LAUER EPC PM 2100 Bedienungsanleitung

EPC PM Nautic

Installation Manual

MAEN971, 2009-01 English

Foreword

Elektronik-Systeme Lauer, MAEN971

EPC PM Nautic Installation Manual

Foreword

The EPC PM Nautic series consists of enhanced Panel IPCs, compatible with

the toughest of maritime environments. Shock and vibration resistant and func-

tional throughout comprehensive temperature changes, the series features a

robust hard-disk drive, fanless CPU and Windows XP as the standard operating

system.

The series also offers the option of modifying a number of its features, affording

a customized version with a flash-memory, fanless chassis and Windows XP

embedded.

The rugged EPC PM Nautic series provides an open platform solution that can

be utilized with the customer’s choice of software to meet the demands any ma-

rine environment with high performance reliability that's built to last.

This manual describes each model and gives instructions on installation, opera-

tion and service.

Please read the entire installation manual prior to installing and using this equipment. Only qualified

personnel may install, operate or repair this equipment. Elektronik-Systeme Lauer GmbH & Co. KG is

not responsible for modified, altered or renovated equipment. Because the equipment has a wide range of

applications, users must acquire the appropriate knowledge to use the equipment properly in their

specific applications.

Persons responsible for the application and the equipment must themselves ensure that each application

is in compliance with all relevant requirements, standards and legislation in respect to configuration and

safety. Only parts and accessories manufactured according to specifications set by Elektronik-Systeme

Lauer GmbH & Co. KG may be used.

ELEKTRONIK-SYSTEME LAUER GMBH & CO. KG SHALL NOT BE LIABLE TO ANYONE

FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES

RESULTING FROM THE INSTALLATION, USE OR REPAIR OF THIS EQUIPMENT,

WHETHER ARISING IN TORT, CONTRACT, OR OTHERWISE. BUYER'S SOLE REMEDY

SHALL BE THE REPAIR, REPLACEMENT, OR REFUND OF PURCHASE PRICE, AND THE

CHOICE OF THE APPLICABLE REMEDY SHALL BE AT THE SOLE DISCRETION OF

ELEKTRONIK-SYSTEME LAUER GMBH & CO. KG.

Contents

Elektronik-Systeme Lauer, MAEN971

Contents

1 Safety Precautions................................................................................... 5

1.1 Nautic Approvals and Certificates .......................................................5

1.2 General ...............................................................................................6

1.3 During Installation..............................................................................7

1.4 During Use .........................................................................................7

1.5 Service and Maintenance.....................................................................8

1.6 Dismantling and Scrapping.................................................................8

2 Supplied Equipment ............................................................................... 9

3 Description of Parts.............................................................................. 10

3.1 EPC PM Nautic................................................................................10

3.2 Display..............................................................................................11

3.3 Communication Ports 230 V AC......................................................12

3.4 Communication Ports 24 V DC .......................................................12

3.5 Configuration of COM4...................................................................13

3.6 Motherboard.....................................................................................14

3.7 Assembly...........................................................................................14

3.8 Power Supply ....................................................................................15

3.9 Earthing System ................................................................................16

3.10 ATX Power Switch............................................................................16

4 Operation ............................................................................................. 17

4.1 Operating System..............................................................................17

4.2 BIOS Settings ...................................................................................18

4.3 Important Items Regarding

Software Installation..........................................................................19

4.4 Touch Screen Installation..................................................................20

4.5 Graphic Board Installation ................................................................24

4.6 Installation of LAN-/Network Card..................................................25

Contents

Elektronik-Systeme Lauer, MAEN971

5 Service .................................................................................................. 27

5.1 Introduction......................................................................................27

5.1.1 Tools .................................................................................................27

5.1.2 Preparation........................................................................................27

5.1.3 Opening the EPC PM Nautic ...........................................................27

5.2 Changing the Fan..............................................................................28

5.3 PCI-board Installation.......................................................................30

5.4 Memory Module ...............................................................................35

6 Technical Data ..................................................................................... 39

7 Drawings .............................................................................................. 41

7.1 EPC PM 1500t/1500 Nautic Front View..........................................41

7.2 EPC PM 1500t/1500 Nautic Cut Out Drawing ...............................42

7.3 EPC PM 1500t/1500 Nautic Outline Drawings ...............................43

7.4 EPC PM 1700t/1700 Nautic Front View..........................................44

7.5 EPC PM 1700t/1700 Nautic Cut Out Drawing ...............................45

7.6 EPC PM 1700t/1700 Nautic Outline Drawings ...............................46

7.7 EPC PM 1900t/1900 Nautic Front View..........................................47

7.8 EPC PM 1900t/1900 Nautic Cut Out Drawing ...............................48

7.9 EPC PM 1900t/1900 Nautic Outline Drawings ...............................49

7.10 EPC PM 2100t/2100 Nautic Front View..........................................50

7.11 EPC PM 2100t/2100 Nautic Cut Out Drawing ...............................51

7.12 EPC PM 2100t/2100 Nautic Outline Drawings ...............................52

Safety Precautions

Elektronik-Systeme Lauer, MAEN971 5

1 Safety Precautions

Both the installer and the owner and/or operator of the EPC must read and un-

derstand this installation manual.

1.1 Nautic Approvals and Certificates

The EPC PM Nautic series are certified according to the following list:

Model CE LR BV GL DNV ABS RS CCS KR EN

60945

EPC PM 1500t/

1500 Nautic XXXX*X*X**

EPC PM 1700t/

1700 Nautic XXXXXXXX*X*X**

EPC PM 1900t/

1900 Nautic XXXXXXXX*X*X**

EPC PM 2100t/

2100 Nautic XXXXXXXX*X*X**

* In progress

** For bridge applications

Approval/Certificate Abbreviation

Conformité Européene CE

Lloyd’s Register LR

Bureau Veritas BV

Germanischer Lloyd GL

Det Norske Veritas DNV

American Bureau of Shipping ABS

Russian Maritime Register of Shipping RS

China Classification Society CCS

Korean Register of Shipping KR

Safety Precautions

6Elektronik-Systeme Lauer, MAEN971

1.2 General

– Read the safety precautions carefully.

– Check the delivery for transportation damage. If damage is found, notify the

supplier as soon as possible.

– Do not use the EPC in an environment with high explosive hazards.

– The supplier is not responsible for modified, altered or reconstructed equip-

ment.

– Use only parts and accessories manufactured according to specifications of the

supplier.

– Read the installation and operating instructions carefully before installing, us-

ing or repairing the EPC.

– Never allow fluids, metal filings or wiring debris to enter any openings in the

EPC. This may cause fire or electrical shock.

– Only qualified personnel may operate the EPC.

– Storing the EPC where the temperature is lower/higher than recommended

in this manual can cause the LCD display liquid to congeal/become isotopic.

– The LCD display liquid contains a powerful irritant. In case of skin contact,

wash immediately with plenty of water. In case of eye contact, hold the eye

open, flush with plenty of water and get medical attention.

– The figures in this manual serves an illustrative purpose. Because of the many

variables associated with any particular installation, the supplier cannot as-

sume responsibility for actual use based on the figures.

– The supplier neither guarantees that the EPC is suitable for your particular

application, nor assumes responsibility for your product design, installation

or operation.

Safety Precautions

Elektronik-Systeme Lauer, MAEN971 7

1.3 During Installation

– The EPC is designed for stationary installation on a plane surface, where the

following conditions are fulfilled:

• no high explosive risks

• no strong magnetic fields

• no direct sunlight

• no large, sudden temperature changes

– Install the EPC according to the accompanying installation instructions.

– Ground the EPC according to the accompanying installation instructions.

– Only qualified personnel may install the EPC.

– Separate the high voltage, signal and supply cables.

– Make sure that the voltage and polarity of the power source is correct before

connecting the EPC to the power outlet.

– Peripheral equipment must be appropriate for the application and location.

– The controlling transformer has to comply with EN60742.

1.4 During Use

– Keep the EPC clean.

– Emergency stop and other safety functions may not be controlled from the

EPC.

– Do not use too much force or sharp objects when touching the keys, touch

screen etc.

Safety Precautions

8Elektronik-Systeme Lauer, MAEN971

1.5 Service and Maintenance

– Only qualified personnel should carry out repairs.

– The agreed warranty applies.

– Before carrying out any cleaning or maintenance operations, disconnect the

equipment from the electrical supply.

– Clean the display and surrounding front cover with a soft cloth and mild de-

tergent.

– Replacing the battery incorrectly may result in explosion. Only use batteries

recommended by the supplier.

1.6 Dismantling and Scrapping

– The EPC or parts thereof shall be recycled according to local regulations.

– The following components contain substances that might be hazardous to

health and the environment: lithium battery, electrolytic capacitor and dis-

play.

Supplied Equipment

Elektronik-Systeme Lauer, MAEN971 9

2 Supplied Equipment

Part Description

CD; operating system CD with operating system.

CD; driver software Driver software CD for all pre-installed components

such as mother board, touch screen, keyboard etc.

Power cable Standard power cable (European or US standard) for

units with 230 V AC power supply.

Length: approximately 3.0 m.

24 V DC units are delivered without cable.

Installation manual This manual describes specific information about

Elektronik-Systeme Lauer products only – not about

third party components.

Note:

Separate documentation of third party components is

included on the enclosed driver software CD + as

printed documentation.

Mounting kit 8 x M6x25 screws

Description of Parts

10 Elektronik-Systeme Lauer, MAEN971

3 Description of Parts

3.1 EPC PM Nautic

The EPC PM Nautic consists of a Front Unit and a PC Unit. These are installed

in the same way independent of the display size.

Front unit

PC unit

Andere Handbücher für EPC PM 2100

Inhaltsverzeichnis

Andere LAUER Touchscreen Handbücher

LAUER

LAUER EPC PM 2100 Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung