Lexmark MX71 series Betriebsanleitung

Repair information

Removal precautions

CAUTION—SHOCK HAZARD: For personal safety and to prevent damage to the printer, remove the power cord

from the electrical outlet before you connect or disconnect any cable, electronic board, or assembly. Disconnect

any connections between the printer and the PCs/peripherals.

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more

trained personnel to lift it safely

Data security notice

1This printer contains various types of memory that are capable of storing device and network settings, information

from embedded solutions, and user data. The types of memory, along with the types of data stored by each, are

described below.

•Volatile memory—This device utilizes standard Random Access Memory (RAM) to temporarily buffer user data

during simple print and copy jobs.

•Non-volatile memory—This device may utilize two forms of non-volatile memory: EEPROM and NAND (flash

memory). Both types are used to store the operating system, device settings, network information, scanner and

bookmark settings, and embedded solutions.

•Hard disk memory—Some devices have a hard disk drive installed. The printer hard disk is designed for device-

specific functionality and cannot be used for long term storage for data that is not print-related. The hard disk

does not provide the capability for users to extract information, create folders, create disk or network file shares,

or transfer FTP information directly from a client device. The hard disk can retain buffered user data from

complex print jobs, as well as form data and font data.

To erase volatile memory, turn off the printer.

To erase non-volatile memory, see the menu item under “Configuration menu” on page 356 pertaining to this.

To erase the printer hard disk, see the menu item under “Configuration menu” on page 356 pertaining to this.

The following parts are capable of storing memory:

•printer control panel

•UICC (User Interface Controller Card)

•controller board

•optional hard drives

Note: The printer control panel and controller board contain NVRAM.

2After removing the old part, it must be returned to your next level of support.

7463

Repair information

371

Handling ESD‑sensitive parts

Many electronic products use parts that are known to be sensitive to electrostatic discharge (ESD). To prevent damage

to ESD-sensitive parts, use the following instructions in addition to all the usual precautions, such as turning off power

before removing logic boards:

•Keep the ESD-sensitive part in its original shipping container (a special “ESD bag”) until you are ready to install the

part into the machine.

•Make the least-possible movements with your body to prevent an increase of static electricity from clothing fibers,

carpets, and furniture.

•Put the ESD wrist strap on your wrist. Connect the wrist band to the system ground point. This discharges any static

electricity in your body to the machine.

•Hold the ESD-sensitive part by its edge connector shroud (cover); do not touch its pins. If you are removing a

pluggable module, use the correct tool.

•Do not place the ESD-sensitive part on the machine cover or on a metal table; if you need to put down the ESD-

sensitive part for any reason, first put it into its special bag.

•Machine covers and metal tables are electrical grounds. They increase the risk of damage, because they make a

discharge path from your body through the ESD-sensitive part. (Large metal objects can be discharge paths without

being grounded.)

•Prevent ESD-sensitive parts from being accidentally touched by other personnel. Install machine covers when you

are not working on the machine, and do not put unprotected ESD-sensitive parts on a table.

•If possible, keep all ESD-sensitive parts in a grounded metal cabinet (case).

•Be extra careful while working with ESD-sensitive parts when cold-weather heating is used, because low humidity

increases static electricity.

Controller board/control panel replacement

This procedure should be followed only if both the controller board and the control panel fail. If you need to replace

only one of the FRUs, follow the startup procedure described in the FRU’s removal procedure.

CAUTION—POTENTIAL INJURY

The lithium battery in this product is not intended to be replaced. There is a danger of explosion if a lithium

battery is incorrectly replaced. Do not recharge, disassemble, or incinerate a lithium battery. Discard used

lithium batteries according to the manufacturer's instructions and local regulations.

Warning—Potential Damage: If the control panel and the controller board are being replaced at the same time,

replace the parts in this order to avoid damage to the machine.

1Replace the controller board first.

Note: Do not replace the new control panel and controller board in the machine at the same time.

2After installing the new controller board, and before installing the new control panel, start the printer into

diagnostics mode.

3After the printer has completed startup, turn off the printer and replace the control panel.

Note: If the control panel display has failed, the printers’ startup cycle is complete when the driver motor and

fans shut down, and the machine is quiet.

7463

Repair information

372

4After installing the new control panel, start the printer into diagnostics mode, and allow the printer to go through

a complete startup cycle and the display to go to Ready.

5If the problems persist, leave the new control panel in the machine, place the old controller board back in the

machine, and start it up. After the machine startup, shut down the machine, and install the new controller board.

After installing the new controller board, restart the machine, and let it go through the startup cycle.

After this procedure is completed successfully, there is no need to adjust any settings.

If the above procedure fails, you must contact the technical support center for further instructions.

Restoring the printer configuration after replacing the controller board

Restore the printer to its correct configuration to complete the replacement service. Use the Service Restore Tool to

download the software bundle, and then flash the printer settings and Embedded Solutions.

Note: The software bundle contains the latest version of the firmware, applications, and software licenses from the

Lexmark Virtual Solutions Center (VSC). The printer firmware may be at a different level from what was used before

replacing the controller board.

Using the Service Restore Tool

1Go to https://cdp.lexmark.com/service-restore-tool/ to access the tool.

2Log in using your Lexmark or partner login.

If your login fails, then contact your next level of support.

3Enter the printer serial number, and then submit the information.

Note: Make sure that the serial number that appears on the verification screen is correct.

7463

Repair information

373

4Save the zip file.

Note: Make sure that the serial number in the zip file matches the serial number of the printer being restored.

5Extract the contents of the zip file, open the Readme file, and then follow the instructions in the file.

Notes:

•Perform the install instructions on the Readme file in the exact order shown. Only restart the printer when

instructed to in the file.

•For more information on how to flash the downloaded files, see “Updating the printer firmware ” on

page 377.

•To load the zip files that are extracted from the Service Restore Tool, see “Restoring solutions, licenses, and

configuration settings” on page 376.

7463

Repair information

374

6After performing the installation instructions in the Readme file, confirm from the customer if all the eSF apps have

been installed.

Notes:

•If you are unable to access the administrative menus to verify that the printer is restored, then ask the

customer for access rights.

•If a 10.00 error is displayed after you restart the printer, then contact the next level of support.

7463

Repair information

375

Restoring solutions, licenses, and configuration settings

To load the zip files that are extracted from the Service Restore Tool, do the following:

1Open a Web browser, and then type the printer IP address.

2Navigate to Settings > Configuration Files.

3From the Configuration File History tab, navigate to Import > Choose File.

4Select the zip file from the expanded Service Restore Tool package.

7463

Repair information

376

5Click Import.

6Repeat steps 3 to 5 for the other zip files that are included in the expanded zip file.

Updating the printer firmware

Warning—Potential Damage: Before updating the printer firmware, ask the next level of support for the correct

code. Using an incorrect code level may damage the printer.

The printer must be in ready state in order to update the firmware.

Using a flash drive

This option is available only in printer models with front USB port.

Make sure to enable the Enable Drive and Update Code settings. You can find the settings in the Flash drive menu under

the Settings menu.

1Insert the flash drive into the USB port.

2From the home screen, navigate to USB Menu: Print from USB > Accept or OK.

3Select the file that you need to flash.

Note: Do not turn off the printer while the update is going on.

7463

Repair information

377

Using a network computer

Using the File Transfer Protocol (FTP)

Make sure that the printer is in ready state before flashing the printer.

1Turn on the printer.

2Obtain the IP address:

•From the home screen

•From the TCP/IP section of the Network/Ports menu

3From the command prompt of a network computer, open an FTP session to the printer IP address.

4Use a PUT command to place the firmware file on the printer.

The printer performs a POR sequence and terminates the FTP session.

5Repeat steps 2 through 4 for the other files.

Using the Embedded Web Server

Make sure that the printer is in ready state before flashing the printer.

1Open a Web browser, and then type the printer IP address.

2From the home page, navigate to Configuration > Update Firmware.

3Select the file to use.

The printer performs a POR sequence and terminates the FTP session.

4Repeat steps 2 through 4 for the other files.

Backing up eSF solutions and settings

Note: Export the eSF solutions and settings from the printer before replacing the controller board.

Exporting eSF solutions and settings file

1POR the printer into Invalid engine mode. See “Entering invalid engine mode” on page 369.

2Open a Web browser, and then type the printer IP address.

Note: If the Web page cannot be accessed or an error occurs when starting the printer into Invalid engine mode,

then data backup is not an option. Inform the customer that the data cannot be saved.

3Navigate to Settings > Solutions > Embedded Solutions.

4From the Embedded Solutions page, select the applications that you want to export.

5Click Export.

Note: There is a size limit of 128 KB on the export file.

7463

Repair information

378

Importing eSF solutions and settings file

After replacing the controller board, import back to the printer the eSF solutions and settings that were exported.

1POR the printer into Invalid engine mode. See “Entering invalid engine mode” on page 369.

2Open a Web browser, and then type the printer IP address.

Note: If the Web page cannot be accessed or an error occurs when starting the printer into Invalid engine mode,

then data backup is not an option. Inform the customer that the data cannot be saved.

3Navigate to Settings > Solutions > Embedded Solutions.

4From the Embedded Solutions page, select the applications that you want to import.

5Click Import.

Ribbon cable connectors

Zero Insertion Force (ZIF) connectors

Zero Insertion Force (ZIF) connectors are used on the boards and cards used in this printer. Before inserting or removing

a cable from these connectors, read this entire section. Great care must be taken to avoid damaging the connector or

cable when inserting or removing the cable.

Warning—Potential Damage: Do not insert the cable so that the contacts are facing the locking actuator. The

contacts always face away from the actuator.

Warning—Potential Damage: Do not insert the cable diagonally into the ZIF socket. This can cause damage to the

contacts on the cable.

Warning—Potential Damage: Avoid using a fingernail, or sharp object to open the locking mechanism. This could

damage the cable.

Warning—Potential Damage: Avoid pressing against the cable when opening the locking mechanism. This can also

damage the cable.

These are the types of ZIF connectors used in this printer:

•Horizontal top contact connector

•Horizontal bottom contact connector

•Vertical mount contact connector

•Horizontal sliding connector

7463

Repair information

379

Horizontal top contact connector

This FRU contains a horizontal top contact cable connector. Read the instructions before proceeding.

The horizontal top contact connector uses a back flip locking actuator to lock the ribbon cable into the Zero Insertion

Force (ZIF) connector. The cable is inserted horizontally into the connector.

Warning—Potential Damage: When opening or closing this type of actuator, gently lift or close the two tabs located

on each end of the actuator. The two tabs should be moved simultaneously. Do not close the actuator from the

center of the actuator.

Removing a cable from the horizontal top contact connector

1Place a finger at each end of the locking actuator, and then gently lift the actuator to the unlocked position.

2Slide the cable out of the connector.

7463

Repair information

380

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lexmark Multifunktionsdrucker Handbücher

Lexmark

Lexmark C91x Bedienungsanleitung

Lexmark

Lexmark X73 Series Bedienungsanleitung

Lexmark

Lexmark S800 Series Bedienungsanleitung

Lexmark

Lexmark X950 Series Bedienungsanleitung

Lexmark

Lexmark CX310 series Bedienungsanleitung

Lexmark

Lexmark X543DN Handbuch

Lexmark

Lexmark Interpret S405 Bedienungsanleitung

Lexmark

Lexmark X463de Bedienungsanleitung

Lexmark

Lexmark X646e MFP Bedienungsanleitung

Lexmark

Lexmark XM1145 Bedienungsanleitung

Lexmark

Lexmark XM7100 Series Bedienungsanleitung

Lexmark

Lexmark S600 Bedienungsanleitung

Lexmark

Lexmark 1410685 Bedienungsanleitung

Lexmark

Lexmark X950de Installationsanleitung

Lexmark

Lexmark MX71X Bedienerhandbuch

Lexmark

Lexmark 9500 Series Bedienungsanleitung

Lexmark

Lexmark 8300 Series Technisches Datenblatt

Lexmark

Lexmark 7100 series Bedienungsanleitung

Lexmark

Lexmark MS910 Series Bedienungsanleitung

Lexmark

Lexmark 3150 - P Color Inkjet Handbuch

Lexmark

Lexmark X63 Bedienungsanleitung

Lexmark

Lexmark C734dn Bedienungsanleitung

Lexmark

Lexmark 9300 Series Bedienungsanleitung

Lexmark

Lexmark XC2130 Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Brother

Brother MFC-9760 Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung

Copystar

Copystar CS 4551ci Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 4650EN Bedienungsanleitung

Brother

Brother MFC-9840CDW Bedienungsanleitung