LG 27BQ70QC Bedienungsanleitung
2
ENGLISH
TABLE OF CONTENTS
LICENSE ............................................................................................. 3
OPEN SOURCE SOFTWARE NOTICE INFORMATION ............................ 4
ASSEMBLING AND PREPARING ......................................................... 4
USING THE MONITOR....................................................................... 13
USER SETTINGS ............................................................................... 16
TROUBLESHOOTING ........................................................................ 21
PRODUCT SPECIFICATION................................................................ 22
3
ENGLISH
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
*
4
ENGLISH
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code that is contained in this product, under GPL, LGPL, MPL, and other open source
licenses that have the obligation to disclose source code, and to access all referred license terms, copyright
notices and other relevant documents, please visit https://opensource.lge.com.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping, and handling) upon email request toopensource@lge.
com.
This offer is valid to anyone in receipt of this information for a period of three yearsafter our last shipment of
this product.
ASSEMBLING AND PREPARING
CAUTION
•Always use genuine LG components to ensure safety and product performance.
•The product warranty will not cover damage or injury caused by the use of unauthorised components.
•It is recommended that use the supplied components.
•Illustrations in this document represent typical procedures, so they may look different from the actual
product.
•Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product.
(Doing so may damage the product.)
•Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
•When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen
may cause damage to it.
5
ENGLISH
NOTE
•The components may look different from those illustrated here.
•Without prior notice, all product information and specifications contained in this manual are subject to
change to improve the performance of the product.
•To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer
from which you purchased the product.
•The power cord provided may differ depending upon the region.
Supported Software
You can download and install the latest version from the LGE website (www.lg.com).
•Monitor Driver/ OnScreen Control/ Dual Controller
Product and Button Description
Button Description
(Power) Power off state Press the button once to turn on the monitor.
Power on state Press and hold the button once for five seconds or longer
to turn off the monitor.
(Menu) Press the button once to set the screen.
/ Adjusts the volume.
Displays information about the current input.
6
ENGLISH
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or
damaged and to ensure safe transportation, regardless of its shape or size.
•Place the monitor in the original box or packing material before attempting to move it.
•Before moving or lifting the monitor, disconnect the power cord and all other cables.
•Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
•When holding the monitor, the screen should face away from you to prevent it from being scratched.
•When transporting the monitor, do not expose the monitor to shock or excessive vibration.
•When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.
CAUTION
•Avoid touching the monitor screen as much as possible.
-This may result in damage to the screen or some of the pixels used to create images.
7
ENGLISH
Installing on a Table
After folding the stand to secure it, lift the monitor and place it on the table in an upright position.
A-Type
CAUTION
•Make sure the table on which the product is installed is stable and solid. A table made of fragile materials
such as glass may be damaged.
•The monitor may tilt on uneven or slanted tables.
•Installation of the stand may leave a mark on the table.
•Avoid falls by verifying that the table is large enough to support the monitor.
•Unplug the power cord before moving or installing the monitor.There is risk of electric shock.
•Make sure to use the power cord that is provided in the product package and connect it to a grounded power
outlet.
•If you need another power cord, please contact your local dealer or the nearest retail store.
8
ENGLISH
Adjusting the Angle
The angle of the screen can be adjusted forward or backward from -5° to 10° for a comfortable viewing
experience.
WARNING
•Be careful not to touch or press the screen area when adjusting the angle of the monitor.
•Do not use the button on the back of the product when adjusting the angle.
•Be careful not to use excessive force when adjusting the angle.
Using the Kensington Lock
For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website
at http://www.kensington.com.
Connect the monitor to a table using the Kensington security system cable.
NOTE
•The Kensington security system is optional. You can obtain optional accessories from most electronics stores.
9
ENGLISH
Installing on the Wall
Secure at least a certain amount of vertical flat space in the partition to be installed.
In addition, ensure that it is strong and sturdy enough to hold and use the product.
B-Type C-Type
Hanger
Length (A)
B-Type 80mm
C-Type 200mm
NOTE
•The stand can be unfolded by pushing the button on the back of the product.
10
ENGLISH
CAUTION
•The partition in which the product is installed must be sufficiently rigid. If it is made of fragile material such
as glass, this may result in damage to the product.
•If the partition surface is uneven or tilted, the product may tilt.
•When the monitor is installed, the traces may remain on the partition.
•Do not hang heavy items such as bags or clothes on the monitor or cradle.
•If the partition cannot support the monitor sufficiently, be careful as the monitor may fall over.
•When standing the folded stand, be careful not to get your fingers caught between the monitor head and
the stand.
•Unplug the power cord before moving or installing the monitor.There is risk of electric shock.
•Make sure to use the power cord that is provided in the product package and connect it to a grounded power
outlet.
•If you need another power cord, please contact your local dealer or the nearest retail store.
NOTE
A
B-Type 550mm
C-Type 670mm
B530mm
C30~70mm
Andere Handbücher für 27BQ70QC
1
Inhaltsverzeichnis
Andere LG Monitor Handbücher
LG
LG UltraGear 38GL950G-B.AEU Bedienungsanleitung
LG
LG MW 71PY10 Bedienungsanleitung
LG
LG FLATRON L1950S Bedienungsanleitung
LG
LG 24GM79G-B Bedienungsanleitung
LG
LG L1900J Bedienungsanleitung
LG
LG 27EA31V Bedienungsanleitung
LG
LG Flatron L1718S-BN Bedienungsanleitung
LG
LG FLATRON L1710BM-AL R Series Bedienungsanleitung
LG
LG L1982U Bedienungsanleitung
LG
LG 34GK950F Bedienungsanleitung
LG
LG M2362DP-EM Bedienungsanleitung
LG
LG D2242P Bedienungsanleitung
LG
LG UltraGear 27GR95QE Bedienungsanleitung
LG
LG 34WN700 Bedienungsanleitung
LG
LG Digital Signage Bedienungsanleitung
LG
LG 34BN670 Bedienungsanleitung
LG
LG W2362TQ Bedienungsanleitung
LG
LG L227WGP Bedienungsanleitung
LG
LG W2053TV Bedienungsanleitung
LG
LG Flatron M197WD Bedienungsanleitung
