Lectronics DBu Bedienungsanleitung

Digital Belt Pack Transmitter

DBu, DBu/E01

Quick

Start

Guide

Fill in for your records:

Serial Number:

Purchase Date:

This guide is intended to assist

with initial setup and operation of

your Lectrosonics product.

For a detailed user manual, down-

load the most current

version at:

www.lectrosonics.com

1 September 2022

Digital Hybrid Wireless®US Patent 7,225,135

LECTROSONICS, INC.2

DBu, DBu/E01 Features and Functions

USB Port

Belt clip

mounting hole

Belt clip

mounting hole

Battery

compartment

door

470.100

-40 -20 +0

DBu

Battery

status LED

Key verication

LED

Menu navigation

buttons

Power button

Return to

previous screen

PWR/FUNC

AUDIO

-20 -10

IR PORT

Modulation

Indicators*

Programmable

Function Switch

Audio

Input

Jack

Antenna

Port

IR Port

www.lectrosonics.com 3

DBu, DBu/E01 Features and Functions

Programmable Switch

The transmitter can also be congured as a “one button” device by

locking the ability to make changes with the keypad, and conguring

the top panel switch as either power on/o or a mute function.

Modulation Indicator LEDs

When the transmitter is set to MUTE, the -10 Modulation Indicators

LED will glow solid red. Otherwise, the -10 Modulation Indicators LED

will glow solid green when transmitter is on.

Belt Clips

The wire belt clip may be removed by pulling the ends out of the holes

in the sides of the case. Be sure to have a rm grip to avoid scratching

the surface of the housing.

An optional spring-loaded, hinged belt clip (model number BCSLEBN)

is also available. This clip is attached by removing the plastic hole cap

on the back of the housing and mounting the clip with the supplied

screw.

IR (infrared) Port

The IR port is available on the top of the transmitter for quick setup

using a receiver with this function available. IR Sync will transfer the

settings for frequency from the receiver to the transmitter.

Remove hole cap to

attach spring loaded

belt clip

LECTROSONICS, INC.4

Battery Installation

The transmitter is powered by two AA batteries. We recommend using

alkaline, lithium, or rechargeable batteries for longest life.

The battery status circuitry compensates for the dierence in voltage

drop between alkaline and lithium batteries across their usable life, so

it’s important to select the correct battery type in the menu.

Because rechargeable batteries run down quite abruptly, using the

Power LED to verify battery status will not be reliable. However, it is

possible to track battery status using the battery timer function avail-

able in the receiver.

Push outward on the battery compartment door and lift it to open.

Slide door out to release catch

Lift door to open

Insert the batteries according to the markings on the back of the hous-

ing.

If the batteries are inserted incorrectly, the door will close but the unit

will not operate.

The battery contacts can be cleaned with alcohol and a cotton swab,

or a clean pencil eraser. Be sure not to leave any remnants of the cot-

ton swab or eraser crumbs inside the compartment.

www.lectrosonics.com 5

Contact springs

Battery Status LED Indicator

Alkaline, lithium or rechargeable batteries can be used to power the

transmitter. The type of batteries in use are selectable in a menu on the

LCD.

When alkaline or lithium batteries are being used, the LED labeled BATT

on the keypad glows green when the batteries are good. The color

changes to red when the they are nearing the end of life. When the LED

begins to blink red, there will be only a few minutes remaining.

The Power/Function LED on the top panel will mirror the keypad LED

unless the programmable switch is set to Mute, and the switch is

turned on.

The exact point at which the LEDs turn red will vary with battery brand

and condition, temperature and power consumption. The LEDs are

intended to simply catch your attention, not to be an exact indicator of

remaining time.

A weak battery will sometimes cause the Power LED to glow green im-

mediately after the transmitter is turned on, but it will soon discharge to

the point where it will turn red or the unit will turn o completely.

Rechargeable batteries give little or no warning when they are depleted.

If you wish to use these batteries in the transmitter, the most accurate

way to determine runtime status is by testing the time provided by a

particular battery brand and type, then using the BatTime function to

determine remaining runtime.

NOTE: Refer to the Main Menu and Setup Section of your

manual for BatTime details.

LECTROSONICS, INC.6

Operating Instructions

Powering On in Operating Mode

Press and hold the Power Button for several seconds until a moving

bar on the LCD progresses.

Hold

for

Rf On 470.100

-40 -20 +0

DBu

Powering On in Standby Mode

A brief press of the Power Button , and releasing it before the mov-

ing bar progresses, will turn the unit on with the RF output turned o.

In this Standby Mode the menus can be browsed to make settings and

adjustments without the risk of interfering with other wireless systems

nearby.

Hold

for

Rf On

Release Power

Button before

the moving bar

progresses to

enter standby

mode

470.100

-40 -20 +0

DBu

RF indicator blinks

After settings and adjustments are made, press the power button again

to turn the unit o, or turn on the Transmit function by entering the

main menu, selecting Xmit, then RF On?

Powering O

Powering

O . . .

From any screen, power can be turned o by select-

ing Pwr O in the power menu, holding the Power

Button in and waiting for the moving bar to

progress, or with the programmable switch (if it is

congured for this function).

If the power button is released, or the top panel

switch is turned back on again before the moving bar

progresses, the unit will remain turned on and the LCD will return to the

same screen or menu that was displayed previously.

NOTE: If the programmable switch is in the OFF position, power can

still be turned on with the power button. If the programmable switch is

then turned on, a brief message will appear on the LCD.

When you release the but-

ton, the unit will be opera-

tional with the RF output

turned on and the Main

Window displayed.

www.lectrosonics.com 7

LCD Menu Map

NOTE: The

settings will be

stored when the

BACK button

is pressed.

DBu

Main Menu Tree

Rolloff

Input Gain Gain

Select option with arrow buttons

to select.

Select option with arrow buttons

to select.

Rolloff

70 Hz 1

Phase Phase

Freq.

Xmit Select Freq. in mHz or kHz with arrow buttons

to select.

Freq.

470.100

RF On?

Tx Power

Select option with arrow buttons

to select.

Select level with arrow buttons

Backlit

30 Seconds

5 Seconds

Select option with arrow buttons

to select.

Bat Type

Alk.

Lith.

Select option with arrow buttons

to select.

Setup

LED Off LEDs

About

Select option with arrow buttons

to select.

DBu

V1.22

/2.00

Default Default

settings

Remote Select option with arrow buttons

to select.

Yes

Select option with arrow buttons

to select.

Remote

Enable

Ignore

Off

or to go back.

to get key.

to send key.

IR&Key

Select option with arrow buttons

to select.

Send Freq

Sync --->

Send Freq

Send All Send All

Get Freq Get Freq

Get All Get All

Select option with arrow buttons

to select.

Key Type Key Type

Standard

SYNC

Locked? Yes

Select option with arrow buttons

to select.

Locked?

ProgramSw

TalkBk

Select option with arrow buttons

to select.

ProgSw

|-40 |-20 +0|



Wipe Key

Make Key?

Yes

Select option with arrow buttons

to select. Encrytion

key

ERASED

* This menu item is

only available in

Shared key mode. Send Key

Send Key

Send --->

Select option with arrow buttons

to select. IR

SYNC



RF On?

Yes

TxPower

25 mw

50 mW

Sync --->

AutoOn? No

Yes

Select option with arrow buttons

to select.

AutoOn?

Select option with arrow buttons

to select.

Select option with arrow buttons

to select.

BACK

Normal

Invert

LECTROSONICS, INC.8

Main Menu and Setup Screen

Details

Entering the Main Menu

The LCD and keypad interface makes it easy to browse the menus and

make the selections for the setup you need. When the unit is powered

up in either the operating or the standby mode, press MENU/SEL on

the keypad to enter a menu structure on the LCD. Use the and ar-

row buttons to select the menu item. Then press the MENU/SEL button

to enter the setup screen.

-40 -20 0

Gain

The prompt in the upper right corner may display one or

both arrows, depending upon what adjustment can be

made. If the changes are locked, a small padlock symbol

will appear.

Main Window Indicators

The Main Window displays on/o status, talkback or audio mute status,

standby or operating mode, operating frequency, audio level and

battery status.

470.100

-40 -20 +0

DBu

MUTE

Frequency (MHz)

RF On/Off

Status

Battery status

Audio level

Audio Mute or

Talkback status

If the programmable switch function is set for Mute or Talkback, the

Main Window will indicate that the function is enabled.

www.lectrosonics.com 9

Menu Item Descriptions

Input

Gain

Gain can be set, from -7 to +44, by using the and arrow buttons.

Adjusting the Input Gain

The two bicolor Modulation LEDs on the top panel provide a visual indi-

cation of the audio signal level entering the transmitter. The LEDs will

glow either red or green to indicate modulation levels as shown in the

following table.

Signal Level -20 LED -10 LED

Less than -20 dB O O

-20 dB to -10 dB Green O

-10 dB to +0 dB Green Green

+0 dB to +10 dB Red Green

Greater than +10 dB Red Red

NOTE: Full modulation is achieved at 0 dB, when the “-20” LED

ﬁrst turns red. The limiter can cleanly handle peaks up to 30 dB

above this point.

It is best to go through the following procedure with the transmitter

in the standby mode so that no audio will enter the sound system or

recorder during adjustment.

1) With fresh batteries in the transmitter, power the unit on in the

standby mode (see previous section Powering On in Standby

Mode).

2) Navigate to the Gain setup screen.

-40 -20 0

Gain

3) Prepare the signal source. Position a microphone the way it will

be used in actual operation and have the user speak or sing at

the loudest level that occur during use, or set the output level of

the instrument or audio device to the maximum level that will be

used.

LECTROSONICS, INC.10

4) Use the and arrow buttons to adjust the gain until the –10

dB glows green and the –20 dB LED starts to icker red during

the loudest peaks in the audio.

5) Once the audio gain has been set, the signal can be sent through

the sound system for overall level adjustments, monitor settings,

etc.

6) If the audio output level of the receiver is too high or low, use

only the controls on the receiver to make adjustments. Always

leave the transmitter gain adjustment set according to these

instructions, and do not change it to adjust the audio output level

of the receiver.

Rollo (Low Frequency Roll-o)

The low frequency audio roll-o is adjustable to optimize performance

for ambient noise conditions or personal preference.

Low frequency audio content may be desirable or distracting, so the

point at which the roll-o takes place can be set to 20, 35, 50, 70, 100,

120 or 150 Hz.

Rolloff

70 Hz

Phase (Selecting Audio Polarity)

This setting allows for conguration for use with certain microphones,

or for setting custom parameters.

Phase

Normal

Invert

Xmit

Setting Frequency

Frequency (mHz and kHz) in can be set by using the MENU/SEL button

to choose mHz or kHz and the and arrows to adjust frequency.

Andere Handbücher für DBu

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lectronics Sender Handbücher

Lectronics

Lectronics uh200 Bedienungsanleitung

Lectronics

Lectronics UH400TM Bedienungsanleitung

Lectronics

Lectronics DBu Bedienungsanleitung

Lectronics

Lectronics DCHT Bedienungsanleitung

Lectronics

Lectronics DCHT Bedienungsanleitung

Lectronics

Lectronics Digital Hybrid Wireless HHa-941 Bedienungsanleitung

Lectronics

Lectronics IFBT4-VHF Bedienungsanleitung

Lectronics

Lectronics HM/E01 Bedienungsanleitung

Lectronics

Lectronics SMB/E01Series Bedienungsanleitung

Lectronics

Lectronics IFBT4/E01-VHF Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung