LEGRAND The Radiant Collection Bedienungsanleitung

Inhaltsverzeichnis

Andere LEGRAND Schalten Handbücher

LEGRAND

LEGRAND Arteor Bedienungsanleitung

LEGRAND

LEGRAND Raritan Secure Switch Series Bedienungsanleitung

LEGRAND

LEGRAND Wattstopper EOSW Series Bedienungsanleitung

LEGRAND

LEGRAND radiant Bedienungsanleitung

LEGRAND

LEGRAND ZLGP12 Bedienungsanleitung

LEGRAND

LEGRAND radiant WWRL10WHCCV2 Bedienungsanleitung

LEGRAND

LEGRAND Whad 5-6 kVA Bedienungsanleitung

LEGRAND

LEGRAND Qmotion QIS Installationshandbuch

LEGRAND

LEGRAND DA2400 Bedienungsanleitung

LEGRAND

LEGRAND 5 742 02 Bedienungsanleitung

LEGRAND

LEGRAND Pass & Seymour WattStopper DRCL453P Bedienungsanleitung

LEGRAND

LEGRAND Wattstopper LMSW-210 Bedienungsanleitung

LEGRAND

LEGRAND Plexo 0 698 74L Bedienungsanleitung

LEGRAND

LEGRAND Pro 21 7756 21 Bedienungsanleitung

LEGRAND

LEGRAND Niloe LE-764507 Bedienungsanleitung

LEGRAND

LEGRAND adorne ASPD1531 Bedienungsanleitung

LEGRAND

LEGRAND Galion K8/31D20AN-HK Bedienungsanleitung

LEGRAND

LEGRAND Wattstopper AS-100-I Bedienungsanleitung

LEGRAND

LEGRAND 4 130 10 Bedienungsanleitung

LEGRAND

LEGRAND 882 09 Bedienungsanleitung

LEGRAND

LEGRAND 0 672 33 Bedienungsanleitung

LEGRAND

LEGRAND 4 130 09 Bedienungsanleitung

LEGRAND

LEGRAND Galion 2 824 26 Bedienungsanleitung

LEGRAND

LEGRAND Plexo 0 695 20L Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

installation guide

Wi-Fi Smart Switch

2

table of contents

before you start..................................3

what you need ...................................4

installation and setup ................ 6–19

getting to know your switch ......20-21

specifications...................................22

faqs ..............................................23

regulatory information......... 24–27

warranty.......................................28

support ........................................29

3

before you start

Review this guide in its entirety before beginning device installation. Consult an

electrician with any questions or if you are unsure of your abilities.

DWarning: Incorrect installation could

result in death, serious injury, and/or

damage to your home or devices.

DCaution: To reduce the risk of injury

and/or overheating and damage to other

equipment:

• For dry, indoor use only.

• Do not use to power medical equipment.

• Not suitable as a disconnecting means.

• Do not use with loads exceeding the

device load rating (see page 22).

• Connect the smart switch to a

120 VAC, 60 Hz power source ONLY.

• Always use copper wire to install the

smart switch and follow all applicable

local and national electrical codes.

• Install in a non-metallic electrical box

to protect wireless signal strength.

Visit the Legrand website at www.legrand.us/radiant/smart-lighting/support for

installation videos or to learn more about your smart device.

4

what you need

REQUIRED:

Phillips-head screwdriver

Flat blade screwdriver

YOU MAY ALSO NEED:

Voltage tester, pliers, wire cutter, wire stripper, electrical tape, ﬂashlight, wiring

leads (included), and wire nuts (included)

5

6

installation & setup

step one

|

turn off the power for your device at the

circuit breaker

Flip the existing light switch multiple times to conﬁrm the power is off.

NOTE: If there are multiple devices next to your existing light switch, make sure

power is off at the circuit breaker for all of those devices.

7

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

8

installation & setup

step two

|

remove the existing device

Check for the following wires:

1HOT or LINE: Receives power from the circuit box. Referred to as “hot” for the

purposes of this guide. Do not touch or let “hot” wires contact other wires.

2LOAD: Directs power to your light(s).

3NEUTRAL: Creates a path to return current to the power source when the

device is off. Required for your switch installation.

4GROUND: Provides a safe path for electricity in the event of a short circuit.

5TRAVELER: If more than one switch controls the light, an additional wire will be in

the box that “travels” to the other switch.

NOTE: Refer to the “faqs” on page 23 if you are unsure of your wiring.

9

OFF

ON

OFF

ON

OFF

ON

VOLTAGE

TESTER

Load

Supply

“Hot”

10

installation & setup

step three

|

wire the smart switch

Use the wire nuts provided to secure the wires together.

1Connect the WHITE neutral wire on the switch to the neutral wires in the box, using

the red wire nut.

2Connect the LOAD wire on the switch to the load wire in the box.

3Connect the HOT wire on the switch to the hot wire(s) in the box.

4Connect the GREEN ground wire on the switch to the ground wire(s) in the box.

5If the light is controlled with only one switch, use a wire nut to cap the YELLOW

traveler wire on the device. If more than one switch controls the light, connect the

YELLOW traveler wire on the device to the wire going to the other switch.

NOTE: This product will work with existing three-way switches. The switch can be installed

in either location.