Lelit Pro Line MaraX Bedienungsanleitung
English
EN
User manual
PL62X
MaraX
Pro Line
PRO Line - MaraX - PL62X
2
THANK YOU FOR CHOOSING
A LELIT PRO LINE PRODUCT
Register your product on
care.lelit.com
Download the complete guide to get the most of
your coffee machine PL62X and visit our Lelit Espresso
YouTube channel for insights, tutorials, tips and tricks.
Save the box and all
the packing material!
LELIT has studied the external and internal pack-
ing of your coffee machine to help you re-use it in
case of maintenance or repair need.
Lelit Espresso - English
3
EN
Index
1. Daily cleaning 4
2. Weekly cleaning 4
3. Annual cleaning 5
4. Product overview 7
5. Factory settings 7
6. Equipment box 8
7. Packing 9
8. First start-up 9
9. How to install the water resin lter 10
10. Espresso and coffee 11
11. Steam and hot water 12
12. Stand-by mode 12
13. Limestone prevention 13
14. Lights and states of the machine 14
15. Warranty terms 15
ATTENTION:
Read the safety notes carefully before using this
product.
PRO Line - MaraX - PL62X
4
1. Daily cleaning
1.1 1.2 1.3
Note. For an optimal result we suggest you use our kit PLA9101 (not included) that
contains a microber cloth with embroidered LELIT logo, a paintbrush with bristles in nat-
ural bres and a brush with nylon bristles.
General cleaning. Use a soft cloth, preferably in microber, and moisten it with
tap water to clean the stainless-steel appliance body of the machine (Pic 1.1).
Group cleaning. After each extraction empty the coffee lter, wash the portal-
ter (G) and the relative lter with tap water and use the brush (I) to eliminate the
coffee residues from the group gasket (Pic 1.2).
Steam wand cleaning. After frothing the milk, clean the nozzle of the steam
wand (7) using a soft cloth and dispense a small quantity of steam to eliminate
every possible milk rest in the holes (Pic 1.3).
2. Weekly cleaning
Note. In the equipment box you’ll nd the detergents (F) for the rst cleaning cycle
of the machine. Aerwards, we suggest you use our accessories PLA9201 and PLA9203
(not included).
Filters and portalter cleaning. It’s necessary to clean the portalter to elim-
inate the coffee oils that affect the taste of your drinks negatively. Place a jug
under the hot water wand (15), turn the knob (12) anti-clockwise and take out
about 1 l of water.
Insert the portalter (G) and the used lters into the jug but pay attention not to
immerse the portalter handle (Pic. 2.1). Add 2 bags of detergent powder (F or
PLA9201). After 15 minutes, empty the jug and rinse the portalter (G) and the
lters with plenty of tap water.
Lelit Espresso - English
5
EN
2.1 2.2 2.3
10x10”
min
15
Backushing. Insert the blind lter (C) into the portalter and pour 1 bag of
detergent powder (F or PLA9201) into the lter. Insert the portalter (G) in the
group (13) and lift the lever (14) for 10 seconds. Stop the function and wait for
10 seconds. Repeat the procedure 10 times (Pic 2.2).
Remove the portalter (G) from the group and rinse it with hot water from the
brewing group (Pic 2.3).
Re-insert the portalter (G) in the group and repeat the previous operation 5
times for 10 seconds each time, without detergent powder.
Remove the portalter (G) and take out the blind lter (C). Empty the drainage tray
(17) and rinse the portalter (G), the lters and the tray (17) with plenty of tap water.
2.4
10x5”
Steam wand cleaning. Fill a jug with 500 ml of
cold water, add the content of 1 bottle of detergent
liquid (F or PLA9203) and immerse the steam wand
(7) in this solution.
Open the knob (3) and dispense steam for 5 sec-
onds. Stop the function and wait for 5 seconds. Re-
peat the operation 10 times (Pic 2.4).
Repeat the entire procedure using 1 l of fresh water
to rinse the steam wand (7) properly.
3. Annual cleaning
The descaling of the hydraulic circuit of the machine must be done every year to
ensure longevity and constant performances. This operation must be done by a
specialized technician. You can see the centres authorized to run this procedure
on our website: care.lelit.com.
PRO Line - MaraX - PL62X
6
1 11 17
in the equipment
box
Pic 4
1
12
10
15
2
6
8
9
3
4
5
14
13
16
7
17
11
Lelit Espresso - English
7
EN
4. Product overview
5. Factory settings
1. Mobile water tank cover
2. Heated surface for cup grate
3. Steam dispensing knob
4. Pilot light machine ready
5. Pilot light water tank full of water
6. Manometer for steam and pump
pressure during extraction
7. Multi-directional, anti-burn steam
wand
8. ON/OFF main switch (with lighted
frame)
9. Temperature mode switch
10. Water tank (2,6L)
11. Grate for heated surface
12. Hot water dispensing knob
13. Brewing group
14. Coffee group lever
15. Multi-directional, anti-burn hot
water wand
16. Use mode switch
17. Removable water drainage tray,
complete with grate
Use mode (16)
ModeX (pre-set value)
Temperature mode (9)
Warm (pre-set value)
Stand by:
ON
Resin lter:
Not inserted
To use the machine with different settings, download the complete guide. The
complete guide contains the instructions on how to set other functioning pro-
les.
PRO Line - MaraX - PL62X
8
6. Equipment box
A. 1 dose (9-11g) coffee lter
B. 2 doses PLUS (18-21g) coffee lter
C. Blind lter for backushing
D. Tamper in stainless steel with red
wood handle (PLA481R)
E. Raiser for espresso cups
F. First cleaning kit (with 3 detergent
powder single-dose bags and 1 sin-
gle-dose bottle)
G. Filterholder complete with 2 doses
(14-18g) coffee lter
H. LELIT 35L water resin lter
I. Brush for group head cleaning
J. Plastic spoon for coffee powder
K. Power cord
h
i
k
a
b
cf
ej
g
d
Lelit Espresso - English
9
EN
7. Packing
The packaging of your coffee machine has been studied and produced to be
re-used. Use the original box and all the packaging elements in case you need
to send the machine back to your reseller or to an authorized service centre,
for ordinary or extraordinary maintenance. The complete guide contains the
instructions to help you pack the machine easily.
8. First start-up
8.1 8.2 8.3
FRONT
30
sec
Attention. Remove the machine from its packing and follow the instructions printed
on the box.
Place the machine on a solid, at and dry surface and make sure the appliance is
stable; if needed, screw/unscrew the feet to adjust the position of the machine.
From the equipment box, take out the water drainage tray (17), the grate (11),
the mobile cover (1) and position them as indicated in Pic. 4.
Fill the water tank (10) with room temperature water up to the indicated maxi-
mum level and insert it in its seating (Pic 8.1).
Use the power cord (K) to connect the machine to the electrical mains and turn
ON the machine by pressing the ON/OFF (8) switch. If the water tank (10) is full
of water and properly inserted in its seating, the pilot light (5) goes ON (Pic 8.2).
The hydraulic circuit will need maximum 4 minutes from the 1st turn on to get
lled with water. Once the waiting time is over, the pilot light (4) will start ash-
ing. Lift the group lever (14) completely. The brewing group (13) will start dis-
PRO Line - MaraX - PL62X
10
pensing water (within 30 seconds). Let the water come out for about 30 seconds
and then return the group lever to its initial position (Pic 8.3).
Now the hydraulic circuit is lled up. The machine will start heating the water to
reach the pre-set values. This operation requires maximum 24 minutes: the pilot
light (5) remains rmly on, while the pilot light (4) ashes.
The machine is ready for use when the 2 pilot lights (4 & 5) and the lighted
frame of the ON/OFF (8) switch are rmly on.
Attention. During the heating phase, a small quantity of water will drain in the
tray (17). is is normal and conrms the machine correct functioning (functions check).
9. How to install the water resin lter
9.1 9.2 9.3
1
2
min
3
Before installing the resin lter (H) in the water tank (10), immerse the resin lter
in a jug full of water for about 3 minutes, to eliminate the air inside the lter that
may cause a machine malfunction (Pic 9.1).
Take out the water tank (10) and remove the black rubber support placed on
the bottom of the tank. Insert the resin lter (H) in the bigger hole of the rubber
support, remove the charge tube from the small plastic lter and x it on the
nozzle of the resin lter (H) (Pic 9.2).
Re-place the support in its seating on the bottom of the tank (Pic 9.3), ll the
tank (10) with water and insert the tank (10) in its seating.
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere Lelit Kaffeemaschine Handbücher
Lelit
Lelit PL042EM Bedienungsanleitung
Lelit
Lelit PL41PLUST Bedienungsanleitung
Lelit
Lelit PL60T Bedienungsanleitung
Lelit
Lelit PL41PLUS Bedienungsanleitung
Lelit
Lelit Pro Line - Mara PL62S Bedienungsanleitung
Lelit
Lelit PL042EMI Bedienungsanleitung
Lelit
Lelit Pro Line - Mara PL62S Bedienungsanleitung
Lelit
Lelit Pro Line - Mara PL62 Bedienungsanleitung
Lelit
Lelit PL2SVX-EU Bedienungsanleitung
Lelit
Lelit Vip Line Elizabeth-PL92T Bedienungsanleitung
Lelit
Lelit PL042E Bedienungsanleitung
Lelit
Lelit Grace PL81T Bedienungsanleitung
Lelit
Lelit Pro Line - Mara PL62S Bedienungsanleitung
Lelit
Lelit PRO Line MaraX PL62X Bedienungsanleitung
Lelit
Lelit PL92T Service-Handbuch
Lelit
Lelit PL61 Bedienungsanleitung
Lelit
Lelit PL042TEMD Bedienungsanleitung
Lelit
Lelit Victoria PL91T Bedienungsanleitung
Lelit
Lelit PRO Line MaraX PL62X Service-Handbuch
Lelit
Lelit PL41TEM Bedienungsanleitung
