Lathem PC600 Series Bedienungsanleitung

Model PC600

User’s Guide

THIS EQUIPMENT COMPLIES WITH FCC REQUIREMENTS

PURSUANT OF PART-15

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

WARNING: Changes or modifications to this product not expressly approved by the party

responsible for compliance could void the user’s authority to operate this equipment.

NOTE: This equipment has been tested and found to comply with the limits, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a business installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio TV technician for help.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appariel numerique de la classe A est conforme a la norme NMB-003 du Canada.

Lathem Time Corporation

200 Selig Drive, SW

Atlanta, Georgia USA 30336

(800) 241-4990

(404) 691-0400

www.lathem.com

Revised 11-09-2010 Document Number: USG0092

CONTENTS

QUICK START STEPS ..................................................................................IV

WELCOME........................................................................................................1

PACKAGE CONTENTS ...........................................................................5

SYSTEM REQUIREMENTS....................................................................6

INSTALL THE PC600......................................................................................7

USING THE PC600 TERMINAL.............................................................9

INSTALLTHEPAYCLOCKSOFTWARE.......................................................27

SETTING UP A MULTI-USER SYSTEM.............................................31

USING THE PAYCLOCK SOFTWARE......................................................32

LOGGING INTO PAYCLOCK..............................................................34

SETTING UP PAYCLOCK............................................................................37

ADDITIONAL SOFTWARE SETUP.....................................................40

ADD EMPLOYEES AND ASSIGN BADGES.......................................42

EDITING TIMECARDS.................................................................................47

GLOBAL SCHEDULING...............................................................................62

REPORTS ........................................................................................................63

SETTING UP YOUR TERMINAL................................................................65

ACTIVATING LIVE SYNC....................................................................71

HARDWARE TROUBLESHOOTING.........................................................73

SOFTWARE TROUBLESHOOTING...........................................................75

APPENDIX A - PC600 WAN INSTALLATION..........................................76

APPENDIX B - PAYCLOCK CLIENT SOFTWARE WAN

INSTALLATION.............................................................................................79

APPENDIX C - CONNECTING THE PC600 DIRECTLY TO THE

COMPUTER’S NIC ........................................................................................82

whole or in part is strictly prohibited. This document may contain typographical or copy errors.

PayClock, Lathem, the Lathem logo, and all other Lathem product names mentioned in this

document are registered trademarks of Lathem Time Corporation. All other products, brand names,

or company names mentioned in this document are properties and trademarks or registered

trademarks of their respective companies.

Quick Start Steps

Carefully follow each step of these instructions for a trouble-

free experience.

Note: It is recommended to install and mount the PC600 terminal

before installing the PayClock software. With the PC600 terminal

powered up and connected to the network (LAN), the software will

search for it on the network and automatically configure the terminal.

Select a location that will be convenient to

employees punching In/Out. Also keep in

mind that a 115vAC power outlet should

be within 6 feet as well as a connection to

the network (LAN).

For more detailed information turn to

page 7.)

Verify the contents of your system. (For

more detailed information turn to page

5.)

Use masking tape to hold the included

mounting template onto the wall. Drill

the holes using the template as a guide.

Note: The bottom of the terminal

should be about 45 inches from the

floor.

Remove the template and install the

mounting screws, using the plastic wall

anchors if needed. Leaving about 3/16”

of the screw exposed.

Plug the RJ45 network cable into the

Ethernet port and the Power Adapter

plug into the Power Adapter port which

is located in the compartment on back

of the terminal. Route the cabling

through the available channels to best

suit your installation.

Hang the terminal on the wall, aligning

the three keyholes on the rear of the

terminal with the protruding screw

heads, and then press downward until

the terminal lowers onto the screws.

Align the “L” - shaped security bracket

into the slot at the bottom-rear of the

PC600 and screw it into place. This will

fasten the terminal to the wall.

Remove the plastic cover from the

display and plug the Power Adapter into

an AC wall outlet.

Install the PayClock Software. (For more

detailed instructions turn to page 27.)

Important Notes

Make sure your screen saver is not

showing before inserting the installation

CD’s.

Open and close the CD-ROM drawer if the

CD is not recognized when inserted.

Verify your computer meets the

Minimum System Requirements listed in

this User Guide, turn to page 6.

Open the PayClock software by

clicking on the PayClock Icon. The

default password is lathem. (For more

detailed instructions turn to page 34.)

Click Setup Now from the Get

Started window to configure

PayClock. (For more detailed

instructions turn to page 37.)

Add employees as well as create

supervisors using the Employees

button under the Setup tab.

To add a new employee, click New

and then enter the employee data.

To create a supervisor, select the

desired employee and check Allow

Supervisor Functions under

Options.

(For more detailed instructions turn

to page 42).

After adding the employees click on

the Terminal Manager tab.

Activate Live Sync and update your

terminal(s).

(For more detailed instructions turn

to page 71).

PAYCLOCK & PC600 USER’S GUIDE

Welcome

Purpose of this User’s Guide

The purpose of this user’s guide is not meant to be a complete

manual for the product. It is a quick reference to get you started.

Please refer to the PayClock Help for detailed product information,

setup guidance, and operation information.

Product Overview

Reliability, functionality and ease of use are trademarks of the

PayClock software and terminals. With the PC600 terminal,

employees can use a badge or PIN to punch in and out, view

messages or benefit time balances – it’s that simple. The PayClock

software and PC600 terminals are the ideal solution for businesses

that want to track employee time and automate payroll.

The PC600 terminal connects to your network for communications

with the PayClock time and attendance software. The terminal

utilizes a powerful Windows CE based application and a touch-panel

display for inputting data by employees, supervisors or

administrators. The PC600 terminal validates that the employee is in

the database before recording the transaction.

The PC600 can operate in “Live Sync” (online mode). When

operating with Live Sync enabled (online mode), communications

with the pc are in real-time. For example, when an employee punches

at the PC600 it is immediately added to the database and is available

for viewing or editing. Another example is if the employee does an

inquiry, the PC600 will initiate communications with the database

and retrieve the inquiry information and display it on the screen.

When operating with Live Sync disabled (offline mode), all

transactions are held in the terminals memory until the terminal is

polled, and then the data will be added to the database.

The PC600 terminal offers a large color LCD touch-panel that

displays employee information along with an audio prompt. Upon a

PAYCLOCK & PC600 USER’S GUIDE

successful transaction with live sync enabled, the display will show

the employee’s name, total worked time, In / Out status and an

audio/text prompt. With live sync disabled, the display will only

show the employees name.

Features and Specifications

•Windows CE 6.0 - The power of embedded Windows CE to

provide fast and dependable operation.

•LCD Color Touch-Panel - Use the large easy to read touch-

panel for set up and data entry.

•Two Operating Modes - The terminal is functional with Live

Sync enabled (online) or Live Sync disabled (offline). When

Live Sync is enabled the terminal is real-time with the

computer.

•User friendly design - Large easy to read touch-panel.

•Comprehensive support agreements minimize technical

difficulties.

•Numerous accessory options to enhance the functionality.

Upgrades

If you find that you need to accommodate more employees in your

system or if you would like enhanced software capabilities, consider

purchasing a software upgrade for your system. A number of

accessories are offered to further enhance your PayClock system.

•Increased employee capacity

•Customized reporting options

•Customized export options

•Multi-user capabilities

Upgrading is as easy as visiting http://shop.lathem.com or open

PayClock and click on the PayClock orb in the upper left corner and

select Upgrade PayClock. Then select the options you would like to

purchase and download your software upgrade. Options are instantly

activated upon receipt of online payment.

PAYCLOCK & PC600 USER’S GUIDE

Accessories

A number of accessories are offered to further enhance your

PayClock system. Visit http://shop.lathem.com to purchase

additional accessories like the ones listed below.

•Badges

•Badge Racks

•Annual Support Agreements

Getting Help

The purpose of this user’s guide is not meant to be a complete

manual for the product. It is a quick reference to get you started.

Please refer to the PayClock Help for detailed product information,

setup guidance, and operation information.

You can access the help desk and answers to your issues in a number

of different ways. In addition to resources within the PayClock

software, assistance may be accessed online, via email, via telephone,

or through your dealer. Don’t forget annual support contracts are

also offered.

PayClock Help

The PayClock Help allows you to search through an index of help

topics to locate the answer you need. To launch the Help, click the

Help button on the ribbon bar.

Troubleshooting

For answers to Frequently Asked Questions, refer to the

Troubleshooting sections of this User Guide on page 73 and 75.

Online and Email Support

Lathem.com provides access to numerous support resources that will

allow you maximize your use of PayClock. Help may be accessed by

visiting the following link:

http://support.lathem.com

PAYCLOCK & PC600 USER’S GUIDE

On the Support page, you may also submit a question through our

online knowledgebase and one of our technicians will respond to

your inquiry within 24 hours. Email support is free to all registered

users.

Telephone Support

The help desk is available between the hours of 8am and 7pm

Monday through Friday. Please call (800) 241-4990 to speak with

our help desk. You will receive free technical support for the first 30

days after your initial call. After that period, you may purchase an

Annual Support Agreement which will cover all calls for one year or

you may pay a per-call fee.

Annual Support Agreements

Annual support contracts are designed to keep your terminal and

PayClock software working seamlessly. For a single annual fee, your

Support Agreement offers the following advantages:

•Unlimited toll-free telephone support (versus a per-call fee)

and priority status for calls

•Unlimited access to the extensive library of web-based tips

and FAQs

•Free software updates and version upgrades during the

Support Period, giving you free access to the most current

software features

•Quick exchanges for damaged or broken terminal, thereby

reducing downtime

•Extended parts and labor warranty helps you to save money

on repairs needed after the regular product warranty has

expired

To learn more about annual support contracts and to make a

purchase, contact us at (800) 241-4990 or visit

http://www.lathem.com/support/support-plans.aspx

Andere Handbücher für PC600 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lathem IP-Zugriffskontrollsysteme Handbücher

Lathem

Lathem FaceIN FR700 Bedienungsanleitung

Beliebte IP-Zugriffskontrollsysteme Handbücher anderer Marken

ZKTeco

ZKTeco SpeedFace-V5L Bedienungsanleitung

Jantar

Jantar REX A-1-9 Bedienungsanleitung

2N Access Unit Merkblatt

Kedacom

Kedacom KSCA120 Series Bedienungsanleitung

H3C

H3C WX2880X Bedienungsanleitung

G4S

G4S S870-EX Leitfaden

PRASTEL

PRASTEL M2000PE Bedienungsanleitung

Allegion

Allegion interflex IF-281 Cylinder Bedienungsanleitung

TECOM

TECOM TS1067E Bedienungsanleitung

Fermax

Fermax Memokey 100C Benutzerhandbuch

Fermax

Fermax CITYLINE MEMOKEY Bedienungsanleitung

Software House

Software House iSTAR Pro 2U RM Bedienungsanleitung

AKCP

AKCP SP+ Bedienungsanleitung

Bpt

Bpt HNA/102 Bedienungsanleitung

Civintec

Civintec CV9601T-T-1F Bedienungsanleitung

BioMax

BioMax N-X90W Bedienungsanleitung

ZKTeco

ZKTeco OP-200 Bedienungsanleitung

FingerTec

FingerTec s-Kadex Bedienungsanleitung