LEGRAND VADDIO EasyIP 30 Bedienungsanleitung

Document Number 411-0055-31 Rev B – June 2022

Installation Guide for the

EasyIP 30 ePTZ AV-over-IP ePTZ Camera

Overview

This guide covers:

EasyIP 30 ePTZ AV-over-IP ePTZ camera, 999-30250-000 (black, worldwide)

EasyIP 30 ePTZ AV-over-IP ePTZ camera, 999-30250-000W (white, worldwide)

You’ll also find some information about other products you might use in your EasyIP system.

EasyIP 30 ePTZ Camera Features

nIdeal for small to medium conference rooms

nPairs with an EasyIP Decoder or EasyIP Mixer; may be paired to two host devices

nIntelliFrameTM intelligent framing algorithm keeps participants in view reliably, without facial

recognition

n30x zoom, horizontal field of view of 70.2°

nUp to 1080p/30 video

nIntegration-ready Telnet control

nFull administrative control via web interface

nPresenter-friendly RF remote control

The EasyIP Ecosystem

Vaddio®EasyIP products are designed to be used together.

nEasyIP cameras deliver video in Vaddio's proprietary EasyIP format. A host device is required to

convert the cameras' output signal to an IP and/or USB stream.

nEasyIP host devices can control EasyIP cameras but not other cameras.

nEasyIP host devices automatically detect EasyIP cameras on the host device's subnet.

nEasyIP products require PoE+ power. Typically the EasyIP system is powered by a PoE+ switch such

as the EasyIP Switch.

A Quick Look at the EasyIP 30 ePTZ Camera

The camera is available in black or white.

Front View

nCamera and zoom lens – Up to 30x zoom.

nStatus lights – Show the camera's current state. Can be turned off in the administrative web

interface.

nPivoting head – Manually tilt the head as needed.

Connector Panel

The connectors are on the underside of the camera.

nPoE+ – RJ-45 connector. Connect to a powered port on the PoE+ switch.

nIP button – Press to display the camera's IP address on video outputs.

Installation Guide for the EasyIP 30 ePTZ AV-over-IP ePTZ Camera

Installation

This section covers:

nTips for selecting camera locations

nCabling notes

nInstalling the camera mount and mounting the camera

nSystem connection diagrams with cameras and audio peripherals

Cameras and network-connected audio peripherals must be paired to the host device after the

installation is complete.

Contact Vaddio Technical Support if you have questions or encounter any problems. Phone

800.572.2011 / +1.763.971.4400, email [email protected].

And a required safety note here:

Note

PoE type networks connected to this equipment are for intra-building use only and should not be

connected to lines that run outside of the building in which this product is located.

Don’t Void Your Warranty!

Caution

EasyIP products are for indoor use. Do not install these products outdoors or in a humid environment

without the appropriate protective enclosure.

Caution

Do not install or operate any EasyIP product if it has been dropped, damaged, or exposed to liquids. If

any of these things happen, return the product to Vaddio for safety and functional testing.

Before You Start

Work with the network administrator to plan your EasyIP deployment. Atypical EasyIP system

includes network equipment that serves DHCP addresses.

Do these things before installing any Vaddio product:

nBe sure you can identify all cables correctly.

nCheck Cat-5 cables for continuity.

nTalk to the network administrator.

oInform the network administrator if you are installing the EasyIP system with a PoE+ switch. The

switch sold as part of the EasyIP ecosystem is configured for DHCP operation. The network

administrator may need to take steps to ensure a trouble-free installation.

oIf you will be responsible for configuring the devices that you install, ask what hostnames (if any)

you should assign to them.

Things to keep in mind when deciding where to install the camera:

nConsider camera viewing angles, lighting conditions, line-of-sight obstructions, and in-wall

obstructions where the camera is to be mounted.

nEnsure that the camera will point away from the ceiling and lights. The camera will not perform well if

it is pointed toward a light source such as a light fixture or window.

Installation Guide for the EasyIP 30 ePTZ AV-over-IP ePTZ Camera

Cabling Notes

Caution

When building cables for Vaddio products, do not use pass-through RJ-45 connectors.

Incorrectly crimped pass-through connectors can damage the connectors on the product,

which will void your warranty.

Intact – will make reliable contact

with cable connector

Damaged – Bent contact fingers

will NOT make reliable contact

with cable connector

Use Cat-5e or better cable. We recommend using high-quality connectors and a high-quality crimping

tool. If connectors are crimped incorrectly, they can cause intermittent connections and degrade signal

quality.

We recommend shielded cabling if the cables will be coiled, run tightly with other cables, or routed near

sources of electromagnetic interference such as power lines or fluorescent light fixtures.

Caution

Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in

equipment damage and will void the warranty.

Pro Tip

Label all cables at both ends.

Connecting EasyIP Products

EasyIP cameras and audio products require an EasyIP host device to decode the AV-over-IP signal and

originate a USB stream.

EasyIP devices can be powered using mid-span PoE+ power injectors (sold separately), or they can be

connected to a PoE+ switch such as the EasyIP Switch, which ensures that the room's EasyIP

installation is on its own subnet. The EasyIP Switch is preconfigured for use with Vaddio EasyIP

products. The connection diagrams in this section each show an EasyIP Switch powering the installation.

Make all connections while the PoE+ switch is turned off.

Caution

The EasyIP Switch serves DHCP addresses. Do not connect the EasyIP Switch to the network without

guidance from an on-site network specialist.

Installation Guide for the EasyIP 30 ePTZ AV-over-IP ePTZ Camera

Basic Connections for Cameras and Audio with EasyIP Decoder

Here is an example of a simple EasyIP deployment.

nEach camera connects to a PoE+ port on the switch. This is the only connection that the cameras

require.

nThe EasyIP Decoder manages up to four EasyIP cameras and provides hard-wired audio

connections for two EasyMic microphones and an analog speaker with amplifier.

nThe EasyIP Decoder connects directly to a computer as a USB conferencing device.

nAny model of EasyIP camera may be used.

nThe microphones may be Vaddio TableMIC or CeilingMIC microphones.

This diagram shows EasyIP 30 ePTZ cameras and TableMIC microphones.

Installation Guide for the EasyIP 30 ePTZ AV-over-IP ePTZ Camera

Basic Connections for Cameras and Audio with EasyIP Mixer

Here is an example of an EasyIP deployment using an EasyIP Mixer.

nEach camera connects to a PoE+ port on the switch. This is the only connection that the cameras

require.

nThe EasyIP Mixer manages up to four EasyIP cameras.

nThe EasyIP Mixer is paired to two network-connected EasyIP CeilingMIC D microphones. It also

provides hard-wired audio connections for two microphones and two amplified analog speakers.

nAny model of EasyIP camera may be used.

nEasyIP CeilingMIC D and EasyIP TableMIC D microphones can pair with the EasyIP Mixer.

nAcomputer connects to the system as a USB conferencing device, and can be connected to the

HDMI input as an HDMI content source.

This diagram shows EasyIP 20 and EasyIP 30 ePTZ cameras with EasyIP CeilingMIC D microphones.

Installation Guide for the EasyIP 30 ePTZ AV-over-IP ePTZ Camera

Installing the Wall Mount

The camera is shipped with a wall mount, which can be inverted.

You can install the camera wall mount to a display mount or directly to drywall. If you mount it to drywall,

use wall anchors. A drop-down ceiling mount adapter is also available.

Installing the Camera

Caution

Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in

equipment damage and will void the warranty.

1. Slide the camera into the mount. It should be a tight fit.

2. Connect all required cables to the camera.

3. Secure the cable cover to the mount.

About Inverted Cameras

If you use an inverted mount, set the camera's Image Flip mode ON for inverted operation. This orients

the video image correctly and sets the tilt motors to respond appropriately to tilt up and down commands

from the remote, web interface, and connected control devices. Refer to the camera’s Complete Manual

Installation Guide for the EasyIP 30 ePTZ AV-over-IP ePTZ Camera

Vaddio is a brand of Legrand AV Inc.· www.legrandav.com · Phone 800.572.2011 / +1.763.971.4400 ·

Fax +1.763.971.4464 · Email [email protected]·

Vaddio is a registered trademark of Legrand AV Inc. All other brand names or marks are used for

identification purposes and are trademarks of their respective owners. All patents are protected under

existing designations. Other patents pending.

Powering Up the EasyIP System

Vaddio recommends making all connections while the EasyIP Switch is turned off. To power the system,

turn on the EasyIP Switch.

nSystems built around an EasyIP Decoder: The device’s status light turns blue when the device is

ready.

nSystems built around an EasyIP Mixer: The power light in the Reset button illuminates immediately

when power is connected. The device's web interface is available after it finishes booting. This takes

about 20 seconds.

nThe EasyIP cameras initialize if they are powered from the same PoE+ switch. This takes a few

seconds. The cameras are ready to accept control information when they finish initializing.

Note

No video is available from the EasyIP system until it is configured and at least one camera is paired to the

host device.

Next Steps

Refer to the Complete Manual for the EasyIP System for information on initial device set-up and pairing

cameras to the host device.

Installation Guide for the EasyIP 30 ePTZ AV-over-IP ePTZ Camera

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LEGRAND Sicherheitskamera Handbücher

LEGRAND

LEGRAND 430 521 Bedienungsanleitung

LEGRAND

LEGRAND 4 305 21 Bedienungsanleitung

LEGRAND

LEGRAND CM7100 Bedienungsanleitung

LEGRAND

LEGRAND 4 306 60 Bedienungsanleitung

LEGRAND

LEGRAND VADDIO EasyIP 30 ePTZ Bedienungsanleitung

LEGRAND

LEGRAND VADDIO IntelliSHOT-M Bedienungsanleitung

LEGRAND

LEGRAND 430 522 Bedienungsanleitung

LEGRAND

LEGRAND 430 521 Bedienungsanleitung

LEGRAND

LEGRAND vaddio RoboFLIP 30 HDBT Bedienungsanleitung

LEGRAND

LEGRAND vaddio RoboSHOT 12E NDI Bedienungsanleitung

LEGRAND

LEGRAND vaddio RoboFLIP 30 HDBT Bedienungsanleitung

LEGRAND

LEGRAND 4 306 41 Bedienungsanleitung

LEGRAND

LEGRAND 430 521 Bedienungsanleitung

LEGRAND

LEGRAND Outdoor Color IR Camera Montageanleitung

LEGRAND

LEGRAND Vaddio ConferenceSHOT 999-21050-001 Bedienungsanleitung

LEGRAND

LEGRAND VADDIO RoboSHOT 30E-M Bedienungsanleitung

LEGRAND

LEGRAND 3 694 00 Bedienungsanleitung

LEGRAND

LEGRAND CM7000 Bedienungsanleitung

LEGRAND

LEGRAND 4 306 32 Bedienungsanleitung

LEGRAND

LEGRAND VADDIO RoboSHOT 30E-M Bedienungsanleitung

LEGRAND

LEGRAND 4 306 52 Bedienungsanleitung

LEGRAND

LEGRAND 4 306 32 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung