Lexmark 4090-001 Bedienungsanleitung

4090-001

Color Jetprinter™ 2070

Lexmark and Lexmark with diamond

design are trademarks of Lexmark

International, Inc., registered in the

United States and/or other countries.

• Table of Contents

•Index

• Safety and Notices

• Trademarks

• Start Diagnostics

• Manuals Menu

Third Edition (July, 1997)

The following paragraph does not apply to the United Kingdom or any country where such

provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. PROVIDES

THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do

not allow disclaimer of express or implied warrantiesin certain transactions, therefore, this

statement may not apply to you.This publication could include technical inaccuracies or

typographical errors. Changes are periodically made to the information herein; these

changes will be incorporated in later editions of the publication. Improvements or changes

in the products or the programs described in this publication may be made at any time.

Publications are not stocked at the address given below; requests for publications should

be made to your point of purchase.

Comments may be addressed to Lexmark International, Inc., Department D22A/035-3,

740 New Circle Road, Lexington, Kentucky 40550, U.S.A. Lexmark may use or distribute

any of the information you supply in any way it believes appropriate without incurring any

obligation to you.

Lexmark is a trademark of Lexmark International, Inc., registered in the United States

and/or other countries.

Color Jetprinter is a trademark of Lexmark International, Inc.

Other trademarks are the property of their respective owners.

UNITED STATES GOVERNMENT RESTRICTED RIGHTS

This software and documentation are provided with RESTRICTED RIGHTS. Use,

duplication or disclosure by the Government is subject to restrictions as set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at

DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc.,

Lexington, KY 40550.

4090-001

iii

4090-001

Contents 1

Contents ..............................................iii

Preface ...............................................vi

SafetyInformation..................................... vi

GeneralInformation....................................1-1

Resolution and Print Speed ............................1-1

PowerConsumption..................................1-1

Maintenance Approach................................1-1

Abbreviations....................................1-2

UniqueToolsRequiredForService...................1-2

DiagnosticInformation .................................2-1

Start..............................................2-1

ErrorIndicatorTable...............................2-2

Power-On Self Test (POST) Sequence ................2-2

POSTSymptomTable.............................2-3

SymptomTables .................................2-4

ServiceChecks......................................2-6

EnvelopeFeedServiceCheck.......................2-6

FirstPrintLineServiceCheck.......................2-6

MaintenanceStationServiceCheck ..................2-7

Paper Feed Service Check .........................2-8

Paper Path Service Check.........................2-10

ParallelPortServiceCheck........................2-11

PowerServiceCheck.............................2-11

PrintQualityServiceCheck........................2-12

TransportServiceCheck..........................2-14

DiagnosticAids .......................................3-1

EncoderSensorTest.................................3-2

InitializeErrorLog....................................3-3

Paper Sensor Test ...................................3-4

ParallelPortTest ....................................3-5

PrintNVRAMContents................................3-6

TestPage..........................................3-7

4090-001

RepairInformation......................................4-1

Handling ESD-Sensitive Parts .......................... 4-1

Adjustments........................................ 4-2

RemovalProcedures................................. 4-2

ReleasingPlasticLatches.......................... 4-2

BaseAssemblyRemoval........................... 4-3

CarrierBeltRemoval.............................. 4-3

CarrierFrameAssemblyRemoval ................... 4-4

CarrierTransportMotorRemoval.................... 4-5

Code Module Removal . . .......................... 4-6

Edge Guide Asm and Paper Load Shaft Removal ....... 4-6

EncoderCardRemoval............................ 4-6

EncoderStripRemoval............................ 4-6

ExitDriveBeltRemoval............................ 4-7

ExitRollerRemoval............................... 4-7

FeedArmAssemblyRemoval....................... 4-7

FrontCoverRemoval ............................. 4-8

GutterPadRemoval.............................. 4-8

InsideIdlerGearsRemoval......................... 4-9

LargeFeedRollRemoval......................... 4-10

LargeOutsideGearRemoval...................... 4-11

LeftSideFrameAssemblyRemoval................. 4-12

Maintenance Station Assembly Removal ............. 4-13

Maintenance Wipers and Caps Removal ............. 4-13

Manual Insert Tray Removal ....................... 4-13

MidFrameAssemblyRemoval..................... 4-13

Paper Feed Motor Removal ....................... 4-14

Paper Guide and EOF Flag Assembly Removal. ....... 4-14

Paper Load Door Removal ........................ 4-16

Pick Roll Hub, Shaft and Envelope Bucklers Removal . . . 4-16

Power Supply Removal. . ......................... 4-16

Printhead Cable, Cradle & Paper Deflector Removal .... 4-17

Printhead Carrier Assembly Removal ................ 4-19

Printhead Rubber Backer Removal. . ................ 4-19

RearCoverRemoval............................. 4-20

RightSideFrameAssemblyRemoval................ 4-20

Small Feed Roll Shaft, Rollers & Paper Flap Removal . . . 4-21

StarRollerRemoval ............................. 4-21

SystemBoardRemoval........................... 4-21

ConnectorLocations....................................5-1

SystemBoardConnectors............................. 5-2

EncoderCardConnector........................... 5-3

4090-001

PreventiveMaintenance ................................6-1

Lubrication Specifications. . ............................6-1

PartsCatalog .........................................7-1

HowToUseThisPartsCatalog.........................7-1

Assembly1:Covers..................................7-2

Assembly2:Frames..................................7-4

Assembly 3: Paper Feed . . ............................7-6

Assembly4:Electronics...............................7-8

Assembly5:Carrier.................................7-12

Assembly6:CarrierTransport.........................7-14

Assembly 7: Sheet Feeder . ...........................7-16

Assembly 8: Maintenance Station ......................7-18

Index ..................................................1

4090-001

Preface 2

This manual is divided into the following chapters:

1. General Information contains a general description of the

printer and the maintenance approach used to repair it. Special

tools and test equipment are listed in this chapter, as well as

general environmental and safety instructions.

2. Diagnostic Information contains error indicator table, symptom

table, and service checks used to isolate failing field replaceable

units (FRUs).

3. Diagnostic Aids contains tests and checks used to locate or

repeat symptoms of printer problems.

4. Repair Information provides instructions for making printer

adjustments and removing and installing FRUs.

5. Connector Locations uses illustrations to identify the connector

locations and test points on the printer.

6. Preventive Maintenance contains the lubrication specifications

and recommendations to prevent problems.

7. Parts Catalog contains illustrations and part numbers for indi-

vidual FRUs.

Safety Information

•The maintenance information for this product has been

prepared for use by a professional service person and is not

intended to be used by others.

•There may be an increased risk of electric shock and

personal injury during disassembly and servicing of this

product. Professional service personnel should understand

this and take necessary precautions.

•The safety features of some parts may not always be

obvious. Therefore, replacement parts must have the

identical or equivalent characteristics as the original parts.

4090-001

Preface vii

Sicherheitshinweise

•Die Wartungsinformationen für dieses Produkt wurden zur

Verwendung durch einen Wartungsfachmann entwickelt und

sollten nicht von anderen benützt werden.

•Zusätzliches Risiko eines elektrischen Schlags und

körperlicher Verletzung existiert während des

Auseinandernehmens und der Wartung des Geräts.

Fachpersonal sollte im vollen Verständnis der Lage

entsprechende Vorsichtsmaßnahmen ergreifen.

•Ersatzteile müssen gleiche oder gleichwertige Merkmale wie

die Originalteile aufweisen, da Sicherheitsvorkehrungen nicht

immer offensichtlich sind.

Consignes de Sécurité

•Les consignes d'entretien et de réparation de ce produit

s'adressent uniquement à un personnel de maintenance

qualifié.

•Le démontage et l'entretien de ce produit pouvant présenter

certains risques électriques, le personnel d'entretien qualifié

devra prendre toutes les précautions nécessaires.

•Les normes de sécurité de certaines pièces n'étant pas

toujours explicites, les pièces de rechange doivent être

identiques ou conformes aux caractéristiques des pièces

d'origine.

Norme di sicurezza

•Le informazioni riguardanti la manutenzione di questo

prodotto sono indirizzate soltanto al personale

dell'assistenza autorizzato.

•Durante lo smontaggio e il manutenzionamento di questo

prodotto, è possibile il rischio accresciuto di scosse elettriche

e danni personali. Il personale di assistenza autorizzato,

consapevole di ciò, deve adottare le precauzioni necessarie.

•È possibile che le funzioni di sicurezza di alcuni elementi non

siano così ovvie, quindi, i pezzi di ricambio devono avere

caratteristiche identiche o equivalenti a quelle dei pezzi

originali.

4090-001

viii

Pautas de Seguridad

•La información sobre el mantenimiento de este producto fue

escrita para el personal de mantenimiento cualificado y no

para cualquier otro usuario.

•Existen mayores riesgos de descargas eléctricas y daños

personales durante el desmontaje y la reparación de la

máquina. El personal cualificado comprende esto y toma las

precauciones necesarias.

•Los dispositivos de seguridad de algunas partes quizá no

siempre puedan ser reconocidas a simple vista. Por lo tanto,

las partes de reemplazo deben poseer características

idénticas o equivalentes a las partes originales.

Sikkerhedsoplysninger

•Oplysningerne om vedligeholdelse af dette produkt er

forberedt med henblik på professionelt servicepersonale, og

bør derfor ikke benyttes af andre.

•Risikoen for elektrisk stød øges under demontering og

service af dette produkt, hvorfor der bør tages de nødvendige

forholdsregler.

•Sikkerhedsforanstaltningerne er ikke altid lige åpenbare for

alle reservedele. Der bør derfor kun anvendes originale

reservedele eller reservedele med samme egenskaber som

de oprindelige.

Informações de Segurança

•As informações de segurança relativas a este produto

destinam-se a profissionais destes serviços e não devem ser

utilizadas por outras pessoas.

•Risco de choques eléctricos e ferimentos graves durante a

desmontagem e manutenção deste produto. Os profissionais

destes serviços devem estar avisados deste facto e tomar os

cuidados necessários.

•Os dispositivos de segurança de algumas peças poderão

não ser sempre suficientemente evidentes. Assim, as peças

sobressalentes devem possuir características idênticas ou

equivalentes às peças originais.

4090-001

Preface ix

Chinese Safety Information

Korean Safety Information

General Information 1-1

4090-001

1. General Information

The Color JetprinterTM 2070 (4090-001) printer is a personal, near

laser-quality inkjet printer. The print cartridge contains single-unit

customer-replaceable supply items. Dual printheads provide color

and true black printing without changing printheads. The black

cartridge has a total of 104 nozzles and installs on the left. The color

cartridge has a total of 96 nozzles and installs on the right. The

printer is capable of printing in two directions from either cartridge.

Resolution and Print Speed

Power Consumption

•Less than 2 Watts - power off and power to the printer

•7.5 Watts - Idle Mode (power on - not printing)

•12 Watts - Printing (average)

•25 Watts - Printing (peak)

Maintenance Approach

The diagnostic information in this manual leads you to the correct

field replaceable unit (FRU) or part. Use the error indicator charts,

symptom index, service checks, and diagnostic aids to determine

the symptom and repair the failure. Begin with “Start” on page 2-1.

This printer can be serviced without being connected to a host

computer. The user is directed, in the Printer Control program, to

perform the head to head and bidirectional alignment adjustments

after replacing a print cartridge.

Color Black

600 X 300 dpi

600 X 600 (using special paper) 600 X 300 dpi

600 X 600 (using special paper)

167 cps - Letter Quality

300 cps - Draft 230 cps - Letter Quality

300 cps - Draft

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lexmark Drucker Handbücher

Lexmark

Lexmark C 540n Bedienungsanleitung

Lexmark

Lexmark C544DTN - Color Laser Printer 25/25 Ppm Duplex Networkfront... Bedienungsanleitung

Lexmark

Lexmark E 330 Betriebsanleitung

Lexmark

Lexmark E210 Bedienungsanleitung

Lexmark

Lexmark C 752 Bedienungsanleitung

Lexmark

Lexmark 22N5000 Bedienungsanleitung

Lexmark

Lexmark OfficeEdge Pro4000c Bedienungsanleitung

Lexmark

Lexmark T520n Bedienungsanleitung

Lexmark

Lexmark MX71X Bedienungsanleitung

Lexmark

Lexmark Color Jetprinter 810 Series Bedienungsanleitung

Lexmark

Lexmark CS510 Series Bedienungsanleitung

Lexmark

Lexmark Optra Optra T Service-Handbuch

Lexmark

Lexmark T420 Service-Handbuch

Lexmark

Lexmark T64x Kurzanleitung

Lexmark

Lexmark MX6500e 6500e Service-Handbuch

Lexmark

Lexmark C4342 Bedienungsanleitung

Lexmark

Lexmark Color Jetprinter Z42 Bedienungsanleitung

Lexmark

Lexmark W850dn Bedienungsanleitung

Lexmark

Lexmark T63x Bedienungsanleitung

Lexmark

Lexmark E340 Bedienungsanleitung

Lexmark

Lexmark PRO700 Bedienungsanleitung

Lexmark

Lexmark CS310n Gebrauchs- und Pflegehandbuch

Lexmark

Lexmark 3000 Color Jetprinter Bedienungsanleitung

Lexmark

Lexmark C543dn Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung