Leupold RCX Bedienungsanleitung

USER MANUAL

Contents

Introduction ..........................................................................................................3

Things you need to get started ............................................................................4

Controller Setup ...................................................................................................5

Camera Setup ..................................................................................................... 10

Battery Guideline ............................................................................................... 11

Camera Operation Setup .................................................................................... 12

Camera Setup with Preset Modes ...................................................................... 13

DST (Dual Sensor Technology) ........................................................................... 14

Camera Mounting .............................................................................................. 15

Custom Camera Setup ........................................................................................ 18

Using an External Power Source ........................................................................ 21

Downloading Images .........................................................................................22

Troubleshooting .................................................................................................24

Introduction

The RCX Trail Camera System is

designed to support the use of many

cameras and a single controller. The

camera is simple, high quality and

durable so you can place many cameras

in the ﬁeld, and quickly and easily

access them to change setups, use Real

Time Video Alignment and to download

images. The system works by the

camera capturing images and storing

them on an SD card that you install.

The controller also takes an SD card up

to 32 GB.

When you connect the controller to the

camera with the USB cable, you can

download images from the camera to

the controller with just a couple of quick

menu selections. You are then able

view the images right there in the ﬁeld

and make any changes to the setup you

want. The controller also allows you to

view photos from other trail cameras

when the SD cards are inserted. The

camera can be aligned using Real Time

Video Alignment™ that permits you to

see what the camera sees. Settings

can also be changed to get more or less

pictures by selecting one of 4 preset

modes, or you may access the powerful

custom menu for settings such as

multipicture, event delay, time lapse,

etc. See

“Custom Camera Setup”

page 18 for more information.

Things you need to get started

1. Camera

2. Controller

(Included in RCX Kit. Li-Ion

battery included.)

3. 8 AA Batteries

(Leupold strongly

recommends Energizer Ultimate Lithium

AA batteries, especially for use in below

freezing temperatures.)*

4. 2 SD or SDHC cards: one for the

controller, one for the camera, up to

32 GB capacity.

Accessories:

5. Mounting strap

(Comes with camera

or kit.)

6. USB Cable

(Included with kits and with

controllers.)

7. Standoffs

(Included with cameras and

kits. These are used to solidly position

the camera on uneven surfaces.)

Optional:

RCX Lockdown Security Plate

(Comes installed on RCX-2 only; for use with

Master Lock® Python™ cable or for mounting

with a single nail. Available separately for

RCX-1.)

*Alkaline batteries can leak and damage

the camera if left unattended for extended

periods, especially during below freezing

temperatures. The RCX Trail Camera

Warranty does not cover damage from battery

leakage.

Controller Set-Up

Lanyard Hole

Battery Door

Screw

Mini USB Port Cover Power Button

SD Card Slot Door3” TFT

(Thin Film Transistor)

Screen

A controller must only be set once, but

is necessary to set date and time, and to

access the features of your RCX Camera.

Every time a new camera is set up, the

time synchronizes with the controller

as soon as it is plugged in with the USB

cable.

The ﬁrst time the controller is powered

up, the ﬁrst screen presented is the

“Time/Date”

screen. To access this

screen again later, you will ﬁnd this

selection in the

“Setup Controller”

Menu. This screen will again be the ﬁrst

screen presented any time you allow

the battery to go dead for more than

24 hours.

The Lithium Ion battery is already

installed in the controller. The

controller battery should be charged

for a minimum of 2 hours before use;

however, it is preferable to charge it at

least 16 hours to ensure long hours of

use and to prevent short battery life.

To charge the RCX Controller Battery,

plug the Mini USB end of the USB cable

into the controller, then plug the other

end into a computer, the wall charger or

the car charger provided. Before going

into the ﬁeld, verify that the controller is

properly charged.

Navigate through the controller

menus by arrowing to the desired

selection.

On menu items with to the right

of the text, press the right arrow to

access the next level down in the

menu .

Press to select a menu choice.

Delete and zoom are used

only when viewing images on the

SD card.

Use to back out one menu level.

Brightness: The display brightness of

the controller can be adjusted. This is

recommended when lighting condition

change dramatically.

Time/Date: Time is in 24-hour time

only. The default date format is YYYY/

DD/MM but can be changed to other

formats.

Temp Unit: Switch between °F or °C.

Hemisphere: Set the appropriate hemisphere. The United States and Canada are

in the Northern Hemisphere. Australia, New Zealand and South Africa are in the

Southern Hemisphere.. This makes the orientation of the moon phase images correct

for your location.

Language: The controller menus can be displayed in any of the following

languages: English, German, Finnish, French, Italian, Russian, Spanish or Swedish.

6HWXS&RQWUROOHU

%ULJKWQHVV

7LPH'DWH

+HPLVSKHUH

7HPS8QLW

&RQWUROOHU9HUVLRQ 

/DQJXDJH (QJOLVK

)RUPDW6'&DUG





1RUWKHUQ

USB Port Cover

1/4-20 Tripod

Stud Mount

BOTTOM ACCESS

DOOR OPEN

BOTTOM ACCESS

DOOR CLOSED

USB Port

SD Card Slot

Battery Pack

Latch

Cover Retaining

Screw

Battery Pack

12V Jack Cover

12V Jack

Power Switch

1. Install an SD card. An SD card from

another device may already contain

ﬁles that will reduce the number of

photos you can take. To optimize the

operation of the camera’s SD card,

format it using the controller. This

can be done in the controller setup

menu and by selecting

“Format SD

Card”

from the bottom of the menu.

This will erase all SD Card contents.

Once the SD card is formatted,

insert it into the camera.

2. Open the access door and remove

the AA battery cartridge.

3. Insert 8 batteries with the negative

(ﬂat) end against the contact spring.

4. Insert the loaded battery cartridge

into the camera with the contact

side going in ﬁrst until the catch

snaps into place. Be sure to close

the bottom door securely after all

setup is complete to ensure good

contact pressure.

Camera Setup

;;;;;;;; 

3RZHU6DYHU0RGH

5&;&DPHUD,QIR %UDG

6HWXS&DPHUD

Camera Status

Inhaltsverzeichnis

Andere Leupold Scouting-Kamera Handbücher

Leupold

Leupold RCX Trail Camera System Bedienungsanleitung

Beliebte Scouting-Kamera Handbücher anderer Marken

Nestbox

Nestbox C13 Bedienungsanleitung

Wildview

Wildview STC-TGL1 Bedienungsanleitung

Stealth Cam

Stealth Cam CORE STC-Z3IRTL Bedienungsanleitung

Suntek

Suntek HC-800M Bedienungsanleitung

Spypoint

Spypoint G4 Bedienungsanleitung

Duramaxx

Duramaxx 10029765 Bedienungsanleitung

Brecom

Brecom C2400 Bedienungsanleitung

BlazeVideo

BlazeVideo A280W Bedienungsanleitung

Bestok

Bestok 5210GM Bedienungsanleitung

GardePro

GardePro X60P Bedienungsanleitung

Delta-Opti

Delta-Opti HC-SG880MK-18MHD Bedienungsanleitung

PNI

PNI HUNTING 280C Bedienungsanleitung

Muddy

Muddy Pro-Cam 14 Bedienungsanleitung

Bresser

Bresser 3310006 Bedienungsanleitung

Recon Outdoors

Recon Outdoors HS410 Bedienungsanleitung

Braun

Braun 57660 Bedienungsanleitung

Wildgame

Wildgame Shadow Bedienungsanleitung

Hieha

Hieha WiFi900Pro Montageanleitung