Leviton D4200 Bedienungsanleitung
User Guide
D4200TM LCD
ARCHITECTURAL CONTROL
STATION
Software revision 2.0 and above
NOTES:
User Guide
Leviton D4200 LCD Ver 2.0 Architectural Lighting Controller i
Table of Contents
WARNINGS............................................................... 1
INSTALLATION RECOMMENDATIONS................................ 2
INSTALLATION
Plan the System ................................................................. 3
Power Requirements and Max Wire Lengths ......................... 6
Terminating the Wire.......................................................... 7
Luma-Net III.................................................................7
Luma-Net III Wire Recommendations .............................9
Wiring the Phoenix Connector ......................................11
Testing the Wiring .......................................................13
Configuring the Dimmer Cabinets .......................................14
Install the Unit to the Wall .................................................14
Power Up the Unit .............................................................17
Checking the Version and Network ID .................................18
INITIAL SETUP AND PROGRAMMING .......................... 19
Main Menu Flow Chart .......................................................20
Programming and Configuration Level Flowchart................. 21
Requirements for Setup .................................................... 18
Navigating Menus..............................................................23
Programming and Configuration Level Menu....................... 24
Accessing Programming and Configuration Level........... 24
Setting the Network ID ............................................... 25
More on Network IDs and Remote IDs ......................... 27
Assigning Zones (Patching) ......................................... 28
Misc. Settings Menu.....................................................29
Flags ....................................................................29
Dimmer Readback ...........................................31
Double Bump ..................................................32
LCD Backlight ..................................................33
Time Master ....................................................34
Old Code Compatibility.....................................35
IR Control .......................................................36
Astronomical Clock Setup .................................36
Max. Number of Zones Setup ...........................38
User Guide
Leviton D4200 LCD Ver 2.0 Architectural Lighting Controller ii
Personalities................................................................39
Main Level Menus - Setup ..................................................41
Scheduling ..................................................................41
Editing the Scheduler .............................................41
Enabling the Scheduling .........................................43
Sequencer...................................................................43
Editing the Sequencer ............................................44
Enabling the Sequencer .........................................45
Zone Labels ................................................................45
Zone Excludes .............................................................47
Setting Date and Time .................................................48
Editing Daylight Savings Time Region ...........................49
Locks..........................................................................50
Setting the Record Lock Code.................................50
Setting the Station Lock Code.................................51
Enabling Record Lock.............................................51
Enabling Station Lock.............................................52
Overriding a Lock ..................................................53
OVERVIEW OF UNIT CONTROLS................................. 54
Functions..........................................................................54
Controls............................................................................54
OPERATION ............................................................ 57
Controlling Light Levels ......................................................57
Minimum and Maximum Lighting Levels ........................57
Individual Lighting Levels ............................................. 59
Checking Zone Names and Lighting Levels ..........................60
Checking Scene Names ......................................................61
Recording a Scene.............................................................61
Snapshotting Light Levels from and Entry Station ................62
Changing the MAX and OFF Lighting Levels .........................62
Using the Optional Remote Control .....................................63
Viewing Scheduled Events..................................................64
Viewing the Sequencer ......................................................64
APPENDIX A - SETUP TABLES ................................... 66
APPENDIX B - LATITUDE AND LONGITUDE CHARTS ..... 70
User Guide
Leviton D4200 LCD Ver 2.0 Architectural Lighting Controller iii
APPENDIX C - MISCELLANEOUS INFORMATION ........... 79
Clearing the Stations Memory.............................................79
User Guide
Leviton D4200 LCD Ver 2.0 Architectural Lighting Controller Page 1 of 80
Warnings
1: To be installed and/or used in accordance with appropriate
electrical codes and regulations.
2: To be installed by a qualified Electrician.
3: DO NOT CONNECT line voltage wires to low voltage terminals.
4: For best lamp life, lamp manufacturers recommend their
fluorescent lamps should be operated at full brightness for a
minimum or 100 hours before dimming is permitted. For best
results, lamp brands and types should not be intermixed on a
circuit
5: Disconnect power when servicing the dimmer, fixture or when
changing lamps.
6: Indoor use only.
7: TO AVOID FIRE, SHOCK OR DEATH: TURN OFF POWER AT
MAIN CIRCUIT BREAKER OR FUSE AND TEST THAT THE
POWER IS OFF BEFORE WIRING!
User Guide
Leviton D4200 LCD Ver 2.0 Architectural Lighting Controller Page 2 of 80
Installation Recommendations
For best results using the Dimension 4200 Architectural Lighting
Controller, follow these recommendations:
1: Plan the system before beginning the installation.
2: Terminate the wiring
3: Test the wiring.
Verify wiring for shorts and open circuits.
4: Install all Stations
5: Connect dimmer cabinets.
6: Power up the Stations
7: Program Each Station
Assign unique network ID numbers to stations.
Connect one master station, and then one remote control
station at a time.
Verify that the first D4200 can properly control the dimmers
assigned to it.
Check the proper operation of each station as it is installed
when multiple stations are involved.
If the lighting control fails or becomes sporadic, first
check the wiring or network ID.
User Guide
Leviton D4200 LCD Ver 2.0 Architectural Lighting Controller Page 3 of 80
Installation
Plan the System:
The system should be carefully planned out to take into consideration
these important issues:
•Power Supply for Control Stations
•Wire Size for Power Runs
On most systems, our applications engineering department has
already managed these calculations for you so this information should
be irrelevant. However, if this is not the case, like an ASAP (Quick
Ship) program, when adding on to a system or planning for a
remodel, you will want to take this information into consideration.
Power Requirements & Maximum Run Length
Each device on a Luma-Net network has a different load (draw) and
each source of power can support a different total load (supply.) To
determine the total capacity of your network, first determine the
maximum supply current of your power source, convert that to Unit
Loads, then determine the total load it can handle by summing the
load of each device.
One Unit Load = 25mA
Figure 1 - Load Rating Verification Formula
Control Station A Unit Load
X
Quantity of Station A's attached +Same formula
for any other attached
control Station
Control Station B Unit Load
X
Quantity of Station B's attached
<
+Power Supply's
Available Unit Load
User Guide
Leviton D4200 LCD Ver 2.0 Architectural Lighting Controller Page 4 of 80
Table 1 -
Power Supply Maximum Unit Loads
Supply Maximum # of Unit Loads
a-2000D, 18 Channel,
Standard Power Supply
49
a-2000D, 24 Channel
Standard Power Supply
47
a-2000D, 18 Channel,
Large Power Supply
117
a-2000D, 24 Channel
Large Power Supply
114
NPC – XP 49
NPC – DHV 0 (no Luma-Net)
NPC – DLR 49
i-Series e Dimmer Rack Consult Factory
Topaz/ENR Dimmer Rack Use DLR or NPC XP as Power
Supply
User Guide
Leviton D4200 LCD Ver 2.0 Architectural Lighting Controller Page 5 of 80
Table 2 - Control Station Loads
Example:
Suppose we had a network with the following equipment:
•D4200 LCD Stations
•D4200 Entry Stations
•Remote IR Station
•Powered from an a-2000 24 Cabinet with a Standard Power
Supply
Use these quantities along with the Load Rating verification formula
(Figure 1) to do the math and verify that the combined unit input load
does not exceed the maximum input Unit Load Available.
Station Type Unit Load
(per
station)
Station Type Unit
Load
(per
station)
D4200 LCD 5 D8000 Key switch 1
D4200 Entry
(Button)
2 D8000 Port (LumaEdit,
A/V, etc.)
2
D4200 Combine/
Closure (Simple)
2 D8000 Combine/Closure
(Advanced)
11
D4200 Remote I/R 2 Sapphire LCD 3
Luma-Net Hub 6 Sapphire Slider 2
D8000 LCD 3 Sapphire Button
Stations
2
D8000 Entry
(Button)
2
D8000 Slider 2
Andere Handbücher für D4200
4
Inhaltsverzeichnis
Andere Leviton Steuerungssystem Handbücher
Leviton
Leviton 48211-AVC Bedienungsanleitung
Leviton
Leviton DOS05 Bedienungsanleitung
Leviton
Leviton Dimensions D3200 Benutzerhandbuch
Leviton
Leviton 4106 Bedienungsanleitung
Leviton
Leviton DOS05 Bedienungsanleitung
Leviton
Leviton Decora DZR15 Bedienungsanleitung
Leviton
Leviton 600 Series Bedienungsanleitung
Leviton
Leviton Lumina LU20S-DNW Bedienungsanleitung
Leviton
Leviton DMX-512 Bedienungsanleitung
