LG RESU 10H DLT Bedienungsanleitung

9.8kWh Battery Pack Product Manual

Note.

The information included in this manual is accurate at the time of publication.

However, this manual is subject to change without prior notice. In addition, the illustrations in this

manual are meant only to help explain system configuration concepts and installation instructions.

Please note the image shown is for illustration purposes only.

Table of Contents

1. Safety

1.1 Symbols

1.2 Safety Instructions

1.2.1 General Safety Precautions

1.2.2 Battery Handling Guide

1.2.3 Response to Emergency Situations

1.3 Warning label

1.4 Qualified Personnel

2. Product Introduction

2.1 Technical data

2.2 Basic features/applications

2.3 Protection

2.4 Warehouse Storage Instructions

2.4.1 Packaging Specification

2.4.2 Storage

2.4.3 Handling

3. Installation

3.1 Mechanical requirements

3.1.1 Packaging and Open out equipment

3.1.2 Package items

3.1.3 Installation locations

3.1.4 Clearances

3.1.5 Tools & Safety gears required

3.1.6 Mounting Bracket

3.1.7 Appearance and Dimension

3.1.8 System clearances

3.1.9 Installing the Battery Pack

3.2 Electrical requirements

3.2.1 Spring Terminal blocks –RESU10HDLT

3.2.2 Power (wire AWG, Max length, Pinning) –RESU10HDLT

3.2.3 Communication (wire AWG, Max length, Pinning) –RESU10HDLT

3.2.8 Grounding (EGC-Equipment Grounding Connection) TBD

Table of Contents

4. Commissioning

5. Functionality

5.1 Powering up the system –RESU10HDLT

5.2 Shutting off the system –RESU10HDLT

5.3 Emergency procedure

5.3.1 Fire

5.3.2 Damaged Batteries

6. Troubleshooting & Maintenance

6.1 List of Alarm/Warning codes with definitions

6.2 List of Fault codes with definitions

6.3 Return/Replacement instructions

6.3.1 Uninstallation from the wall

6.3.2 Re-Packaging the pack

6.3.3 Return Address

4.1 LED Status

4.1.1 LED indicators

Symbols

Description

Caution, risk of electric shock

Do not place

nor install near flammable or explosive materials

Install the product out of reach from children

Read the instruction manual/booklet before starting installation

or operation

Heavy weight may incur serious injury to the back

Do not dispose the product with household wastes

Recyclable

Disconnect the equipment before carrying out for maintenance or

repair

Observe

precautions for handling electrostatic discharge

sensitive

devices

1. Safety

1.1 Symbols (TBD)

1. Safety

1.2 Safety Instructions

For safety reasons, installers are responsible for familiarizing themselves with

the contents of this document and all warnings before performing installation.

1.2.1 General Safety Precautions

Over-voltages or wrong wiring can damage the Battery Pack and cause

deflagration, which can be extremely dangerous.

Avoid installing the Battery Pack where flammable materials are stored.

Do not install in places where explosive gas or chemicals are present.

The utility grid, solar input, and battery voltage must be disconnected

from the Battery Pack before wiring. Wiring must be carried out by a

Qualified personnel. Battery Pack is not user serviceable. High voltage is

present in the device.

The electronics inside the Battery Pack are vulnerable to electrostatic

discharge.

Be sure to be grounded before handling the Battery Pack.

Read the label with Warning Symbols and Precautions, which is visibly

under to the Battery Cover (see Section 1.3)

1.2.2 Battery Handling Guide

Do not expose battery to temperature over 50℃ and open flame.

Do not damage the unit in such ways as dropping, deforming, impacting,

cutting or penetrating with a sharp object. It may cause a leakage of

electrolyte or fire.

Do not connect anode and cathode terminal block opposite direction.

Do not charge or discharge damaged battery.

Do not place any foreign objects on the top of the Battery Pack and on the

cooling fin.

Do not put the battery pack upside down on the ground.

Do not disconnect, disassemble or repair by an unqualified personnel.

Services must be made by qualified personnel only.

1. Safety

All types of breakdown of the product may lead to a leakage of

electrolyte or flammable gas.

Do not place the product nearby flammables. It may lead to fire or

explosion in case of accident.

Keep out of reach of children or animals.

Keep the product away from direct liquid. Do not touch or use if liquid is

spilled on the product.

Store at cool and dry place.

(Do not storage place : Storage are for hay, straw, chaff, animal feed,

fertilizers, vegetables or fruit products, greenhouse)

Only use the product with a LGC-authorized inverter.

Do not connect any AC conductors or Photo-voltaic conductors directly

to the battery pack and should be only connected to the Inverter

Make sure not to accumulate snow over the battery pack or submerge

battery pack in liquids.

Do not expose or place near water sources like downspouts or sprinklers

If the battery pack is installed in the garage then ensure the product is

above the height of the vehicle bumper.

Ensure proper care is taken to keep off any foreign object on top of the

battery pack

The RESU battery pack has been certified IP55 and can be installed

indoors as well as outdoors. However, if installed outdoors, do not allow

the battery pack to be exposed to direct sunlight and water source as it

may cause :

Power limitation phenomena in the battery

(with a resulting decreased energy production by the system)

Premature wear of the electrical/electromechanical components and

mechanical components (gaskets)

Reduction in performance, lifetime and possible damage of the battery

1.2.3 Response to Emergency Situations

If a user is exposed to internal materials of the battery cell due to

damage on the outer casing, the following actions are recommended.

Inhalation: Leave the contaminated area immediately and seek medical

attention.

Eye contact: Rinse eyes with water for 15 minutes and seek medical

attention.

Contact with skin: Wash the contacted area with soap thoroughly and

seek medical attention.

Ingestion: Induce vomiting and seek medical attention.

Fire Extinguishing Media

Respirator is not required during normal operations. Use of SCBA is

required in the event of fire.

Use FM-200®or CO2 extinguisher for battery fire.

Use an ABC fire extinguisher, if the fire is not from battery and not

spread to it yet.

Fire Fighting Instructions

If fire occurs during charging batteries, shut off the power to charger

(Shut off the circuit breaker).

When batteries are heated above 150°C, there may be a possible

explosion.

Fire Fighting Equipment

Use Personal Protective Equipment Directive (89/686/EEC) complied

full-face SCBA (Self-Contained Breathing Apparatus) with full

protective gear. Hazardous fumes including carbon monoxide, carbon

dioxide, and/or various hydrocarbons can be generated during a fire.

Effective ways to deal with Accidents:

On land : Place damaged battery into a segregated place and call local

fire department or service engineer.

In water : If battery is submerged, stay out of water. If battery is yet

submerged and it is safe to do so, switch off DC circuit breaker on the

battery. Do not use submerged battery again and contact the service

engineer.

1. Safety

1.4 Qualified Personnel

1.3 Warning label (TBD)

Warning labels and other relevant labels are attached to the inside of the battery

pack.

This guide and the tasks and procedures described herein are intended for use by

skilled workers only. A skilled worker is defined as a trained and qualified

electrician or installer who has all of the following skills and experience:

•Knowledge of the functional principles and operation of on-grid and off-grid

(backup) systems.

•Knowledge of the dangers and risks associated with installing and using

electrical devices and acceptable mitigation methods.

•Knowledge of the installation of electrical devices

•Knowledge of and adherence to this guide and all safety precautions and best

practices.

2.1 Technical Data

2. Product Introduction

2.1.1 Dimensions and weight

RESU 10H DLT

P/N

EVESPBO0100A0

Width

744 mm (29.3”)

Height

907 mm (35.7”)

Depth

206 mm (8.1”)

Weight

1) 97kg (214lbs)

1) A battery pack’s weight varies slightly depending on its battery cells’ weight.

907

744

206

RESU 10H

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LG Batteriepack Handbücher

LG HBP 16H Bedienungsanleitung

LG ESS Home 8 Bedienungsanleitung

LG RESU3.3 Bedienungsanleitung

LG BLGRESU7H Bedienungsanleitung

LG BPEL04KAB-E Bedienungsanleitung

LG RESU16H Prime Bedienungsanleitung

LG RESU FLEX Bedienungsanleitung

LG BLGRESU10HP Bedienungsanleitung

LG D005KD1N111 Bedienungsanleitung

LG ESS Home 10 Bedienungsanleitung

LG BP4 Bedienungsanleitung

Beliebte Batteriepack Handbücher anderer Marken

Acumentrics

Acumentrics PACK-POWER SYSTEM Bedienungsanleitung

ACDC Dynamics

ACDC Dynamics SPF12-50 Bedienungsanleitung

Aegis

Aegis ABL-72020P Bedienungsanleitung

Dyness

Dyness TowerESS Bedienungsanleitung

Growatt

Growatt APX 5.0P-S0-US Bedienungsanleitung

EGO

EGO BAX1300 Bedienungsanleitung

CyberPower

CyberPower BCA Series Bedienungsanleitung

Intermec

Intermec 700 Series Bedienungsanleitung

Dometic

Dometic PLB40 Bedienungsanleitung

V-TAC

V-TAC VT-48280-W2 Bedienungsanleitung

Valence

Valence RT Bedienungsanleitung

Nikon

Nikon MB-D14 Bedienungsanleitung

IOGear

IOGear GBP24V Series Bedienungsanleitung

Inventus Power

Inventus Power PROTRXion S-12V100-TRX-HD Bedienungsanleitung

Clas Ohlson

Clas Ohlson PW-290A Bedienungsanleitung

EINHELL

EINHELL MULTI-Ah Power X-Change Plus Bedienungsanleitung

Samsung

Samsung EB-U3300 Bedienungsanleitung

ECTIVE

ECTIVE LC Series Bedienungsanleitung