LevelOne FCS-1030 Bedienungsanleitung

LevelOne

FCS-1030

10/100Mbps IP Network Camera

Quick Install Guide

English

Deutsch

Nederlands

Italiano

Español

Português

Français

Ελληνικά

한국어

日本語

繁體中文

简体中文

Английский

ภาษาไทย

ﻲﺑﺮﻋ

This guide covers only the most common situations. All detail

information is described in the user’s manual.

Viewing System Requirements

 Windows 98, 98SE, Millennium Edition (ME), 2000 and XP

operating systems

 Browser: Internet Explorer 5.0 or above

NOTE:

All the captured images of installation mentioned in this user’s

manual were based on Windows XP operating system. For

installation on other Windows OS, e.g. Windows 98SE, all the

procedures remains the same.

Physical Description

Front panel

Rear panel

Check your package contents

 One FCS-1030 IP Network Camera

 One Camera Stand

 One Power Adapter

 One Software CD

 One Ethernet Cable

Install the camera into the network

Connects the Ethernet cable from RJ-45 socket to a router, a switch,

a Hub or a PC.

Connects the power adapter to the power socket of the FCS-1030 IP

Network Camera and plug the power adapter to the power outlet.

English

Using the Software CD to configure the camera

Power on your PC and insert the CD-ROM

The setup page should load automatically. If it does not, please

select your CD-ROM drive manually to open the setup page.

Click “Install

Software”

Select “Installation

Wizard” to initiate

the installation.

Follow the step to configure the first IP Network Camera that you

have.

Click “Next” to start

the installation.

If you wish to install

the software

program in an

alternate location,

click “Browse”,

otherwise click

“Next” to move on

to the next step.

Click “Next” to

install the software.

Click “Finish” to

complete the

software

installation.

IP Installer screen shall

show up.

The IP Installer will

show a MAC address

and an IP Address of

available FCS-1030.

Highlight the MAC

address and click on

“Link to selected

device”.

After successful linkage,

the authentication

window should pop up.

The default user name

is “root”.

The default password

is the MAC address of

your own FCS-1030,

which marks at the

bottom label of each

device.

Please enter the MAC address in capital letters.

Viewing Your LevelOne FCS-1030

The following

screen would

appear

automatically after

successful login.

Click “Yes” and

proceed.

FCS-1030 should

be active by now.

Congratulations,

you can use the

camera through

the network to

view the video.

Andere Handbücher für FCS-1030

Inhaltsverzeichnis

Andere LevelOne Sicherheitskamera Handbücher

LevelOne

LevelOne FCS-5056 Bedienungsanleitung

LevelOne

LevelOne FCS-1132 Bedienungsanleitung

LevelOne

LevelOne FCS-1121 Bedienungsanleitung

LevelOne

LevelOne FCS-3081 Bedienungsanleitung

LevelOne

LevelOne FCS-5051 Bedienungsanleitung

LevelOne

LevelOne CamCon WCS-2030 Benutzerhandbuch

LevelOne

LevelOne WCS-0040 Bedienungsanleitung

LevelOne

LevelOne FCS-0031 Bedienungsanleitung

LevelOne

LevelOne CamCon FCS-1070 Bedienungsanleitung

LevelOne

LevelOne FCS-3071 Bedienungsanleitung

LevelOne

LevelOne FCS-0071 Bedienungsanleitung

LevelOne

LevelOne FCS-4101 Bedienungsanleitung

LevelOne

LevelOne CamCon WCS-2070 Bedienungsanleitung

LevelOne

LevelOne FCS-3091 Bedienungsanleitung

LevelOne

LevelOne CamCon WCS-2030 Bedienungsanleitung

LevelOne

LevelOne CamCon FCS-3000 Bedienungsanleitung

LevelOne

LevelOne GEMINI FCS-4051 Bedienungsanleitung

LevelOne

LevelOne WCS-2060 Bedienungsanleitung

LevelOne

LevelOne FCS-1151 Bedienungsanleitung

LevelOne

LevelOne FCS-3072 Gebrauchsanweisung

LevelOne

LevelOne FCS-3071 Bedienungsanleitung

LevelOne

LevelOne FCS-1131 Bedienungsanleitung

LevelOne

LevelOne CamCon FCS-4020 Bedienungsanleitung

LevelOne

LevelOne FCS-1122 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung