LATICRETE STRATA_HEAT Bedienungsanleitung
Globally Proven
Construction Solutions
Globally Proven
Construction Solutions
See reverse for installation guide
Non WiFi Operating Guide
2
INTRODUCTION
The STRATA_HEAT™Programmable Thermostat default screen is the home screen. Pressing the temperature figure in the center of the
screen allows you to override it. Pressing the menu button allows you to start programming and setting up the STRATA_HEAT Programmable
Thermostat. You’ll often find a help button on pages with several options to give more information.
If you do not press any button for 1 minute, the STRATA_HEAT Programmable Thermostat screen will dim and revert to the home screen. To
wake the STRATA_HEAT Programmable Thermostat just tap the screen or press Wake.
To turn the thermostat on or off, press the power button on the bottom of the device for 3 seconds.
3
GETTING STARTED
On initial power up the STRATA_HEAT™Programmable Thermostat will ask you to connect to set up various aspects:
IMPORTANT!
Ensure you choose the correct System Type. Electric (underfloor), Hydronic (underfloor) or Conventional (central heating with radiators).
4
nLanguage
nTime
nDate
nDaylight Savings
nHeating Type
nTemperature Display
nTheme
nBrightness
nAudio Feedback
nFloor Type
nHeating Control Type
nHeating Program Schedule
nEnergy Monitor Settings
5
SET YOUR HEATING PROGRAM
With your STRATA_HEAT™Programmable Thermostat, you can choose to set a custom heating schedule, fixed temperature or a preset
program designed for different rooms.
To adjust the program, you must highlight the days that you want to program by pressing them, then press Program. You can select multiple days in
any combination, such as weekdays only, to program separate weekday and weekend temperatures. To do this, program all the weekdays at once and
then program the weekend when you’re finished.
The programming works by setting Comfort Periods of warm temperatures, shown with a green line. Any time not covered by a Comfort Period will
use a lower Setback temperature to save energy. The default setback temperature is 60°F (15°C)and you can change this once you’ve set up your
program if needed.
You can add up to 5 Comfort Periods per day and when you’ve set what you want, just press Done. You’ll see the summary of your program which
you can edit by repeating the steps above, or just press Accept to set your program.
Remember: The STRATA_HEAT Programmable Thermostat can also learn your schedule and program itself. To activate
this, set it into Learning Mode.
6
7
PRESET PROGRAMS
You can select a preset program schedule to get you started. You can edit the program whenever you like by following the steps in Set Your
Heating Program.
Below is a summary of the Preset Programs.
Bathroom Kitchen Bedroom Living Room
Time Temp Time Temp Time Temp Time Temp
Mon-Fri 6:00 am
8:00 am
7:00 pm
11:00 pm
77°F (25°C)
50°F (10°C)
68°F (20°C)
59°F (15°C)
6:00 am
8:00 am
6:00 pm
10:00 pm
73°F (23°C)
50°F (10°C)
73°F (23°C)
50°F (10°C)
6:00 am
8:00 am
8:00 pm
11:00 pm
77°F (25°C)
50°F (10°C)
68°F (20°C)
50°F (10°C)
6:00 pm
9:30 pm
73°F (23°C)
50°F (10°C)
Sat-Sun 7:00 am
11:00 am
6:00 pm
11:00 pm
77°F (25°C)
64°F (18°C)
68°F (20°C)
59°F (15°C)
7:00 am
11:00 am
6:00 pm
10:00 pm
73°F (23°C)
64°F (18°C)
73°F (23°C)
50°F (10°C)
6:00 am
8:00 am
8:00 pm
11:00 pm
77°F (25°C)
50°F (10°C)
68°F (20°C)
50°F (10°C)
8:00 am
6:00 pm
8:00 pm
73°F (23°C)
68°F (20°C)
50°F (10°C)
HOLIDAY MODE
Holiday Mode allows you to override your schedule with a fixed temperature over a number of days. This helps you save energy when you know
you’ll be away for a while by setting a lower temperature. Holiday Mode can be found in the Program menu
Just set the start and end times of your holiday, or leave the end time as Unspecified, if you want Holiday Mode to run indefinitely. Then set the
temperature you want when you’re away.
GRADUAL START
Gradual Start allows you to bring your floor up to temperature slowly, which is required for some floor finishes such as solid wood, and can also be
found in the Program menu.
Enter the maximum temperature and the time required to reach that temperature to set Gradual Start. Different floors have different requirements
so please contact your floor installer or supplier for advice on how to set Gradual Start correctly.
FROST PROTECT
Select Frost Protect mode to set your heating to 40°F (4°C). This will help protect your home from frost and will run continuously until you raise
the temperature again.
8
9
ENERGY MONITOR
The STRATA_HEAT™Programmable Thermostat learns how you use your system and how your house reacts to the heating and weather. It
can give you an estimate of your energy usage and the running cost of your system.
You will need to enter the power of your system, and in some cases, the efficiency. If you do not know these, speak to your installer or go to
mystrataheat.com and use our online Heat Requirement Calculator.
You will also need to enter the cost of your energy, in order to calculate the running cost of your system. Press Energy Settings, and select if you
have a single rate or a standard/low energy rate (where you have a discounted cost during part of the day). Enter your cost per KWH and relevant
currency and, if required, the time the low energy rate starts and stops and the discounted cost during that time.
When you’ve set up the Energy Monitor you can view the estimated usage or cost over a selected time period. If you have a standard/low energy
rate, the amount and cost of energy used during the standard period will be displayed in dark green and the amount used in the low period will be
displayed in light green.
10
Andere Handbücher für STRATA_HEAT
2
Inhaltsverzeichnis
Sprachen:
Andere LATICRETE Thermostat Handbücher
LATICRETE
LATICRETE Programmable Thermostat Bedienungsanleitung
LATICRETE
LATICRETE STRATA HEAT Bedienungsanleitung
LATICRETE
LATICRETE STRATA HEAT TDS 215 Bedienungsanleitung
LATICRETE
LATICRETE STRATA HEAT Kurzanleitung
LATICRETE
LATICRETE STRATA_HEAT Kurzanleitung
LATICRETE
LATICRETE STRATA-HEAT TDS 408 Bedienungsanleitung
LATICRETE
LATICRETE STRATA HEAT Bedienungsanleitung
LATICRETE
LATICRETE STRATA HEAT TDS 263 Benutzerhandbuch
LATICRETE
LATICRETE STRATA HEAT Kurzanleitung
LATICRETE
LATICRETE STRATA_HEAT Bedienungsanleitung
Beliebte Thermostat Handbücher anderer Marken
EWELLY
EWELLY EW-181 Bedienungsanleitung
Prolon
Prolon T1100 Montageanleitung
Computherm
Computherm Q20 Bedienungsanleitung
Heatmiser
Heatmiser neoStat Bedienungsanleitung
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung
