LG MyTouch Q Handbuch

LGC800F Operator’s Guide

February 26, 1999

Terminal Research Institute Software Development Sector

Chan-yong Park

Terminal Development Center

LGIC

Call Status Functions

1.Memo (Menu Soft Key 1 + 1)

Function to store a telephone number while calling

lSelect Menu + 1and enter the telephone number to store.

lPress Store (Soft Key 2) key. (Name is not stored)

2.Record While Calling (Menu Soft Key 1 + 2)

Function to record the conversation while calling

3.MIC Volume Control (Menu Soft Key 1 + 2)

Function to control the sensitivity of MIC while calling

lYou can select ‘High’or ‘Low’

4.Fault Man Ring Back Feature (Menu Soft Key 1 + 4)

Function to transmit her/his own number while calling

lYou can transmit your own number while calling by pressing menu Soft Key 1 + 4.

5.Volume Control (Soft Key2)

Function to control the volume while calling

lYou can control the volume by pressing Soft Key 2.

Select the volume using the next setup key (Soft Key 1)

6.Mute Feature (DEL key)

Function to mute the speech voice while calling

lIf you press DEL key, the speech tone is muted immediately.

If you want to deactivate this mute function, press DEL key again.

Terminal Development Center

LGIC

Stand-by Status Menu Set-up and Its Functions

1. Cion Secretary [Menu + 1]

Telephone Directory / Scheduler / Alarm / Call Reserve / World Time

1.1 Contact Secretary [Menu +1 + 1 ]

1.1.1Telephone Directory Register [Menu +1+1+ 1 ]

1.1.2Telephone Directory Search [Menu +1+1+ 2 ]

1.1.3Telephone Directory Delete [Menu +1+1+ 3 ]

-See the manual on the telephone directory function.

1.2 Schedule Management Secretary [Menu +1 + 2 ]

- See the manual on the diary function

1.3 Alarm Secretary [Menu +1 + 3 ]

Alarm Time

*User can set an alarm to the desired time.

lSelect Menu + 5+ 1.

lSelect one of ‘Release / Once / Daily’.

lIf you select ‘Release’, it becomes the state of stand-by. In case an alarm time was set previously,

that setting time will be deleted.

lWhen ‘Once / Daily’is selected, you just enter the alarm time in the order of hour and minute.

lIn case the alarm time has been set already, the set alarm time and the soft keys of EDIT/OK are

displayed.

- If you select EDIT here, the soft key 1 of EDIT is displayed in ‘AM’or ‘PM”mode for editing the

input.

l‘AM’and ‘PM’mode can be switched with Soft Key1[AM/PM]

lYou can edit the entered contents using DEL key.

lPress OK key to store the entered alarm time.

¢ÑNote: The alarm bell is triggered at the set alarm time with the message of “Alarming Now”

displayed on the display.

¢ÑNote: In case ‘Once’is selected, if the END key is pressed or 1minute is passed, the alarm time is

deleted.

Terminal Development Center

LGIC

1.4 Call Reservation Secretary [Menu + 1 + 4 ]

Call Reserve

*Function to originate a call to the reserved number automatically at the reserved time.

lSelect Menu + 5+ 2.

lEnter the reservation time in the order of “Hour :Minute”.

l‘AM’and ’PM’mode can be switched with Soft Key 1[AM/PM].

lPress OK key to store the entered reserved call time.

lEnter the reservation telephone number.[Up to 32 characters acceptable]

lStore the entered telephone number using STORE key.

¢ÑNote: Telephone rings at the reserved time with the message of “Time for Reserved Call”on the

display.

¢ÑNote:If the END key is pressed or one minute is passed, the reserved call time is automatically

deleted and stored in the last call list.

1.5 World Time Secretary [Menu +1 + 4]

World Time

*Function to confirm the standard time of major cities in the world based on GPC time.

This function is available in CDMA mode only.

lSelect Menu + 5+ 3.

lSelect the city you want to check using ‘Soft Key1’or ‘V/#’key and press OK key.

Then, the international standard time of the selected city is appeared.

¢ÑCities applicable

Guam / New York / Dacca / Dallas / Denver / Delhi / Tokyo / Detroit / London / Rome / Los Angeles /

Lisbon / Riode Janeiro / Manila / Madrid / Mexico / Moscow / Montreal / Bangkok / Berlin / Beijing /

Beirut / Boston / Buenos Aires / Vienna / Sydney / Seattle / Chicago / Singapore / Athens / Abu Dhabi /

Ajoles / Amsterdam / Anchorage / Oakland / Washington / Jakarta / Jedda / Kabul / Cairo / Caracas /

Colombo / Kuwait / Taipei / Tehran / Paris / Hanoi / Helshinki / Honolulu / Hongkong

2.Volume Control [Menu + 1]

Function to control Ring /Key Tone /Call Volume

2.1 Receiver Volume Control [4-step +Mute]

lSelect Menu + 1 + 1.

Terminal Development Center

LGIC

lSelect the volume using the next setup key (Soft Key 1).

lSelect the volume you want using V/#keys.

lStore the selected volume using the selection key.

2.2 Key Tone Volume Control [4-step +Mute]

lSelect Menu + 1 + 2.

lSelect the volume using the next setup key (Soft Key 1).

lSelect the volume you want using V/#key.

lStore the selected volume using the selection key.

2.3 Volume Control [8-step + Low]

lSelect Menu + 1 + 3.

lSelect the volume using the next setup key (Soft Key 1).

lSelect the volume you want using V/#key.

lStore the selected volume using the selection key.

3. Bell Selection [Menu +2 ]

Function to select the bell type for the incoming call.

3.1 Types of Bell [Ring / Vibration / Vibration + Ring]

lSelect Menu + 2+ 1.

lSelect the bell type using the next setup key (Soft Key 1).

lSelect the type of bell you want using V/#key.

lStore the selected status using the selection key.

3.2 Bell Selection (17 types)

[General / Sound of glass bead / Kung-tha-ri Shabara / Rise tone / Alarm tone / Chime bell / Code

tone / Tune of Japanese apricot tree / Pathetic sonata / Bolero of love/ Tune of bird / Father’s

face / Small fountain / Edelweiss / A happy home / Nostalgia / Mail carriage]

lSelect Menu + 2+ 2

lSelect the type of bell using the next setup key (Soft Key 1).

lSelect the bell you want using V/#key.

lStore the selected status using the selection key.

Terminal Development Center

LGIC

4. Call Time [Menu + 4]

Function to verify the record on the call time

4.1 Last Call Time

*Function to show the last call time

lSelect Menu + 4+ 1.

lPress OK key to return to the stand-by state.

4.2 Total Call Time

*Function to show the number of call and the call time for all calls of receiving and transmitting.

User can verify the total number of calls made and the call time through this function.

lSelect Menu + 4+ 2.

lIf you select OK key (Soft Key2), it returns to the stand-by status and if you select DEL key (Soft

Key1), you can delete the accumulated total call time.

4.3Originating Call Time

*Function to show the number of call and the call time for the originated calls.

User can verify the number of calls she/he originated and the call time through this function.

lSelect Menu + 4+ 3.

lIf you select OK key (Soft Key2), it returns to the stand-by status and if you select DEL key (Soft

Key1), you can delete the accumulated total call time.

5. Secret Function [Menu + 6 + Password 4-digit]

Lock mode setup / Call list delete / Private information delete / Voice list delete /

Emergency phone number store / Password change / International call restrict /

Automatic PIN transmit / Software version confirm functions can be performed in this menu.

5.1. Lock Mode

*Function to restrict the originating and storing functions.

*You can select ‘Release / Power-On / Always’

lPress Menu + 6+ Password 4-digit + 1

lSelect one of ‘Release / Power-On / Always’using ‘Soft Key1’or ‘V/#’key and press the store

key.

lIf you select ‘Always’, the phone falls in the lock mode always, and [Select] menu and the calling

are locked.

Terminal Development Center

LGIC

-If you try to call in this case, you are prompted for the password and if the entered password is

identified, the call is established. In the lock mode, if you press [Locking Release] button, the

locking on the [Select] key is released and the [Locking Release] button is changed to [Select]

button.

-Even in this case, whenever you try to call, the password is required.

-If you want the locking release, you should release this setup from the [Menu].

lIf you select ‘Power-On’, the locking function is not immediately executed but when the phone is

switched on, it is automatically set to the lock mode and at the same time, the soft key is changed

to [Menu], [Locking Release].

¢ÑDefault password is ‘0000’.

5.2. Call List Delete

*Function to delete all the telephone numbers stored in the last call list.

lSelect Menu + 6 + Password 4-digit + 2

lSelect ‘Yes’from Yes/No using the next setup key (Soft Key1) or ‘V/#’key and press the

SELECT key.

5.3. Private Information Delete

*Function to delete all the contents stored in the memory address 01 ~ 200.

lSelect Menu + 6 + Password 4-digit + 3.

lSelect ‘Yes’from Yes/No using the next setup key (Soft Key1) or ‘V/#’key and press the

SELECT key.

¢ÑDuring the deletion, a message of ‘Please, wait’appears and after the completion of the deletion

it returns to the stand-by status.

5.4 Voice List Delete

*Function to delete all the voice items (20 entities) from the memory addresses where voice is

stored of memory address 01 ~ 200.

lSelect Menu +5+ Password 4-digit + 4.

lSelect ‘Yes’from Yes/No using the next setup key (Soft Key1) or ‘V/#’key and press the

STORE key.

5.5. Emergency Phone Number Store

*Function used to enter the emergency telephone number [Up to 3 numbers ]

Terminal Development Center

LGIC

lSelect Menu + 6 + Password 4-digit + 5.

If the telephone number stored in the telephone number 1is appeared empty, a message of

‘None’appears.

lSelect the memory address where you want to make input using the next setup key (Soft Key1) or

‘V/#’key [ 1 ~ 3 ]

lSelect the edit mode by pressing EDIT key.

lEnter the telephone to store and press OK key.

If you want to terminate the process at this time, press the END key and if you want to enter the

telephone in other memory address, repeat the procedures that follow the step of memory address

selection.

5.6.Password Change

*Function to change the password

lSelect Menu + 6 + Password 4-digit + 6.

lEnter a new password of 4-digit and press STORE key.

lFor the reconfirmation, enter the password you entered just before in 4-digit.

lPress OK key. [It is then back to the previous status]

5.7. International Call Restrict

*Function to restrict the originating for the international call

lSelect Menu + 6 + Password 4-digit + 7

lSelect ‘Setup’of ‘Setup/Release’using the next setup key (Soft Key1) or ‘V/#’key and press

STORE key.

¢ÑOnce the international call is restricted, the international call cannot be originated.

5.8. Automatic PIN Transmit

*Function to set up PIN CODE and store it.

lSelect ‘Setup’of ‘Setup/Release’using the next setup key (Soft Key1) or ‘V/#’key and press

STORE key.

¢ÑThis function is not used currently. (It is subject to change later by the service provider)

5.9. Software Version Confirm

*Function to confirm the software version of the phone.

lSelect Menu + 6 + Password 4-digit + 9.

¢ÑMSM Version / Self Source Version / Qualcomm Source Version are appeared.

Terminal Development Center

LGIC

6. Convenient Functions

Area code input/setup, automatic reception, calculator, voice recognition setup, automatic

answer functions can be set.

6.1 Automatic Area Code

*The stored area code is added to the dial number automatically while a call is originated.

lSelect Menu + 6+ 1.

lSelect one of ‘Setup/Release’using the next setup key (Soft Key1) or ‘V/#’key and press

STORE key.

lIf you select ‘Release’, it will be in the stand-by state. In case there is a pre-stored number, that

number will be deleted.

lPress SETUP to enter the area code. [Max. up to 4digits ]

lPress OK key to store the entered contents.

If the entered area code is not registered one, a message of ‘Wrong Number’appears with a

beep alarm and it returns to its initial stage.

6.2Automatic Reception

*If the user does not answer an incoming call, after the telephone rings as many times as the set

number of the bell for the automatic reception, call is established automatically.

lSelect Menu + 6+ 2

lSelect one of ‘Release / After 1st Ring / After 3rd Ring’using the next setup key (Soft Key1) or

‘V/#’key and press STORE key.

¢ÑIn case of melody, the incoming call is received after the 1st tune regardless of the setting

value.

6.3Calculator

*[Add / Subtract / Multiply / Divide] can be executed.

*You can enter the decimal point with [ V] key.

lSelect Menu + 6+ 3.

lEnter numbers. [9 digits can be entered including the decimal point]

lSelect operators using Soft Key1 key.

lEnter numbers. [9 digits can be entered including the decimal point]

lSelect [ = ] operator using Soft key1 key and press [OK] key. [9 digits including the decimal point

can be displayed]

Terminal Development Center

LGIC

If you want to make other operation on the operation result onward, press other operator than [ = ]

and press STORE key to make continuous operation.

If the operation result exceeds 9 digits including the decimal point, error message appears and it

returns to the initial status of the calculator.

6.4 Voice Recognition Setup [Menu +6 + 4]

*You can determine whether to use the voice recognition function or not.

lSelect Menu + 6+ 4.

lSelect ‘Setup’or ‘Release’using 3/4key or [SELECT] key.

lStore it using [SELECT] key.

¢ÑNote: When the voice recognition is set, press DEL key from the main screen to use the voice

recognition function.

6.5 Automatic Answer [Menu + 6 + 5]

*It is used for the setup of functions that are related with the automatic answering function.

¢ÑNote: If you are not in a position to answer a call, you can record the message of the counterpart

by answering the call automatically. See the description of the automatic answering for

more information.

6.6 Record While Calling [Menu + 6 + 6]

*Used to set up the sub menu that is related with the function of ‘Record While Calling’.

¢ÑNote: This is a function that allows you to record the conversation in the telephone while calling.

See the description of the function of ‘Record While Calling’for more information.

6.7 Hold Function [Menu + 6 + 7]

*Used to set up the sub menu that is related with the Hold function.

¢ÑNote: You can hold the call temporarily (max. 30 seconds) for a urgent matter and resume the

call pressing SEND key or opening the flip when you are again ready for the call.

See the description of hold function for more information.

7. Supplementary Functions [Menu + 7]

7.1 Background Illumination

*Function to control the time of the background illumination for keypad and LCD.

lSelect Menu + 7+ 1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Handy Handbücher anderer Marken

Zte

Zte BLADE A520 Bedienungsanleitung

Nokia

Nokia Lumia 620 Bedienungsanleitung

Blackbe;rry

Blackbe;rry KEYone Bedienungsanleitung

Bea-fon

Bea-fon X5 Premium Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 Series Bedienungsanleitung

Blackbe;rry

Blackbe;rry Storm Betriebsanleitung

LifeWatch

LifeWatch V Bedienungsanleitung

Bea-fon

Bea-fon SILVER LINE SL860 Bedienungsanleitung

IKI Mobile

IKI Mobile KF4.5i Bedienungsanleitung

Hitech

Hitech HT-850 Bedienungsanleitung

Yezz

Yezz Fashion F10 Bedienungsanleitung

Point Mobile

Point Mobile PM60 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Q10 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Bold 9900 Bedienungsanleitung

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung

ISAFE MOBILE

ISAFE MOBILE IS655.2 Bedienungsanleitung

Blackbe;rry

Blackbe;rry CURVE 8300 - SMARTPHONE Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 - VERSION 4.1 Bedienungsanleitung

LG myTouch Q Handbuch

Beliebte Handy Handbücher anderer Marken