Lechange F Series Bedienungsanleitung

Quick Start Guide

Version 1.0.0

Contents

Quick Start Guide___________________________________________________ 1

Packing List ____________________________________________________ 11

Product Appearance _____________________________________________ 12

Operation by Lechange App _______________________________________ 23

Add Alarm Sensor _______________________________________________ 34

Device Installation _______________________________________________ 45

Kurzanleitung ______________________________________________________ 5

Lieferumfang ___________________________________________________ 51

Überblick ______________________________________________________ 52

Bedienung über Lechange-App_____________________________________ 63

Alarmsensor hinzufügen __________________________________________ 74

Installation des Geräts____________________________________________ 85

Guía de inicio rápido _______________________________________________ 10

Contenido ____________________________________________________ 101

Apariencia del producto__________________________________________ 102

Funcionamiento usando la aplicación Lechange_______________________ 123

Añadir el sensor de alarma _______________________________________ 124

Instalación del dispositivo ________________________________________ 135

Guide de démarrage rapide __________________________________________ 15

Contenu de l’emballage__________________________________________ 151

Différentes faces du produit_______________________________________ 152

Fonctionnement avec l’application Lechange _________________________ 173

Ajouter le capteur de l’alarme _____________________________________ 174

Installation de l’appareil__________________________________________ 185

Snelstartgids______________________________________________________ 20

Paklijst _______________________________________________________ 201

Kenmerken van het product_______________________________________ 202

Bediening via de Lechange App ___________________________________ 213

Voeg een alarmsensor toe________________________________________ 224

Installatie van het apparaat _______________________________________ 235

Guida introduttiva__________________________________________________ 25

Contenuto della confezione_______________________________________ 251

Come si presenta il prodotto ______________________________________ 252

Funzionamento tramite app Lechange ______________________________ 273

Aggiunta del sensore di allarme____________________________________ 274

Installazione dispositivo__________________________________________ 285

Guia de Início Rápido_______________________________________________ 30

Lista da embalagem ____________________________________________ 301

Aspeto do produto ______________________________________________ 302

Operação pela Aplicação Lechange ________________________________ 323

Adicionar sensor de alarme_______________________________________ 324

Instalação do dispositivo _________________________________________ 335

Quick Start Guide

Packing List1

Device *1 QSG *1Power Adapter *1

Screw Package *1 Quick Installation Board *1 Installation Position Map *1 USB *1

Product Appearance2

Figure 2-1

Note

To reset, long press for 10 seconds till the light is off; to enable WPS, just press the

button.

Figure 2-2

Please refer to Table 2-1 for more details about status of indicator light.

Indicator light status

Device status

Spinning red

Booting

Device malfunction

Failed to boot up

Spinning green

Booting completed

Waiting for Wi-Fi configuration

Flashing yellow

WiFi connection process.

Flashing green

Pairing with alarm sensor.

Blue light stably on

Wi-Fi connection succeeded

Operate normally

Flashing blue



Device upgrade

Flashing yellow

Device has been configured with WiFi, but it failed to work

normally.

Flashing red

Alarm or SD card malfunction.

Pairing failed.

Table 2-1

Operation by Lechange App3

Step 1 Power on your camera with power adapter.

Step 2 Connect your smartphone to your Wi-Fi network, scan “Lechange” QR on

the packing box, download and install Lechange App.

Step 3 Run Lechange App, and register account for first use.

Step 4 Follow the steps below to add your camera (Figure 3-1).

Figure 3-1

Note

- If you have more cameras, please follow step 4 to add them one by one.

- If you want to change the Wi-Fi signal, please reset the camera to factory default

and repeat step 4 to add the camera.

Add Alarm Sensor4

Note

- The alarm sensor is not included by default; you need to purchase it separately if

necessary.

- There are two ways to add alarm sensor.

Method 1

Step 1 Press camera Reset/Pair button for 2s to enter pairing mode, and then the

green light flashes.

Step 2 Press the pair button of alarm sensor and the indicator light will flash

quickly and continuously.

Step 3 The green light of camera will stop flashing if pairing succeeds; the red light

will flash for 10s and then disappear if pairing fails.

Method 2

Scan the QR code on the device with Lechange app, and then follow app guide to

operate.

Device Installation5

Note

Before installation, please make sure the installation environments can at least

support 3x weight of the device.To install the device, do the following.

Step 1 Drill holes on the wall and install the

expansion bolts into the drilled holes.

Step 2 Fix the installation board with screws

onto the wall.

Step 3 Spin the device to get locked onto the

installation board.

Disclaimer

- This quick start guide is for reference only.

Minor difference might be found in user interface.

- All the designs and software here are subject to change without prior written

notice.

- All trademarks and registered trademarks mentioned are the properties of their

respective owners.

- Please visit our website or contact your local service engineer for more

information.If there is any uncertainty or controversy, please refer to our final

explanation.

Kurzanleitung

Lieferumfang1

1 x Gerät 1 x Kurzanleitung 1 x Netzteil

1 x Befestigungsmaterial 1 x Montageplatte 1 x Montageschablone 1 x USB-Kabel

Überblick2

Abbildung 2-1

Netzteil

microSD-Kartensteckplatz

Netzwerkanschluss

LED-Anzeige

Rücksetz-/Kopplungstaste

Hinweis

Zum Zurücksetzen halten Sie die WPS/Rücksetztaste für 10 Sekunden gedrückt,

bis die Anzeige erlischt. Um WPS zu aktivieren, drücken Sie die Taste einmal kurz.

Abbildung 2-2

Nähere Informationen zum Status der LED finden Sie unter Tabelle 2-1.

Anzeigestatus

Gerätestatus

Rotierendes Rot

• Gerät fährt hoch

• Gerätestörung

• Hochfahren fehlgeschlagen

Rotierendes Grün

• Hochfahren abgeschlossen

• Warten auf WLAN-Konfiguration

Gelb blinkend

• WLAN-Verbindung läuft

Grün blinkend

• Kopplung mit Alarmsensor

Blaue LED leuchtet

• WLAN erfolgreich verbunden

• Funktioniert ordnungsgemäß

Blau blinkend

• Geräteaktualisierung

Gelb blinkend

• Mit WLAN verbunden, aber Gerät ist

Rot blinked

• Alarm oder SD-Karte Fehlfunktion

• Kopplung fehlgeschlagen

Tabelle 2-1

Bedienung über Lechange-App3

Schritt 1 Verbinden Sie Ihre Kamera mit dem mitgelieferten Netzteil

Mikrofon

Objektiv

Inhaltsverzeichnis

Sprachen:

Andere Lechange Sicherheitskamera Handbücher

Lechange

Lechange LOOC Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung