Launch Creader Professional 123 Series Bedienungsanleitung

Quick Start Guide

Display Tablet

123X

There are two charging methods available:

Via Charging Cable: Plug one end of the included charging cable into

the 5V charging port of the tool, and the other end to the external DC

power.

Via Diagnostic Cable: Insert one end of the diagnostic cable into the

DB-15 connector of the tool, and the other end to the vehicle's DLC.

Once the charging LED illuminates solid green, it indicates that the

battery is fully charged.

Press the [Power] button to power it on.

If it is the first time you have used this tool, you need to make some

system settings and keep the diagnostic software synchronized with

the latest version.

Follow the steps below to proceed.

Charging & Turning On

Getting Started

Tap “Start” on Welcome screen

Select system language

Select time zone

WLAN setup

Configure email address

Sign user agreement

Job Menu appears

Tap “Update”

LAUNCH

*Note: After you configured it,

the system will automatically

send the diagnostic report to your

email box every time a complete

Auto-Detect process is

successfully finished.

*Note: To enjoy more capabilities

and better service, you are

strongly recommended to update

it on regular basis.

*Note: If you choose "Ignore" in

this step, it will go into the date

setting page. If the tool has been

properly connected to the Internet,

the system will automatically

obtain the correct network date and

time.

8" Touch Screen

Selection Buttons

HOME Button

Charging LED

OK Button

Return Button

(Red: Charging.

Green: Fully

charged.)

Power/Screen

Lock Button

DB-15 Diagnostic Connector

5V Charging Port

(To connect to vehicle's DLC (Data

Link Connector) via diagnostic cable.)

(To connect to external DC

power for charging the tool.)

Quick Start Guide

123X

Preparation

Diagnostic Cable

1. Turn the ignition off.

2. Locate vehicle's DLC: It

provides standard 16 pins

and is generally located on

driver's side, about 12

inches away from the

center of dashboard. See

Figure DLC Location. If

DLC is not equipped under

dashboard, a label

indicating its position will

be given.

3. Plug one end of the diagnostic cable into the DB-15 connector of

the tool, and tighten the captive screws. Connect the other end to

the vehicle's DLC.

Vehicle

DLC

Display Tablet

*Note: The tool ONLY works with the 12V passenger cars equipped with

standard OBD-II diagnostic socket.

4. Turn the ignition key on.

In case no DLC is found, please refer to Automobile Repair Manual.

Start Diagnostics

AutoDetect and manual diagnosis are supported. If the AutoDetect

fails, you can choose to input the VIN manually or exit the AutoDetect

session to switch to manual diagnosis mode.

Tap “Diagnose”*

Start decoding vehicle VIN

Decoding OK Decoding failed

Double check vehicle info.

Select vehicle manufacturer

Scan all vehicle systems

Select vehicle make

Output diagnostic report

Select test system

Select diagnostic function*

Diagnostic Flowchart Manual Diagnosis Flowchart

*If you are fresh to vehicle

diagnostics, you are suggested

to use "DEMO" to get familiar

with the diagnostic process.

Input the VIN, and tap "OK", the system will automatically identify the

vehicle model. If the vehicle VIN is successfully decoded, it will perform

auto-diagnosis until a diagnostic report is automatically output.

*Note: The most recognizable location for VIN is in the top left corner on the

vehicle's dashboard. Other locations include the driver's door or post, and the

firewall under the hood.

*Note: If "Automatic detection on connect" in "Settings" is set as ON, this

step can be ignored.

overseas.service@cnlaunch.com

+86 755 8455 7891

制作要求：

原始文件大小： 210mm x 148mm, 按1:1输出，正反两面

印刷要求：黑白印刷, 80g内页纸

正面

Andere Launch Diagnosegeräte Handbücher

Launch

Launch Creader Professional 123X Bedienungsanleitung

Launch

Launch X-431 IMMO Pro Bedienungsanleitung

Launch

Launch X-431 V+ Bedienungsanleitung

Launch

Launch ROXIE W Bedienungsanleitung

Launch

Launch X-431 PADII Bedienungsanleitung

Launch

Launch CReader Professional CRP329 Bedienungsanleitung

Launch

Launch X-431 PAD V Bedienungsanleitung

Launch

Launch Creader Professional 123E Bedienungsanleitung

Launch

Launch CRP 349 Bedienungsanleitung

Launch

Launch X-431 PADII Bedienungsanleitung

Launch

Launch X-431 Torque LINK Bedienungsanleitung

Launch

Launch X-431 PADII Bedienungsanleitung

Launch

Launch X431 V Bedienungsanleitung

Launch

Launch FX9000 Bedienungsanleitung

Launch

Launch X-431 PROS V4.0 Bedienungsanleitung

Launch

Launch X-431 PROS MINI Bedienungsanleitung

Launch

Launch X-431 Throttle III Bedienungsanleitung

Launch

Launch X-431 PROS V4.0 Bedienungsanleitung

Launch

Launch X-431 PAD V Bedienungsanleitung

Launch

Launch X-431 V+ Bedienungsanleitung

Launch

Launch X-431 PAD V Bedienungsanleitung

Launch

Launch X-431 Torque HD Bedienungsanleitung

Launch

Launch CRT 7 Series Bedienungsanleitung

Launch

Launch M-Diag Lite Bedienungsanleitung

Beliebte Diagnosegeräte Handbücher anderer Marken

Mindray

Mindray M7Vet Kurzanleitung

Autel

Autel MaxiProgrammer 201 Bedienungsanleitung

TEXA

TEXA TMD2 Bedienungsanleitung

Autel

Autel MaxiIM IM608 Bedienungsanleitung

Sealey

Sealey BT2012 Bedienungsanleitung

Diagnoptics

Diagnoptics Age Reader Bedienungsanleitung

LAUNCH TECH

LAUNCH TECH X-431 PRO5 Bedienungsanleitung

Hella Gutmann

Hella Gutmann Mega macs X Bedienungsanleitung

Foxwell

Foxwell I80TS Bedienungsanleitung

KaVo

KaVo 3D eXam Bedienungsanleitung

ATEQ

ATEQ VT46 Bedienungsanleitung

Hella Gutmann

Hella Gutmann mega macs X Bedienungsanleitung

Autel

Autel MaxiFlash VCMI Bedienungsanleitung

Qiagen

Qiagen QIAcube Connect MDx Bedienungsanleitung

Alber

Alber BDSU Bedienungsanleitung

St. Jude Medical

St. Jude Medical QUANTIEN Bedienungsanleitung

Bosch

Bosch DCU 100 Bedienungsanleitung

Innova

Innova 3568 Bedienungsanleitung