Leica Geosystems TM6100A Bedienungsanleitung

Leica TM6100A

User Manual

Version 1.0

English

±¾ÎÄÓÉÌìÀÖ²â»æÍø£¨www.tleer.cn£©ÕûÀíÌá¹©

2TM6100A

Introduction

Purchase Congratulations on the purchase of a TM6100A instrument.

This manual contains important safety directions as well as instructions for setting

up the product and operating it. Refer to "6 Safety Directions" for further informa-

tion.

Read carefully through the User Manual before you switch on the product.

Product

identification

The type and the serial number of your product are indicated on the type plate.

Enter the type and serial number in your manual and always refer to this information

when you need to contact your agency or Leica Geosystems authorized service work-

shop.

Type: _______________

Serial No.: _______________

Introduction TM6100A 3

Symbols The symbols used in this manual have the following meanings:

Type Description

Danger Indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

Warning Indicates a potentially hazardous situation or an unintended use

which, if not avoided, could result in death or serious injury.

Caution Indicates a potentially hazardous situation or an unintended use

which, if not avoided, may result in minor or moderate injury

and/or appreciable material, financial and environmental

damage.

Important paragraphs which must be adhered to in practice as

they enable the product to be used in a technically correct and

efficient manner.

Trademarks • CompactFlash and CF are trademarks of SanDisk Corporation

• Bluetooth is a registered trademark of Bluetooth SIG, Inc

All other trademarks are the property of their respective owners.

Validity of this

manual Description

General This manual applies to all TM6100A instruments.

4TM6100A

Introduction

Available

documentation Name Description and Format

User Manual All instructions required in order to operate the product

to a basic level are contained in the User Manual.

Provides an overview of the product together with

technical data and safety directions.

 

Name Description and Format

System

Field Manual

Describes the general working of the product in

standard use and specific onboard application

programs. Intended as a quick reference field guide.

 

Technical

Reference

Manual

Overall comprehensive guide to the product and

program functions. Included are detailed descriptions

of special software/hardware settings and soft-

ware/hardware functions intended for technical

specialists.



Refer to the following resources for all TM6100A documentation and soft-

ware

• the TPS6000 Product CD

• http://metrology.leica-geosystems.com/en/Downloads_6843.htm

Table of Contents TM6100A 5

Table of Contents

In this manual Chapter Page

1 Description of the System 8

1.1 System Components 8

1.2 System Concept 11

1.2.1 Software Concept 11

1.2.2 Data Storage and Data Conversion Concept 13

1.2.3 Power Concept 15

1.3 Container Contents 16

1.4 Instrument Components 17

2 User Interface 20

2.1 Keyboard 20

2.2 Hot Key Assignments 24

2.3 Screen 27

2.4 Operating Principles 29

2.5 Icons 35

3 Operation 37

3.1 Instrument Setup 37

3.2 Battery 40

3.2.1 Operating Principles 40

6TM6100A

Table of Contents

3.2.2 Instrument Battery 41

3.3 Working with the CompactFlash Card 43

3.4 Accessing Survey Application Program 46

3.5 Built-in autocollimation device 49

3.6 Connection to Application Computer 51

3.7 Limitation of the horizontal and vertical movements 55

4 Check & Adjust 60

4.1 Overview 60

4.2 Preparation 63

4.3 Combined Adjustment (l, t, i and c) 65

4.4 Tilting Axis Adjustment (a) 69

4.5 Adjusting the Circular Level of the Instrument and Tribrach 74

4.6 Adjusting the Circular Level of the Prism Pole 76

4.7 Inspecting the Laser Plummet of the Instrument 77

4.8 Servicing the Tripod 79

4.9 Adjustment of the autocollimation reticule 80

5 Care and Transport 82

5.1 Transport 82

5.2 Storage 84

5.3 Cleaning and Drying 85

5.4 Maintenance 87

Table of Contents TM6100A 7

6 Safety Directions 88

6.1 General Introduction 88

6.2 Intended Use 89

6.3 Limits of Use 91

6.4 Responsibilities 92

6.5 Hazards of Use 93

6.6 Laser Classification 99

6.6.1 General 99

6.6.2 Laser Plummet 101

6.7 Electromagnetic Compatibility EMC 104

6.8 FCC Statement, Applicable in U.S. 107

7 Technical Data 110

7.1 Angle Measurement 110

7.2 Conformity to National Regulations 111

7.2.1 Communication side cover with Bluetooth 111

7.3 General Technical Data of the Instrument 112

8 International Limited Warranty,

Software License Agreement 119

1 - 8TM6100A

Description of the System

1 Description of the System

1.1 System Components

Main components

TM6100A_001

TM6100A

Component Description

TM6100A • an instrument of highest accuracy for measuring, calculating

and capturing data.

• connected with LGO Tools to view, exchange and manage data.

Application

Software

Third party metrology software with an interface to the TM6100A

for acquisition, analysis, management and reporting of data.

LGO Tools An office software consisting of a suite of standard and extended

programs for the viewing, exchange and management of data.

Description of the System TM6100A 1 - 9

Terminology The following terms and abbreviations may be found in this manual:

Term Description

TPS Total Station Positioning System

LGO Tools LEICA Geo Office Tools

Motorised TM6100A instruments are fitted with internal motors, enabling

automatic horizontal and vertical turning are referred to as

Motorised.

Communication

side cover

Communication side cover with integrated Bluetooth is a compo-

nent with external devices, i.e. laptop with application software.

1 - 10TM6100A

Description of the System

Instrument models Model Description

TM6100A Electronic theodolite, motorised, 0.5" accuracy.

LEICA Geo Office

Tools

• LGO Tools supports TM6100A instruments. It also supports all other Leica TPS

instruments.

•LGO Tools is based on a graphical user interface with standard Windows® oper-

ating procedures.

• LGO Tools provides the following functionality:

Functionality Description

Standard

Functionality

Includes data exchange between computer and instrument, data

management including viewing and editing, reporting, creation

and management of codelists, creation and use of format files for

data conversion, uploading and deleting of system software and

application programs.

• Supported operating systems: Windows® XP, Windows® 2000.

• Refer to the online help of LGO Tools for additional information.

Inhaltsverzeichnis

Andere Leica Geosystems Laser-Nivelliergerät Handbücher

Leica Geosystems

Leica Geosystems SPRINTER 100 Bedienungsanleitung

Leica Geosystems

Leica Geosystems NA2 Bedienungsanleitung

Leica Geosystems

Leica Geosystems Jogger 20 Bedienungsanleitung

Leica Geosystems

Leica Geosystems Sprinter 150 Bedienungsanleitung

Leica Geosystems

Leica Geosystems Rugby 810 Bedienungsanleitung

Leica Geosystems

Leica Geosystems Rugby 670 Bedienungsanleitung

Leica Geosystems

Leica Geosystems Runner 20 Bedienungsanleitung

Leica Geosystems

Leica Geosystems LINO L6R Bedienungsanleitung

Leica Geosystems

Leica Geosystems LS10 Bedienungsanleitung

Leica Geosystems

Leica Geosystems Rugby 610 Bedienungsanleitung

Leica Geosystems

Leica Geosystems LINO L6G Bedienungsanleitung

Beliebte Laser-Nivelliergerät Handbücher anderer Marken

Nedo

Nedo ET-5 Bedienungsanleitung

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Bedienungsanleitung

LaserLiner

LaserLiner X2-Laser Bedienungsanleitung

Spectra

Spectra LL300N Bedienungsanleitung

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Bedienungsanleitung

Nedo

Nedo Crossliner 4 Bedienungsanleitung

Lasertec

Lasertec FX360G Bedienungsanleitung

Flex

Flex ALC 8 Bedienungsanleitung

Black & Decker

Black & Decker LZR5 Bedienungsanleitung

Johnson

Johnson 40-6692 Bedienungsanleitung

Cocraft

Cocraft HL 20-SG Bedienungsanleitung

Zircon

Zircon iLine Bedienungsanleitung

HWH

HWH 310 SERIES Bedienungsanleitung

Leica

Leica iCON robot 60 Bedienungsanleitung

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Bedienungsanleitung

LaserLiner

LaserLiner ActiveFinder XP Bedienungsanleitung

DeWalt

DeWalt DW082 Bedienungsanleitung

imex

imex EL20 Bedienungsanleitung