Lec+ BC6097K Bedienungsanleitung

USER MANUAL

EfficienC Bottle Cooler Range

Applicable Models:

BC6097K/BC6097ST

BC9097K/BC9097ST

www.lec-commercial.co.uk 2

1 - IMPORTANT INFORMATION

Contents

1Important Information

Useful Information page 3

Unpacking page 4

Warranty page 4

Positioning page 5

Electrical Connection page 6

Safety Information page 7

Before plugging in page 8

Using Appliance for First Time page 8

Important Refrigerant Information page 8

2. Using Your Appliance

Product Details page 9

Internal Light page 10

Doors page 10

Shelves page 10

Adjusting the Feet page 10

Controller Overview page 11

Controller Operation page 12

Energy Saving Tips page 13

Storage page 13

Disposal page 13

3. Care & Maintenance of Your Appliance

Defrosting page 14

Cleaning Instructions page 15

4. Troubleshooting, Service & Repairs

Troubleshooting, Service & Repairs page 16

After Sales Support page 16

What Spares do we offer? page 16

Replacing the Door Gasket page 17

Replacing the Light Bulb page 17

Troubleshooting page 18

FAQ’s page 19

Contact Information page 20

www.lec-commercial.co.uk 3

Useful Information

We strongly recommend that you spend some time to fill in the information below and

keep it in a safe place. This will save you time if you need to contact our After Sales

team.

IMPORTANT: The Model Number, Product Code and Serial Number can all be found on

the data plate located on the interior of your appliance.

Model Number:

Product Code:

Serial Number:

Date of Purchase:

/ /

Purchased from:

...............................................................................................................................................

Please take some time to fill in the information above and keep it in a safe place.

This will save you time if you need to contact our After Sales team.

www.lec-commercial.co.uk 4

Thank you for purchasing this Lec Commercial Bottle Cooler. Whilst

unpacking, please carry out the following actions

Check the bottle cooler has not been damaged in any way during transportation.

If any damage is found, it MUST be reported to our After Sales department

immediately by calling 0844 815 3755.

When unpacking the appliance, ensure that all packaging has been removed,

including cardboard, polystyrene and any tape used to hold the shelves in place

during transportation.

The bottle cooler has been cleaned prior to dispatch; however, we advise that it

should be cleaned before use. We recommend a solution of one teaspoonful of

Bicarbonate of soda added to one litre of lukewarm water, before rinsing with

clean lukewarm water, and drying thoroughly. Alternatively, add a mild

detergent to lukewarm water and then rinse with clean lukewarm water.

When unpacking is complete, we recommend that the appliance should stand

for 2 hours to allow the refrigerant to settle.

Warranty

How to activate your Warranty

This Lec Commercial ECA approved bottle cooler comes with a 2 years Parts and Labour

warranty from the date of purchase.

Registering your product and activating your Lec Commercial warranty couldn’t be

easier. Do not hesitate to call 0844 815 3755, and after choosing the After Sales option,

one of our advisors will be happy to assist you with this.

Alternatively, you can register your product online at www.lec-commercial.co.uk.

Simply click on the ‘Our Warranty’ tab located towards the top of the page and then

choose the ‘Activate Warranty’ option from the drop down menu.

In the unlikely event of breakdown, please us on 0844 815 3755 and choose the After

Sales option for assistance.

Remember: You will need to quote the serial number of this unit. This can be found on

the dataplate on the inside of the door.

Extended Warranty

Also, we now offer customers the opportunity to purchase Extended Warranty for

added piece of mind. Details of this can be found on our website at www.lec-

commercial.co.uk or by calling our After Sales team on 0844 815 3755.

www.lec-commercial.co.uk 5

Positioning your Lec Commercial bottle cooler

When positioning your Lec Commercial Bottle cooler, please ensure you have taken

into account the following factors:

In order to conserve electricity, do not put your appliance near a source of heat,

such as a radiator. Try to avoid locations where the appliance could be exposed

to direct sunlight.

An unheated location such as a cellar is undesirable as it may cause frost build up

and slow defrosting. It may also cause excessive condensation on the outer

surface of your cabinet.

The cabinet should be placed on a hard flat surface for ventilation. The feet must

be adjusted so that the cabinet stands firm and level with a slight tilt from front

to back, to prevent any defrost water dripping from the front.

Ensure that the appliance has sufficient clearance around it to provide adequate

ventilation –10cm at each side, 6cm at the rear and 2.5cm at the top.

The internal temperature of this appliance is affected by location, room

temperature, and frequency of opening the door. The factory settings of the

electronic control (thermostat) are set to allow for these conditions. This

appliance is designed to operate in ambient temperatures between +16°C and

+38°C. Operating outside of these temperature parameters may cause the

appliance to perform out of specification.

www.lec-commercial.co.uk 6

Electrical Connection

The appliance is intended for connection with alternating current. The connection

values for voltage (V) and frequency (Hz) are declared on the name plate in the

cabinets. Power must be connected via a wall socket with a switch. It is strongly

recommended that the wall socket is accessible. The cabinet plug and wall socket should

give correct earthing. If in doubt, please contact your local supplier or an authorised

electrician.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent

or similarly qualified persons in order to avoid a hazard.

If this appliance is fitted with a non-rewirable plug for which your socket is unsuitable

the plug should be cut off and an appropriate plug fitted. The removed plug must be

disposed of as insertion of the plug into an electrical socket is likely to be dangerous.

WARNING: THIS APPLIANCE MUST BE EARTHED

If a non-rewirable plug or a rewirable 13 Amp (BS 1363) plug is used it must be fitted

with a 13 Amp ASTA approved (BS 1362) fuse. If any other plug is used, please contact

our Spares department for details on appropriate fuse type.

The wires in the mains lead are coloured in accordance with the following code:

Note: These colours may not correspond with the coloured markings identifying the

terminals in your plug.

Do not push excess mains lead into the compressor compartment.

If it is necessary to change the fuse in a moulded plug and the fuse cover is detachable, it

must be refitted after the fuse has been changed. If the fuse cover is lost or damaged the

plug must not be used until a replacement is obtained.

It is important that the colour of the replacement fuse cover corresponds with the

coloured insert or as indicated in embossed words on the base of the plug. Replacement

fuse covers are available from our Spares department, at the address on the final page of

this manual.

GREEN AND YELLOW - EARTH

BLUE - NEUTRAL

BROWN - LIVE

www.lec-commercial.co.uk 7

Safety Information

WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in

structure, clear of obstruction.

WARNING: Do not use electrical appliances inside the compartment of the appliance,

unless they are of the type recommended by the manufacturer

Before ANY maintenance activity, carefully take the plug out of the socket by

gripping the plug, DO NOT pull on the plug cord.

DO NOT use double-wire extension cords. If an extension cord is necessary make

sure it is a cord, which possesses a protection safety certificate.

If the main power supply cord is damaged, it should be replaced by a qualified

service engineer.

DO NOT attempt to make any repairs to the appliance yourself. Repairs carried

out by someone without the relevant training are putting their personal safety at

risk and will invalidate your warranty.

DO NOT store explosive substances such as aerosol cans with a flammable

propellant in this appliance.

This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety. Children should be

supervised to ensure that they do not play with the appliance.

IMPORTANT: this appliance can be installed built-in, without air gaps as the appliance

has been designed to gain ventilation from the front. The air ventilation at the bottom of

the cabinet must be unobstructed to allow air to circulate around the cabinet.

This appliance is intended to be used in commercial premises and similar applications

such as:

Staff kitchen areas in shops, offices and other working environments.

Bars, pubs, clubs and cafes.

Social Clubs.

Restaurants and similar.

Retail premises.

www.lec-commercial.co.uk 8

Before you plug your appliance in

IMPORTANT: Ensure that the Lec Commercial bottle cooler is left for 2 hours before

use to allow the refrigerant to settle.

It is essential that you clean the interior of your bottle cooler BEFORE using it for the

first time. The interior should be wiped with a soft cloth dampened with a solution of

one teaspoonful of Bicarbonate of soda to one litre of lukewarm water. Rinse with clean

lukewarm water, and dry thoroughly.

DO NOT use soaps, wire wool, scouring powder or disinfectants of any kind.

Using Appliance for First Time

When unpacking and cleaning are complete plug the mains lead of your appliance into a

suitable earthed socket and switch on.

IMPORTANT: When using the bottle cooler for the first time, it is essential that you

allow it to run for 24 hours before filling to ensure it is working properly.

Note: This appliance has been supplied with a factory pre-set temperature of +3°C.

Important Refrigerant Information

The entire Lec Commercial ECA bottles cooler range contains environmentally-friendly,

non ozone depleting R600a refrigerant.

WARNING: Do not damage the refrigerant circuit

As R600a is a flammable gas, it is essential to avoid damage to the refrigeration

circuit during transportation and installation. If the refrigeration circuit is damaged,

avoid using a naked flame in the vicinity of the refrigerator and connecting power to the

refrigerator. Also make sure there is good ventilation within the room.

www.lec-commercial.co.uk 9

2 - Using Your Appliance

Product Details

Model

Dimensions

W x D x H (mm)

Refrigerant

Type

Temperature

Range

Colour

No. of

Doors

Door

Style

Capacity

(330ml

bottles)

BC6097K

600 x 500 x 900

R600a

+2°C to +10°C

Black

Hinged

106

BC6097ST

600 x 500 x 900

R600a

+2°C to +10°C

Stainless

Steel

Hinged

106

BC9097K

900 x 500 x 900

R600a

+2°C to +10°C

Black

Hinged

180

BC9097ST

900 x 500 x 900

R600a

+2°C to +10°C

Stainless

Steel

Hinged

180

Note: Additional or replacement parts are also available from our Spares

department.

1. Fitted lock(s)

2. Door handle

3. Wire shelves (see page

10)

4. Adjustable front feet (x2)

(see page 10)

5. Interior Light On / Off

switch

6. Electronic controller

with external

temperature display (for

operating information see

pages 11-12)

www.lec-commercial.co.uk 10

Internal Light

Lec Commercial bottle coolers are fitted with internal fluorescent lights that can be

switched on and off using the red switch located at the bottom of the cabinet adjacent to

the controller.

The light should be turned off whenever it is not required, in order to save energy and

keep your running costs down.

Doors

On all ECA approved models, the door is opened by means of a handle screwed onto the

front of the door. All doors are fitted with a self closing mechanism for energy efficiency

and your convenience. Should for any reason, the self closing mechanism fail, to close

the door apply a gentle pressure until the magnetic door gasket seals against the cabinet

face.

Do not "slam close". Check periodically that there are no gaps between the gasket and

the cabinet face as this will cause the bottle cooler to operate less efficiently.

Shelves

The Bottle Cooler is fitted with adjustable shelves that can be moved to

suit your storage needs. The support clips (right) are removed by

pressing them together and tilting them upwards.

On the double door models, you will notice that there are vertical

centre rails positioned at the front and back of the interior. Ensure that

the clips are also positioned on the vertical centre rails to fully secure

shelves in place. Check that all the clips are level and at the correct

height before positioning the shelves.

WARNING: Maximum loading capacity per shelf is 20kg

Adjusting the feet

Your Lec Commercial bottle cooler comes fitted with 2 adjustable

front feet as standard. If placing on an uneven surface, you may need

to adjust the feet. Simply tilt the unit back slightly to adjust the

height.

To extend the height level of the feet, simply twist/unscrew the feet

clockwise until you reach desired level.

To reduce the height level of the feet, twist/screw the feet anti-

clockwise until you reach desired level.

Support clips

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lec+ Kühlschrank Handbücher

Lec+

Lec+ L5010W Bedienungsanleitung

Lec+

Lec+ R50052W Bedienungsanleitung

Lec+

Lec+ TS55142W Bedienungsanleitung

Lec+

Lec+ L1414Z Bedienungsanleitung

Lec+

Lec+ RST6057I Bedienungsanleitung

Lec+

Lec+ TL55142W Bedienungsanleitung

Lec+

Lec+ R5026W Bedienungsanleitung

Lec+

Lec+ TF55185W Bedienungsanleitung

Lec+

Lec+ TS50152W Bedienungsanleitung

Lec+

Lec+ 444443640 Bedienungsanleitung

Lec+

Lec+ L5511W Bedienungsanleitung

Lec+

Lec+ L50262W Bedienungsanleitung

Lec+

Lec+ TF60185WTD W Bedienungsanleitung

Lec+

Lec+ CLGN700ST Bedienungsanleitung

Lec+

Lec+ TL55142W Bedienungsanleitung

Lec+

Lec+ CL 157 Bedienungsanleitung

Lec+

Lec+ TL6015W Bedienungsanleitung

Lec+

Lec+ TNF55187W Bedienungsanleitung

Lec+

Lec+ TU55142W Bedienungsanleitung

Lec+

Lec+ L6014W/S Bedienungsanleitung

Lec+

Lec+ T5576W Bedienungsanleitung

Lec+

Lec+ TL60175W Bedienungsanleitung

Lec+

Lec+ TF50152W Bedienungsanleitung

Lec+

Lec+ R5511W Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung

Teledyne

Teledyne 6712FR and Betriebsanleitung

Matsui

Matsui MTT50W12E Bedienungsanleitung