LEGRAND C2G 29977 Bedienungsanleitung

6500 Poe Avenue

Dayton, OH 45414

Phone 800.293.4970

www.c2g.com

Specifications

CPU

Intel Celeron J1800 Processor, @ 2.41GHz 4 cores

Memory

2GB DDR3

Display

Integrated Intel HD Graphics, 1x HDMI and 1x VGA

Keyboard and Mouse

USB keyboard and mouse (not required and not included)

Peripherals

• USB 2.0 ports (3x)

• SS USB 3.0 port (1x)

• Network gigabit interface (2x)

• VGA Video out port (1x)

• HDMI Video out port (1x)

• Audio in via 3.5mm port (1x)

• Audio out via 3.5mm port (1x)

• RS232 port (1x)

Operating System

Ubuntu 18.04 LTS

Temperature/Humidity

Operating: 0 ºC to 50 ºC, Storage: -20 ºC to 80 ºC

Humidity: 10% to 90% (non-condensing)

Dimensions

5.24 x 5.00 x 1.38 inch (133 x 127 x 35 mm)

Weight

1.5lbs (0.7kg)

Accessories Included

External 12VDC @ 2A Power Adaptor

Regulatory

FCC, CE, RoHS, WEEE

Order Information

29977 Network Controller for 4K HDMI over IP

Please download the complete 29977 Network Controller for 4K HDMI over IP product

operation manual from the C2G web site (at www.cablestogo.com).

Network Controller for

4K HDMI® over IP (29977)

Quick Start Guide

Overview

The C2G Network Controller for 4K HDMI over IP (29977) is a Linux-based PC that allows

users to control hub-installed C2G products via an Ethernet Web interface.

When installed on a local area network (LAN), the C2G Network Controller will scan the

LAN for connected C2G products allowing the user to auto-discover, configure and control

these products through an Ethernet Web interface.

Applications

Application is for control of the C2G Audio/Video over IP product line. The Network

Controller can be used to implement a virtual matrix, splitter, video wall and other

configurations over IP.

Installation

1. Connect the Ethernet LAN 1 port of the Network Controller to the Ethernet switch and

then apply power to the unit (the Ethernet LAN 1 port should be connected before

applying power). Turn on the Power Switch. Note that LAN 2 port is configured as a

DHCP client and can be utilized for control purpose.

2. The unit will go through a power-up sequence.

3. With the use of a computer and a browser, connect to the Network Controller web

page.

The default IP address is: 192.168.168.50

The computer will need to be on the same local IP network segment.

If the unit is configured in DHCP mode, then the IP address will be assigned by the

DHCP/network server. Check with an IT administrator for available IP addresses.

4. The next and final step is to setup and configure the Network Controller via the

controller web interface. In order to accomplish this, navigate to the C2G web site (at

www.cablestogo.com) and download the 29977 Network Controller for 4K HDMI over

IP product manual. The manual will provide the necessary instructions to complete

the remaining system setup and configuration.

C2G Warranty

At C2G we want you to be totally confident in your purchase.

That is why we offer a warranty on this device. If you experience

problems due to workmanship or material defect for the duration

of this warranty, we will repair or replace this device.

To request a Return Merchandise Authorization (RMA) number,

contact customer service at C2G.em[email protected].com.

Application Diagram

Troubleshooting

The following table describes some of the symptoms, probable causes and possible solutions

in regard to the installation of the C2G Network Controller.

Also, please download and read the latest 29977 Network Controller for 4K HDMI over IP

product manual from the C2G web site.

Symptom

Probable

Cause

Possible

Solution

No power LED

No power to the unit

Verify that the power supply is connected to the

unit, and that the AC adaptor is connected to

the power source. Also press the Power button

ON.

Unable to connect to

web page

Bad network cable

or wrong IP address

The controller and host computer need to be in

the same local IP network to be able to

communicate. Also try replacing the network

cable with a new one.

Unable to connect to

web page

Unknown IP address

Connect a monitor to the controller and check the

controller IP address displayed on the monitor

for both the LAN 1 and LAN2 ports. The LAN 1

port is the one required for normal operation.

Make sure the LAN 1 port is connected to the

same network as the AV over IP devices.

If IP address is not shown, then make sure the

Ethernet cable is good and properly connected

to the LAN 1 port, and then reboot the unit by

cycling the AC power.

Andere Handbücher für C2G 29977

Andere LEGRAND Controller Handbücher

LEGRAND

LEGRAND 0 648 84L Bedienungsanleitung

LEGRAND

LEGRAND 038 09 Kurzanleitung

LEGRAND

LEGRAND Mosaic Bedienungsanleitung

LEGRAND

LEGRAND DPX-IS 630 Bedienungsanleitung

LEGRAND

LEGRAND 0 784 48 Bedienungsanleitung

LEGRAND

LEGRAND HA7000 Bedienungsanleitung

LEGRAND

LEGRAND 0 766 22 Bedienungsanleitung

LEGRAND

LEGRAND Wattstopper LMPL-101 Bedienungsanleitung

LEGRAND

LEGRAND 5739 04 Bedienungsanleitung

LEGRAND

LEGRAND MRD6 v2 Bedienungsanleitung

LEGRAND

LEGRAND LE00282AC Bedienungsanleitung

LEGRAND

LEGRAND Bticino H4652 Bedienungsanleitung

LEGRAND

LEGRAND FSIR-100 Bedienungsanleitung

LEGRAND

LEGRAND 0 883 27 Bedienungsanleitung

LEGRAND

LEGRAND 5 720 89 Bedienungsanleitung

LEGRAND

LEGRAND 0 663 40 Bedienungsanleitung

LEGRAND

LEGRAND 0 675 97 Bedienungsanleitung

LEGRAND

LEGRAND 0 026 72 Bedienungsanleitung

LEGRAND

LEGRAND Raritan Smart Rack Controller Bedienungsanleitung

LEGRAND

LEGRAND C2G 29977 Bedienungsanleitung

LEGRAND

LEGRAND 488 43 Bedienungsanleitung

LEGRAND

LEGRAND F401 Bedienungsanleitung

LEGRAND

LEGRAND Raritan SRC-0100 Bedienungsanleitung

LEGRAND

LEGRAND 0 663 35 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch