LG M4210C-BH - - 42" LCD Flat Panel Display Bedienungsanleitung

Make sure to read the Important Precautions before using the product.

Keep the User's Guide(CD) in an accessible place for furture reference.

See the label attached on the product and give the information to your dealer when you ask

for service.

M4210C

User’s Guide

Safety Precautions

Please read these safety precautions carefully before using the product.

If you ignore the caution message, you may be slightly injured or the product may be damaged

If you ignore the warning message, you may be seriously injured or there is a possibility of

accident or death.

Warning

Caution

Precautions in installing the Product

Keep away from heat sources like electrical heaters.

- Electrical shock, fire, malfunction or deformation may occur.

Keep the packing anti-moisture material or vinyl packing out of the reach of children.

- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the

nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

Do not put heavy objects on the product or sit upon it.

- If the product collapses or is dropped, you may be injured. Children must pay particular attention.

Do not leave the power or signal cable unattended on the pathway.

- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.

Install the product in a neat and dry place.

- Dust or moisture can cause electrical shock, fire or product damage.

If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the

service center.

- If you continue to use without taking proper measures, electrical shock or fire can occur.

If you dropped the product or the case is broken, turn off the product and unplug the power cord.

- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service

center.

Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product

screen.

- It can cause injury to human, problem to product and damage the display.

Make sure the product ventilation hole is not blocked. Install the product in a suitably wide place (more

than 10cm from the wall)

- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.

Do not block the ventilation hole of the product by a tablecloth or curtain.

- The product can be deformed or fire can break out due to overheating inside the product.

Install the product on a flat and stable place that has no risk of dropping the product.

- If the product is dropped, you may be injured or the product may be broken.

Install the product where no EMI occurs.

Keep the product away from direct sunlight.

- The product can be damaged.

Warning

Caution

Safety Precautions

Electrical Power Related Precautions

Make sure to connect the power cable to the grounded current.

- You may be electrocuted or injured.

Use the rated voltage only.

- The product can be damaged, or you may be electrocuted.

In the presence of thunder and lightning, never touch the power cord and signal cable because it can be

very dangerous.

- It can cause electric shock.

Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet.

Use a power bar with a grounding terminal designed for exclusive use with the computer.

- A fire can break out due to overheating.

Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry

the power plug completely or wipe dust off.

- You may be electrocuted due to excess moisture.

If you don’t intend to use the product for a long time, unplug the power cable from the product.

- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.

Fix the power cable completely.

- If the power cable is not fixed completely, a fire can break out.

Hold the plug when pulling out the power cable. Do not bend the power cord with excessive force or put

heavy objects on the power cord.

- The power line can be damaged, which may cause electric shock or fire.

Do not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is

connected to the input terminal on the wall. Additionally, do not touch the power cable right after

plugging into the wall input terminal.

- You may be electrocuted.

The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily

accessible after installation.

Main power breaker is the power cord and this breaking device must be located at a location where it is easy

to operate.

Do not unplug the power cord while the product is in use.

- Electrical shock can damage the product.

Warning

Caution

Precautions in Moving the Product

Warning

Make sure to turn off the product.

- You may be electrocuted or the product can be damaged.

Make sure to remove all cables before moving the product.

- You may be electrocuted or the product can be damaged.

Safety Precautions

Caution

Precautions in Using the Product

Warning

Do not put or store inflammable substances near the product.

- There is a danger of explosion or fire due to careless handling of the inflammable substances.

When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent

scratching. Do not clean with a wet cloth.

- The water can sink into the product, which can cause electric shock or serious malfunction.

Take a rest from time to time to protect your vision.

Keep the product clean at all times.

Take a comfortable and natural position when working with a product to relax the muscles.

Take a regular break when working with a product for a long time.

Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make

a scratch on it.

Keep the proper distance from the product.

- Your vision may be impaired if you look at the product too closely.

Set the appropriate resolution and clock by referring to the User’s Guide.

- Your vision can be impaired.

Use authorized detergent only when cleaning the product. (Do not use benzene, thinner or alcohol.)

- Product can be deformed.

Caution

Do not shock the product when moving it.

- You may be electrocuted or the product can be damaged.

Do not dispose the product-packing box. Use it when you move.

Make the panel face forward and hold it with both hands to move.

- If you drop the product, the damaged product can cause electric shock or fire. Contact with the service center

for repair.

Do not disassemble, repair or modify the product at your own discretion.

- Fire or electric shock accident can occur.

- Contact the service center for check, calibration or repair.

When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent

scratching. Do not clean with a wet cloth.

Keep the product away from water.

- Fire or electric shock accident can occur.

The fluorescent lamp used in this product contains a small amount of mercury.

Do not dispose of this product with general household waste.

Disposal of this product must be carried out in accordance to the regulations of your local authority.

On Disposal

Using the Remote Control

•

Power On/Off Button

•

AV Button

•

Input Select Button

(See next page)

•

Sleep Button

When watching AV/S-Video/RGB/HDMI

•

Component1/ Component2

The product will be automatically turned off

after a certain period of time.

Press this button repetitively to select an

appropriate time duration

•

Menu Button

•

Exit Button

•

Auto Button

Automatic adjustment function

(Operational for the analog signal only)

•

Check Button

•

Video Operation Button

Applicable for LG products only

•

Volume Button

•

Mute button

Name of the Remote Control Buttons (A type)

There is not a function

which is supported

•

PSM Button

- Automatically adjusts the image.

Press this button repetitively to set

the intended screen.

•

Up and Down buttons

Bring up and down direction adjustment.

•

ARC button

To select the image

size of the screen.

If you press the button once,

the following Input Signal

Window will appear. Select

the signal type you want

using the button.

•

Input Select Button

Input

AV Component1

Component2 RGB

HDMI/DVI

•

AV Button

Using the Remote Control

Each time you press the Input

button it will change to

1. Take out the battery cap.

2. Insert the batteries with correct polarity (+/-).

3. Close the battery cap.

• Dispose of used batteries in the recycle bin to prevent

environmental pollution.

Inserting batteries into remote control.

Using the Remote Control

Name of the Remote Control Buttons( B type)

1 2 3

4 5 6

7 8

•

AV Button

•

Sleep Button

When watching AV/S-Video/RGB/HDMI

Component1/ Component2

The product will be automatically turned

off after a certain period of time.

Press this button repetitively to

select an appropriate time duration

•

PSM Button

- Automatically adjusts the image.

Press this button repetitively to set

the intended screen.

•

Menu Button

•

Check Button

•

Volume Button

•

Mute button

There is not a function

which is supported

•

UP and Down buttons

Bring up and down direction

adjustment.

•

ARC button

To select the image size of the

screen.

•

Auto Button

Automatic adjustment function

(Operational for the analog signal only)

•

Exit Button

There is not a function

which is supported

There is not a function

which is supported

There is not a function

which is supported

•

Power On/Off Button

•

Input Select Button

(See next page)

Using the Remote Control

Input

AV Component1

Component2 RGB

HDMI/DVI

•

AV Button

Each time you press the Input

button it will change to

1 2 3

4 5 6

7 8

If you press the button once,

the following Input Signal

Window will appear. Select

the signal type you want

using the button.

•

Input Select Button

1. Take out the battery cap.

2. Insert the batteries with correct polarity (+/-).

3. Close the battery cap.

• Dispose of used batteries in the recycle bin to prevent

environmental pollution.

Inserting batteries into remote control.

Connecting the Speakers

Mount the product onto the speaker by using a screw as shown in the following

picture, and then connect the speaker cable.

* Applicable only for models that support the speakers

When the speaker is installed.

Name and Function of the Parts

Rear View

Power Connector : Connect the power cord

Wired Remote Control Port

RS-232C Serial Ports

RGB, HDMI/DVI Ports

PC Sound Jack

: Connect the audio cable to the *LINE OUT jack of the PC sound card.

AV Ports

OUT

VIDEO

L-AUDIO-R

VIDEO

RGB IN

RGB OUT

HDMI/DVI IN

L-AUDIO-R

COMPONENT IN

OUT

AV IN

REMOTE

CONTROL IN

RS-232C

(CONTROL&

SERVICE)

AUDIO

(RGB/DVI)

S-VIDEO

*LINE OUT

A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that

the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of

PC sound card has only Speaker Out, reduce the PC volume.

If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out using

the card jumper of the program (Refer to the Sound Card Manual).

OUT

VIDEO

L-AUDIO-R

VIDEO

RGB IN

RGB OUT

HDMI/DVI IN

L-AUDIO-R

COMPONENT IN

OUT

AV IN

REMOTE

CONTROL IN

RS-232C

(CONTROL&

SERVICE)

AUDIO

(RGB/DVI)

S-VIDEO

* The product image in the user’s guide could be different from the actual image.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LG Flachbildfernseher Handbücher

LG M5500C-BA - - 55" LCD Flat Panel Display Bedienungsanleitung

LG M1910A Bedienungsanleitung

LG 42LM6700 Bedienungsanleitung

LG 42LM3700 Montageanleitung

LG 47LM4600 Montageanleitung

LG M4201C-BA - - 42" LCD Flat Panel Display Bedienungsanleitung

LG 47LX9500 Bedienungsanleitung

LG 55GA6400 Bedienungsanleitung

LG Flatron L4200A Bedienungsanleitung

LG L172WT - - 17" LCD TV Bedienungsanleitung

LG 55EA9800 Bedienungsanleitung

LG 47LX9500 Bedienungsanleitung

LG Flatron W2053TQ Bedienungsanleitung

LG 37LG60 Series Bedienungsanleitung

LG 20LH1DC1 Bedienungsanleitung

LG 47LS4500 Montageanleitung

LG 60LS5750 Bedienungsanleitung

LG 42LM3700 Bedienungsanleitung

LG 55GA7900 Bedienungsanleitung

LG Audio visual Bedienungsanleitung

LG 55LM4600 Montageanleitung

LG 55LM4700 Montageanleitung

LG M5201Cs Bedienungsanleitung

LG 32LK335C Bedienungsanleitung

Beliebte Flachbildfernseher Handbücher anderer Marken

Samsung

Samsung LT-P326W Bedienungsanleitung

Philips

Philips 32PFL7602D - annexe 1 Bedienungsanleitung

Samsung

Samsung LNR1550X Bedienungsanleitung

Sanyo

Sanyo FVM4212 Bedienungsanleitung

Philips

Philips 47PFL7623D Bedienungsanleitung

JVC

JVC LT-32Z48 Bedienungsanleitung

Sony

Sony KE-42XBR900 - 42" Xbr Plasma Wega™ Integrated... Gebrauchsanweisung

Vizio

Vizio M190MV Gebrauchs- und Pflegehandbuch

Philips

Philips Brilliance 298X4 Bedienungsanleitung

Samsung

Samsung UN55F7050AF Bedienungsanleitung

Philips

Philips 1EMN26039A Bedienungsanleitung

RCA

RCA TruFlat F20TF30 Bedienungsanleitung

Samsung

Samsung LW32A33W Kurzanleitung

Philips

Philips 37PF5520D Bedienungsanleitung

Sony

Sony FD Trinitron Wega KV-30HS420 Bedienungsanleitung

Philips

Philips 32PFL7782D Bedienungsanleitung

Sanyo

Sanyo CA21KS2 Bedienungsanleitung

Samsung

Samsung PN50A550S1F Bedienungsanleitung