LeapFrog LF80 Montageanleitung

Parent Guide

This guide contains important information.

Please keep it for future reference.

LF80

Audio Baby Monitor

Index

Install | Setup

Operate

What's in the box?

Charge the battery

Night Light

Set up a timer with alarm

Configure | Settings

Sound Alert & VOX (Voice Activated) Sensitivity

Restore to default settings

Basic Set Up

Before Use: Test and Position your Audio Monitor

Change the faceplate

Power on/off the audio monitor

Baby Unit Overview

Parent Unit Overview

Parent Unit Menu Structure

Navigate the menu

Parent Unit Icons

Adjust speaker volume (parent unit and baby unit)

Talk to your baby

Lullaby and Recorded Voice

Important safety instruction

Technical information

Disposal of batteries and product

Customer service and product warranty 37

Install | Setup

What's in the box? - - LF80

LF80 Parent Unit

LF80 Baby Unit

DDocumentocumentatationion

Learn to set up your units and have all detailed instructions on using your audio baby monitor.

Faceplates

Basic Set Up - - LF80

So you have just unboxed your LF80, what's next?

Follow the steps below for a basic set up walk-through.

1. Install the Parent Unit and Baby Unit batteries

The baby unit and parent unit can run on rechargeable battery or AC power. To continuously monitor your

baby, it is recommended to use both battery and AC power at the same time.

Install the batteries as shown below:

Switch on the baby unit and parent unit by pressing and holding

If you have two baby units, make sure they are both connected to power and turned on.

2. Connect and power on the Parent Unit and Baby Unit

Stra

tion

awayfrom the child at all times.Do not

usewith an extension cord. Do not

removethis tag.

Él

piedsd’un enfant et ce,en tout tem

N’utilisezpas de rallonge.Neretirez pa

cetteétiquette.

lomenostres pies fuera de la alcance

delniño en todo momento. No lo use

conuna extensión inalámbrica. No qu

estaetiqueta.

ite

squ

glem

d’ét ent

ngul

cies ón

Stra

tion

awayfrom the child at all times. Do not

ewith an extension cord. Do not

movethis tag.

Él

piedsd’un enfant et ce,en tout tem

N’utilisezpas de rallonge.Neretirez pa

cetteétiquette.

lomenostres pies fuera de la alcance

delniño en todo momento. No lo use

conuna extensión inalámbrica. No qu

estaetiqueta.

ite

Risq

anglem

d’ét ent

cióes n

Next, connect the parent unit and baby unit to a power supply with the included power adapters. Make

sure the power jack is inserted firmly. Then, switch them on by pressing and holding

on each respective unit. If you have two baby units, make sure they are both connected to power and

turned on.

The parent unit takes eight hours of continuous charging to fully charge and be ready for optimal use. In

the meantime, why not take a break or play with the kids?

Note: The battery standby time also varies depending on the sensitivity level you set, your actual use and

the age of the batteries.

3. Status check

After you power on both your baby unit and parent unit, the baby unit's power light turns on.

Allow some time for the parent unit and baby unit to connect to each other.

If the parent unit is out of range of the baby unit, or the baby unit is out of power, the parent unit beeps

and its LCD displays NOT LINKED. If that occurs:

• Move the parent unit closer to the baby unit.

• Make sure the baby unit is powered on.

BBefore Use: Test and Position your Audio Monitor -

LF80

Testing the audio monitor

You may test your baby monitor before initial use, and at regular times thereafter.

Caution

• For hearing protection, make sure the parent unit is more than 6.5 feet (2 meters) away from the baby unit. If you hear any feedback, move the

parent unit further until the noise stops. You can also press

on the parent unit to lower or mute the noise.

1. Make sure your baby unit and parent unit are on.

2. Speak towards the microphone of the baby unit. You will hear your voice transmitting from the parent

unit, and see the visual sound indicators light up.

Note

• When the parent unit displays NOT LINKED and flashes, move the parent unit closer to the baby unit while observing the minimum distance of

6.5 feet/2 meters.

Tip

• Increase the speaker volume of the parent unit if you cannot hear the sounds transmitted from the baby unit.

Positioning the baby monitor

1. Place the baby units more than 3 feet (1 meter) away from your baby.

Caution

Keep the baby units out of the reach of your baby. Never place or mount the baby units inside the baby’s crib or playpen.

The default speaker volume of your parent unit is level 3. If you experience feedback from your baby monitor while positioning:

Make sure your baby unit and parent unit are more than 6.5 feet (2 meters) apart, OR

Turn down the volume of your parent unit.

1. To avoid interference from other electronic devices, place your baby monitor at least 3 feet (1 meter)

away from devices such as wireless routers, microwaves, cell phones and computers.

2. Place the parent unit more than 6.5 feet (2 meters) away from the baby unit.

Caution

Charge the battery - - LF80

When you have connected and turned on the parent unit and baby unit, the batteries will charge

automatically.

Note:

Before using the baby monitor for the first time, charge the parent unit and baby unit batteries for 12

hours.

The standby time varies depending on your actual use and the age of the batteries.

The battery icon indicates the battery status (see the following table).

Battery Indicators Battery Status Action

The parent unit beeps and

the screen displays

The batteries are in low

power and may be used for

only a short time.

Charge without interruption.

The recommended charging

time from low to full battery is

at least 10 hours, for both baby

unit and parent unit.

The battery icon becomes

solid

The batteries are fully charged. To keep the batteries

charged, connect it to AC

power when not in use.

Andere Handbücher für LF80

Inhaltsverzeichnis

Andere LeapFrog Babyphone Handbücher

LeapFrog

LeapFrog LF1726FHD Montageanleitung

LeapFrog

LeapFrog LF2423 Montageanleitung

LeapFrog

LeapFrog LF915HD Bedienungsanleitung

LeapFrog

LeapFrog LF915HD Montageanleitung

LeapFrog

LeapFrog LF930HD Bedienungsanleitung

LeapFrog

LeapFrog LF2423 Montageanleitung

LeapFrog

LeapFrog LF925HD Montageanleitung

LeapFrog

LeapFrog Advanced Baby Monitor Bedienungsanleitung

LeapFrog

LeapFrog LF815HD Montageanleitung

LeapFrog

LeapFrog LF2423 Bedienungsanleitung

LeapFrog

LeapFrog LF2936FHD Montageanleitung

LeapFrog

LeapFrog LF2415 Bedienungsanleitung

LeapFrog

LeapFrog LF920HD Montageanleitung

LeapFrog

LeapFrog LF2415 Montageanleitung

LeapFrog

LeapFrog LF915HD Montageanleitung

LeapFrog

LeapFrog LF1911 Bedienungsanleitung

LeapFrog

LeapFrog LF915HD Montageanleitung

LeapFrog

LeapFrog LF815HD Montageanleitung

LeapFrog

LeapFrog LF80 Montageanleitung

LeapFrog

LeapFrog LF925HD Montageanleitung

LeapFrog

LeapFrog LF815HD Bedienungsanleitung

LeapFrog

LeapFrog LF920HD Bedienungsanleitung

LeapFrog

LeapFrog LF815HD-2 Montageanleitung

LeapFrog

LeapFrog LF2513 Montageanleitung

Beliebte Babyphone Handbücher anderer Marken

Philips

Philips SCD 469 Bedienungsanleitung

Oricom

Oricom Babysense 7 Bedienungsanleitung

Levana

Levana TW502 Bedienungsanleitung

Luvion

Luvion Essential Bedienungsanleitung

Philips

Philips AVENT SCD841 Bedienungsanleitung

NUK

NUK Eco Control Video Display 550VD Bedienungsanleitung

Lorex

Lorex sweet peek mini Bedienungsanleitung

Mondevices

Mondevices MonBaby 2 Bedienungsanleitung

Famidoc

Famidoc FDBB-V2 Bedienungsanleitung

Graco

Graco iMonitor 2797 Bedienungsanleitung

babymoov

babymoov High Care A014001 Bedienungsanleitung

Ramili

Ramili RV1000 Bedienungsanleitung

Philips

Philips SBC SC364 Bedienungsanleitung

Swann

Swann SW231-FLO Bedienungsanleitung

Badabulle

Badabulle Baby Online 300 m+ Bedienungsanleitung

Philips AVENT

Philips AVENT SCD526/00 Bedienungsanleitung

Uniden

Uniden Guardian UBR223 Bedienungsanleitung

Summer

Summer Day & Night 28470A Bedienungsanleitung