

Points

-Leg Sleeve

MOUNTING

The WAL-TPS-RL16-LED is equipped with an adjustable aluminum tripod that can reach heights up to 10 feet and can be

lowered to 3.5 feet for applications where a lower height is required or for storage and transportation. The heavy duty

aluminum tripod is durable, lightweight and adjustable to any length between 3.5 feet and 10 feet. A single mounting

bracket holds the LED light and allows it to be adjusted and aimed horizontally and vertically. This adjustability allows

users to expand the area covered or to focus more intense coverage on a smaller area. The tripod legs can be collapsed

and the light head bracket removed with the light still on it for simple portability and deployment. The heavy duty

construction of this tripod and the light weight of the LED fixture results in a portable yet very stable lighting platform that

will hold its position, even in very windy conditions.

MAINTENANCE

There are no serviceable parts inside the fixture. However, it is good practice to routinely clean and check the

fixture for proper function.

•Disconnect power running to the lamp and be sure the fixture is cool to the touch.

•Use a non-abrasive glass cleaning solution to clean the lens.

Note: It is not necessary to open the fixture and clean or touch the LED’s.

USE AND CARE

Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.

Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of

children when not in use. Inspect for good working condition prior to storage and before re-use.

REPLACEMENT PARTS

The EPP-20A-25P is designed to provide years of reliable performance. Should the need for replacement parts arise,

please contact Larson Electronics.

THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.

SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT

SALES@LARSONELECTRONICS.COM OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE.

PLEASE VISIT LARSONELECTRONICS.COM FOR WARRANTY AND RETURN INFORMATION.

Inhaltsverzeichnis

Andere Larson Electronics Arbeitsleuchte Handbücher

Larson Electronics

Larson Electronics WAL-QP-2X500LTL-LED-100 Bedienungsanleitung

Larson Electronics

Larson Electronics AML-LED-WP40-M-22C Handbuch

Larson Electronics

Larson Electronics WAL-TP-2X50E-1224 Bedienungsanleitung

Larson Electronics

Larson Electronics LEDWP-600E-DLC-5000K Bedienungsanleitung

Larson Electronics

Larson Electronics GL-9900 Handbuch

Larson Electronics

Larson Electronics GNM-LEDWL-25W Handbuch

Larson Electronics

Larson Electronics EPL-BS-150HPS Series Handbuch

Larson Electronics

Larson Electronics WL-LED-12-M Bedienungsanleitung

Larson Electronics

Larson Electronics EPL-FL-26 Bedienungsanleitung

Larson Electronics

Larson Electronics WAL-SBDL-WP60E-XX-1227 Bedienungsanleitung

Larson Electronics

Larson Electronics LEDWP-600E-OS Handbuch

Larson Electronics

Larson Electronics L810 Bedienungsanleitung

Larson Electronics

Larson Electronics LEDP5W-12LT Bedienungsanleitung

Larson Electronics

Larson Electronics WAL-BP-3XLED-CPR Bedienungsanleitung

Larson Electronics

Larson Electronics RL-85-LED-36W-CPR Bedienungsanleitung

Larson Electronics

Larson Electronics EHL-LED-240X12V-50 Bedienungsanleitung

Larson Electronics

Larson Electronics WDL-12-IPS-LED-1227 Bedienungsanleitung

Larson Electronics

Larson Electronics EHL-LED-15W-50-HR Bedienungsanleitung

Larson Electronics

Larson Electronics EPL-QC-16C-2X50LED-RT-X24V-C1D1-12.3-100-EPP Bedienungsanleitung

Larson Electronics

Larson Electronics RSLED Bedienungsanleitung

Larson Electronics

Larson Electronics WAL-DL-60LED-M-GCR50-SP0002 Bedienungsanleitung

Larson Electronics

Larson Electronics LEDWP-250E-DLC-5000K Handbuch

Larson Electronics

Larson Electronics EPL-16C-1MLED-300 Bedienungsanleitung

Larson Electronics

Larson Electronics EXPRL-98 Bedienungsanleitung

Beliebte Arbeitsleuchte Handbücher anderer Marken

ANSMANN

ANSMANN POWERLIGHT 5.1 Bedienungsanleitung

RTRMAX

RTRMAX RTX1868 Bedienungsanleitung

FeinTech

FeinTech LAL00220 Bedienungsanleitung

Bunker Hill Security

Bunker Hill Security 64735 Bedienungsanleitung

Goobay

Goobay 30450 Bedienungsanleitung

REV Ritter

REV Ritter SPOT Bedienungsanleitung

Ignition

Ignition Stagepix Line 100 IP Bedienungsanleitung

SCANGRIP

SCANGRIP DUO CONNECT Bedienungsanleitung

Bosch

Bosch GLI 18 V Bedienungsanleitung

Bayco

Bayco SL-1514 Bedienungsanleitung

EUFAB

EUFAB SMD LED 8+1 Bedienungsanleitung

DeWalt

DeWalt DCL510 Bedienungsanleitung

PowerSmith

PowerSmith PWLD080T Bedienungsanleitung

MaxLite

MaxLite 73683 Bedienungsanleitung

Heitronic

Heitronic Trend 27867 Bedienungsanleitung

Monzana

Monzana Gore MZCL10 Bedienungsanleitung

EINHELL

EINHELL TE-CL 18/2000 LiAC Bedienungsanleitung

Bayco

Bayco NIGHTSTICK Dual-Light Xtreme Lumens... Bedienungsanleitung