Lexmark OptraImage 232 Bedienungsanleitung
www.lexmark.com
Setup Guide
October 2000
Lexmark OptraImage 242/232
Edition: October 2000
The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES
THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain
transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated
in later editions. Improvements or changes in the products or the programs described may be made at any time.
Comments may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United
Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or
distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. You can purchase additional copies of publications
related to this product by calling 1-800-553-9727. In the United Kingdom and Eire, call 0628-481500. In other countries, contact your point of purchase.
References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates.
Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent
product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with
other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.
Lexmark and Lexmark with diamond design, MarkNet, MarkVision, and Optra are trademarks of Lexmark International, Inc., registered in the United States and/or other
countries. OptraImage and MarkTrack are trademarks of Lexmark International, Inc. PostScript® is a registered trademark of Adobe Systems Incorporated. PostScript
Level 2 or PostScript 3 is Adobe Systems’ designation of a set of printer commands (language) and functions included in its software products. This printer is intended to
be compatible with the PostScript Level 2 or PostScript 3 language. This means the printer recognizes PostScript Level 2 or PostScript 3 commands used in various
application programs, and that the printer emulates the functions corresponding to the commands. Other trademarks are the property of their respective owners.
© Copyright 1999, 2000 Lexmark International, Inc.
All rights reserved.
UNITED STATES GOVERNMENT RESTRICTED RIGHTS
This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to restrictions as set forth in sub-
paragraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc.,
Lexington, KY 40550.
OptraImage Setup Guide 3
OptraImage
Setup Guide
English
For use with OptraImage 242/232
Safety information - - - - - - - - - - - - - - 4
Set up your printer - - - - - - - - - - - - - - 5
Install the MarkNet print server - - - - - - - - 6
Unlock the scan unit - - - - - - - - - - - - - 7
Install paper feed tray and paper stop- - - - - 8
Attach cables and power cords - - - - - - - - 9
Turn on scan unit and printer - - - - - - - - 12
Assign a network address - - - - - - - - - 13
Set default copy settings - - - - - - - - - - 15
Set up to send and receive faxes - - - - - - 17
Set up network scanning - - - - - - - - - - 21
Verify the setup - - - - - - - - - - - - - - 24
Distribute OptraImage user instructions- - - 25
Solve setup problems - - - - - - - - - - - 26
Maintain your scanner - - - - - - - - - - - 27
Notices - - - - - - - - - - - - - - - - - - 30
4OptraImage Setup Guide
Safety information
General safety
information Always follow all safety precautions when installing or using
telephone equipment to reduce the risk of fire, electric shock
and injury to persons, including the following:
• If your product is NOT marked with this symbol , it
MUST be connected to a properly grounded electrical
outlet.
• The power cord must be connected to an electrical outlet
near the product and easily accessible.
• Refer service or repairs, other than those described in the
operating instructions, to a professional service person.
• This product is designed, tested, and approved to meet
strict global safety standards with the use of specific
Lexmark components. The safety features of some parts
may not always be obvious. Lexmark is not responsible for
damages resulting from the use of other replacement
parts.
Fax and telephone
safety information • When installing the LexmarkMarkNetN2501e print
server containing the fax modem port, follow all safety
precautions of any equipment into which the card is being
installed.
• Do not perform the setup procedures in this guide during
a lightning storm.
• Never install or use this equipment in wet locations.
• Before attempting to access the printer compartment
where the option card is installed, you must remove the
fax phone line cable first from the wall outlet, and then
from the fax modem port of the MarkNet print server.
OptraImage Setup Guide 5
Step 1: Set up your printer
1Set up the printer according to the instructions in the
documentation shipped with your printer. This includes
setting up all bins and trays, duplex hardware, and any
other options purchased.
You may have received more than one
copy of the Drivers, MarkVision, and
Utilities CD. When installing printer
drivers, make sure you use the latest
version.
If you attach the printer to a network, save your network
setup page to use the information contained on it during
the OptraImage setup.
2Verify the printer hardware setup by printing the menu
settings page. Instructions for printing this page are
included in your printer setup documentation.
3Turn the printer power off before continuing with the next
step. Read the following caution statement.
CAUTION:
Turn All Power Off Before and during OptraImage setup, unplug all power cords,
fax/phone cables, and network cables from their electrical
outlets. This includes all cords and cables attached to a
workstation, printer, MarkNet print server, scan unit, and any
other peripherals powered from an outlet.
Following setup, all equipment may be plugged into properly
grounded or fax/phone outlets and turned on.
6OptraImage Setup Guide
Step 2: Install the MarkNet print
server
CAUTION! Before installing the
MarkNet N2501e print server in your
printer, make sure the fax/phone cable
is not plugged into the card or the wall
outlet. Make sure your printer is
unplugged.
If your printer shipped with the MarkNet N2501e or N2401e
print server already installed, skip to the next step.
Install the MarkNet N2501e or N2401e print server in an
available optional card slot inside your printer. (MarkNet
internal print servers are sometimes called printer option
cards.)
For detailed instructions about installing your print server,
refer to your printer setup documentation.
See “Safety information” on page 4 for
additional caution information.
MarkNet N2501e print server ports
SCSI port (OptraImage scan
unit attaches here) Ethernet 10/100
port (uses RJ-45
cable)
Fax Modem
port (uses RJ-
11 cable)
MarkNet 2401e print server ports
SCSI port (OptraImage scan
unit attaches here) Ethernet 10/100
port (uses RJ-45
cable)
OptraImage Setup Guide 7
Step 3: Unlock the scan unit
Scan units are locked during shipping to protect the scanning
mechanism from being damaged.
You must unlock the scan unit before you can use it.
1Locate the lock switch on the bottom of the scan unit.
2Push the switch up to the unlocked position.
8OptraImage Setup Guide
Step 4: Install paper feed tray and
paper stop
1Connect the paper extension to the paper feed tray.
2Attach the paper feed tray to the automatic document
feeder.
3Attach the paper stop to the top cover.
Paper extension
Paper feed tray
Paper stop
Top cover
Automatic
document
feeder
OptraImage Setup Guide 9
Step 5: Attach cables and power cords
Attach all the cables and power cords to the OptraImage
hardware, but do not plug the power cords into electrical
outlets.
It is important to turn the power on in the correct sequence.
See “Turn on scan unit and printer” on page 12 for detailed
information.
Printer power cord
OptraImage
power adapter
OptraImage
Y line cord
SCSI cable
Automatic document
feeder cable
10 OptraImage Setup Guide
Telephone fax cable
Germany: Use only the German TAE
type F adapter (P/N 14B5123) shipped
with this product because it contains a
billing tone filter. The adapter is
designed only for the F connector of the
German wall outlet. This must be the
only device attached to the NFN wall
receptacle. Switzerland: Use only the
Swiss adapter (P/N 14B5109) shipped
with this product because it contains a
billing tone filter.
To send or receive faxes, you must plug the RJ-11 telephone
fax line cable into the fax modem port of the back on the
MarkNet N2501e print server installed in your printer.
If you received a telephone adapter specifically designed for
use in your country, attach the telephone adapter to the
telephone fax line cable. Do not plug the fax telephone cable
into the outlet yet.
Network cable
If you want to be able to send network print jobs to your
OptraImage printer, plug the Ethernet cable into the Ethernet
network port on the back of the MarkNet print server installed
in your printer.
SCSI cable
Ethernet
network cable
Telephone fax
line cable
(RJ-11)
Back of printer
Andere Handbücher für OptraImage 232
3
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Sprachen:
Andere Lexmark Multifunktionsdrucker Handbücher
Lexmark
Lexmark Clinical Assistant X646dte Bedienungsanleitung
Lexmark
Lexmark 3200 - MFP - Option Bedienungsanleitung
Lexmark
Lexmark 13C1104 - X 466dwe B/W Laser Bedienungsanleitung
Lexmark
Lexmark MX6500 Bedienungsanleitung
Lexmark
Lexmark X422 Bedienungsanleitung
Lexmark
Lexmark MX532 Bedienungsanleitung
Lexmark
Lexmark CX310 series Bedienungsanleitung
Lexmark
Lexmark CS410 series Bedienungsanleitung
Lexmark
Lexmark 90T9105 Bedienungsanleitung
Lexmark
Lexmark 3048476 Bedienungsanleitung
Lexmark
Lexmark 560n - X Color Laser Handbuch
Lexmark
Lexmark CX417de Bedienungsanleitung
Lexmark
Lexmark XS925de Bedienungsanleitung
Lexmark
Lexmark X544 Betriebsanleitung
Lexmark
Lexmark 6500E Bedienungsanleitung
Lexmark
Lexmark X264dn Bedienungsanleitung
Lexmark
Lexmark XM1140 Bedienungsanleitung
Lexmark
Lexmark XC4240 Bedienungsanleitung
Lexmark
Lexmark X548DTE Bedienungsanleitung
Lexmark
Lexmark 131 Bedienungsanleitung
Beliebte Multifunktionsdrucker Handbücher anderer Marken
Triumph Adler
Triumph Adler DC 2016 Handbuch
Epson
Epson WorkForce WF-2510 Benutzerhandbuch
Epson
Epson Stylus Scan 2000 Installations- und Betriebshandbuch
Epson
Epson PictureMate Snap PM 240 Bedienungsanleitung
Konica Minolta
Konica Minolta bizhub C35 Bedienungsanleitung
Brother
Brother MFC-J430w Bedienungsanleitung
Brother
Brother Business Smart MFC-J4510dw Bedienungsanleitung
Epson
Epson Stylus CX8400 Series Bedienungsanleitung
Oce
Oce VarioLink 5022 Bedienungsanleitung
Copystar
Copystar CS 4551ci Bedienungsanleitung
Konica Minolta
Konica Minolta Magicolor 4650EN Bedienungsanleitung
Brother
Brother MFC-9840CDW Bedienungsanleitung