Lenovo ThinkServer RD210 Bedienungsanleitung

Installation Instructions for manual installation of

Microsoft Windows Server 2003 and 2008

First Edition

Updated: 05 October 2009

NOTE: Before using this information and the product it supports, read the general

information in Section 5.0 Notices in this document.

Follow the installation instructions provided in this document in sequential order unless

these instructions advise you otherwise. Windows and messages might differ from those

in this document.

1.0 What you will need

You must have the following software and hardware for the installation:

•A licensed copy of Microsoft® Windows Server® 2003 or Microsoft® Windows

Server® 2008

•USB diskette drive and the RAID device driver diskette (Windows 2003 only).

(To create this diskette, see 3.1 Creating a RAID device driver diskette.)

•A USB media device containing a RAID device driver might be required

(Windows Server 2008 only).

•Depending on your server, an external DVD reader device might be required.

•Supported hard disk drives. Go to http://www.lenovo.com/thinkserver/ for the

Lenovo® ThinkServer® Proven list of supported options and part numbers for the

server. You will need to set up the logical drive array before installing the

operating system.

For more information, see the documentation that comes with your server.

2.0 Where to download device drivers and files

You can download the device drivers from the Device Drivers matrix on the Lenovo

Support Web site: http://www.lenovo.com/support

3.0 Installation instructions for Microsoft Windows

Server 2003 and 2008

For Windows 2003 only, you must first download the RAID device driver onto a

diskette.

3.1 Creating a RAID device driver diskette (Windows Server 2003 only)

To create the RAID device driver diskette, complete the following steps:

1. From an Internet-connected system with a diskette drive, go to:

http://www.lenovo.com/support .

2. To locate the RAID drivers for your server, navigate to the appropriate server.

3. Download the Windows 2003 RAID diskette (.zip file).

4. Unzip/Extract the files onto a 3.5-inch diskette.

3.2 Creating a logical array (Windows Server 2003 and 2008)

To create a logical array, complete the following steps:

Note: The following steps might vary slightly for different RAID adapters.

1. Switch on the server.

2. When prompted, press Cto launch the Configuration Utility.

3. Press Yto Continue Loading.

4. Select the appropriate adapter and click Start.

5. Select Configuration Wizard in the left frame.

6. Select New Configuration. Note: Any existing or prior configurations will be

cleared and all data will be lost.

7. Select Next.

8. Click Yes when asked if you desire to perform the action.

9. Select Configuration as well as the Redundancy if applicable. Click Next.

10. Click Accept to approve the configuration and click Yes to save the

configuration.

11. Click Yes to Initialize

12. Select the drive that is desired for the boot drive.

13. Select the radio button for the selected boot drive. Click Go.

14. Verify current="selected boot drive". Click Back

15. Click Exit in the left frame. Click Yes to exit the application.

16. Reboot the system.

3.3 Installing Windows Server 2003

To install Windows Server 2003, complete the following steps:

1. Ensure that the server is turned off.

2. Connect a USB diskette drive to the server.

3. Turn on the server and insert the Windows Server 2003 Setup CD into the CD

drive. If you are prompted with the message "Press any key to boot from cd",

press any key.

4. When you are prompted to Press F6 if you need to install a third party SCSI or

RAID driver, press F6. Windows Server 2003 Setup copies the files from the

setup CD. This process takes a few minutes.

5. When you are prompted to manually specify a controller, select S to specify

additional devices.

6. When you are prompted for the manufacture-supplied hardware support diskette,

insert the RAID driver diskette that you created earlier and press Enter.

7. When the device driver name is displayed, select the applicable driver and press

Enter.

8. After the files are copied from the diskette, press Enter. Files are copied from the

setup CD. This process takes several minutes.

9. When you are prompted to install Windows Server 2003, press Enter.

10. When the license agreement is displayed, read the license agreement, and press

F8 to agree.

11. When Windows Server 2003 Setup displays all hard disk storage that is available

on the server, select one of the following options to choose or create a drive

partition in which to install Windows Server 2003:

oAllow Setup to create a partition: To partition the entire hard disk as one

primary partition, highlight Unpartitioned space for the hard disk drive

on which you want to install Windows Server 2003 and press Enter.

oCreate a partition: To create a partition, highlight Unpartitioned space for

the hard disk drive on which you want to install Windows Server 2003 and

press C. You are prompted to indicate how much available space to

allocate from the unpartitioned drive. Type the amount of space (in MB)

and press Enter.

oDelete a partition.

12. When you are prompted to select a file system, select NTFS file system.

Notes:

oSetup formats the selected partition and copies the applicable files to the

drive partition. This process takes several minutes.

oThe server restarts to the graphical portion of Setup where Setup continues

with the installation of Windows Server 2003. During this process, Setup

automatically installs and configures devices in the server. This process

takes several minutes.

13. Change the regional settings if you are not installing the server in the U.S. Click

Next.

Note: To modify the regional settings after installing Windows Server 2003, click

Control Panel and click Regional Options.

14. In the Personalize Your Software window, when you are prompted for your name

and organization, type your name in the Name field and type your organization in

the Organization field. The names that you type are used as default server names.

Applications that you install later use this information for the product registration

and document identification. Click Next.

15. When you are prompted for the Windows Server 2003 Setup CD-Key, type the

Windows Server 2003 Setup CD-Key in the applicable fields. Click Next. (Setup

uses the organization name that was entered previously, as a suggested name for

the server.)

16. In the Licensing Modes window, select the applicable licensing mode for your

organization. Click Next.

17. In the Name and Administrator Password window, when you are prompted for an

administrator password and server name, type the server name and password.

Click Next. (Setup uses the organization name that was entered previously as a

suggested name for the server.)

Note: Passwords are case sensitive. Be sure to use a combination of uppercase

and lowercase letters with at least one number for your password.

18. In the Time Zone window, set the current time. To change the date, click the

button to the right of the date. To change the time, highlight the value that you

want to change and enter the new values using the keyboard or the Up Arrow and

Down Arrow keys. Click Next.

Note: Windows Server 2003 services perform many tasks that are dependent on

the accuracy of the time and date settings of the server. Be sure to select the

correct time zone for the server location to avoid problems.

The remaining operating-system components are installed and configured

according to the options that you specified. The display in the left column shows

the amount of time remaining until the Windows Server 2003 installation is

completed. This process might take several minutes.

When Windows Server 2003 Setup has completed installation, the server

automatically restarts.

19. After Windows Server 2003 starts, press Ctrl+Alt+Delete to log on.

20. When the desktop is displayed, the Windows Server Post-Setup Security Updates

wizard begins. If this server is connected to the Internet, this wizard helps you

download software security updates and configure the system to retrieve updates

automatically.

21. After closing the Security Updates wizard, the Manage Your Server wizard

launches automatically. This wizard helps you to add and configure additional

roles for the server, such as File Server, DHCP Server, Active Directory, and

DNS. For more information, click Read about server roles in the wizard.

Note: You can skip this step and launch the wizard later by clicking Start,

Settings, Control Panel, Administrative Tools, Configure Your Server

Wizard.

3.4 Installing Windows Server 2008

To install Microsoft Windows Server 2008, complete the following steps:

1. Connect the server to a network as required.

2. Depending on your server, you might need to attach an external DVD reader

device.

3. Turn on the server and insert the Windows Server 2008 Setup DVD into the DVD

drive.

4. When you are prompted with the message "press any key to boot from cd or dvd",

press any key. Windows Server 2008 Setup copies the files from the Setup DVD.

Windows load the files (this process takes several minutes).

5. In the Windows Server 2008 window, select the following:

a. For Language to install, select English.

b. For Time and currency format, select English (United States).

c. For Keyboard or input method, select US.

6. Click Next.

7. Click Install Now.

8. Type your product key.

a. Check the Automatically activate Windows when I'm online check box

and click Next.

b. Scroll down and read the license agreement.

c. Click I accept the license terms and click Next.

9. Select Custom (advanced).

10. You might be prompted to install a RAID controller (driver). If prompted, connect

the USB media device containing the RAID device driver.

11. When Windows Server 2008 Setup displays all hard disk storage that is available

on the server, select one of the following options to choose or create a drive

partition in which to install Windows Server 2008:

oAllow Setup to create a partition: To partition the entire hard disk as one

primary partition, highlight Disk0 unallocated space for the hard disk

drive on which you want to install Windows Server 2008 and press Next.

oCreate a partition: To create a partition, highlight Disk0 unallocated

space for the hard disk drive on which you want to install Windows

Server 2008, click Drive options (advanced); then, click New. You are

prompted to indicate how much available space to allocate from the

nonpartitioned drive. Type the amount of space (in MB), click Apply;

then, click Next.

oDelete a partition.

12. Setup formats the selected partition and copies the applicable files to the drive

partition. This process takes several minutes.

When Windows Server 2008 Setup has completed installation, the server

automatically restarts.

13. After Windows Server 2008 restarts, you will be prompted to change the

administrator password before you can log on.

14. After you are logged on as the Administrator, a configuration wizard window is

displayed. Use the wizard for naming and basic networking setup.

15. Next, use the Microsoft Server 2008 Roles and Features functions to setup the

server to your specific needs.

4.0 Post installation instructions: Installing and

updating device drivers

To install the device drivers and to identify hardware that is not functioning, open Device

Manager. In Device Manager, non-functioning devices are usually listed under Other

Devices and are indicated by a yellow exclamation point. To open Device Manager,

complete the following steps:

1. Click Start.

2. Right-click My Computer.

3. Click Manage and select Device Manager in the left pane.

The following section includes instructions for installing device drivers.

4.1 Installing a device driver

To install a device driver, complete the following steps:

1. Go to: http://www.lenovo.com/support .

2. To locate the device drivers for your server, navigate to the appropriate server and

select the desired device driver.

3. Type c:\drivers\<directory name> for the folder where the files are to

be saved. Click Finish.

4. Click Yes to create the folder.

5. When the message "The package has been delivered successfully" is displayed,

click OK.

6. Navigate to c:\drivers\<directory name>, and launch the executable

that was downloaded.

7. In the Welcome window, click Next.

8. In the License Agreement window, read the agreement, then select I accept the

terms in the license agreement, and click Next to continue.

9. Choose the path where you want the installation files to be copied, click Next.

10. Click Install to begin the installation.

11. When prompted to finish the installation, make sure to check the box associated

with finishing the installation. Click Finish.

To configure the network, click: Start -> Control Panel -> Network Connections, and

select New Connection Wizard to set up the network connection.

To configure network protocols, right-click Local Area Connection in the Network

connections window, and click Properties.

To join a domain, click Start, Control Panel, System, click the Computer Name tab,

and then click Change.

5.0 Notices

LENOVO PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF

ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some

jurisdictions do not allow disclaimer of express or implied warranties in certain

transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes

are periodically made to the information herein; these changes will be incorporated in

new editions of the publication. Lenovo may make improvements and/or changes in the

product(s) and/or the program(s) described in this publication at any time without notice.

Lenovo and ThinkServer are trademarks of Lenovo in the United States, other countries,

or both.

Microsoft and Windows are trademarks of Microsoft Corporation in the United States,

other countries, or both.

Other company, product, or service names may be trademarks or service marks of others.

Applicable countries and regions

Worldwide

Andere Handbücher für ThinkServer RD210

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lenovo Server Handbücher

Lenovo

Lenovo ThinkServer RD530 Merkblatt

Lenovo

Lenovo ThinkAgile MX Certified Node 1U Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR650 V3 7D75 Bedienungsanleitung

Lenovo

Lenovo ThinkServer RD330 Bedienungsanleitung

Lenovo

Lenovo Tripp Lite 2U Bedienungsanleitung

Lenovo

Lenovo ThinkServer TD230 Einrichtungshandbuch

Lenovo

Lenovo ThinkServer TS430 Bedienungsanleitung

Lenovo

Lenovo x3755 M3 Bedienungsanleitung

Lenovo

Lenovo THINKSERVER RS210 Leitfaden

Lenovo

Lenovo 7X18 Bedienungsanleitung

Lenovo

Lenovo THINKSERVER RS210 Bedienungsanleitung

Lenovo

Lenovo ThinkServer RD120 Bedienungsanleitung

Lenovo

Lenovo THINKSERVER RS210 Leitfaden

Lenovo

Lenovo ThinkServer RD210 Stücklistenhandbuch

Lenovo

Lenovo ThinkServer RD330 Bedienungsanleitung

Lenovo

Lenovo ThinkServer TS200v Leitfaden

Lenovo

Lenovo ThinkServer TD200x Leitfaden

Lenovo

Lenovo SE350 Kurzanleitung

Lenovo

Lenovo ThinkServer RD530 Bedienungsanleitung

Lenovo

Lenovo ThinkServer TS200v Bedienungsanleitung

Lenovo

Lenovo ThinkSystem DM240N Bedienungsanleitung

Lenovo

Lenovo ThinkServer RS110 Bedienungsanleitung

Lenovo

Lenovo ThinkServer TD200 Bedienungsanleitung

Lenovo

Lenovo ThinkServer TD230 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung