LG M197WA-PM.AWF Bedienungsanleitung
Make sure to read the
Safety
Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached on the product and give the information to your dealer when you ask for
service.
M197WA
User’s Guide
1
Before Connecting to the PC
Stand Installation
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off.
1
2
3
Carefully place the product screen side
down on a cushioned surface that will
protect product and screen from damage.
Insert the stand base into the product
Attach the monitor to the Stand Base
by turning the screw to the right.
* Turn the screw by using the screw
handle
Screw
2
Before Connecting to the PC
Detaching Stand
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off.
12
3
Place the set screen side down on a
cushion or soft cloth. Detach the monitor to the Stand
Base by turning the screw to the left.
Turn the screw by using the screw handle 4
Pull the stand base.
5
3
Before Connecting to the PC
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off.
Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range
Warning:
When adjusting the angle of the screen, do not put
your finger(s) in between the head of the monitor
and the stand body. You can hurt your finger(s).
Locking Device
Use this locking cable
(This has to be purchased
separately if required.
) to prevent theft.
Theft prevention locking device
-6
°
~ -2
°
12
°
~ 18
°
4
Before Connecting to the PC
WALL MOUNT:HORIZONTAL INSTALLATION
For proper ventilation,allow a clearance of 4 inches on each side and from the wall. Detailed installation
instructions are available from your dealer,see the optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
LOCATION
Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken
not to expose the set to any unnecessary vibration, moisture, dust or heat. Also, ensure that the set is
placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover.
If you intend to mount the set to a wall, attach Wall mounting interface (optional parts) to the back of the
set. When you install the set using the wall mounting interface (optional parts), attach it carefully so it
will not drop.
- Be sure to use screws and a wall mount that meet VESA standards.
- Using screws longer than those recommended might damage the product.
- Using screws that do not meet VESA standards might either damage the product or result in it coming
away from the wall. We will not be held responsible for any damage resulting from failure to follow
these instructions.
<Screw Mounting Interface Dimension >
100mm x 100mm hole spacing
4 inches
4 inches
4 inches
4 inches
4 inches
5
Name and Function of the Parts
Name of the Remote Control Buttons
1. Take out the battery cap.
2. Insert the batteries with correct polarity (+/-).
3. Close the battery cap.
• Dispose of used batteries in the recycle bin to prevent
environmental pollution.
Inserting batteries into remote control.
AAA Type
TV/PC :
Selects TV or PC mode.
Switches the set on.
POWER
INPUT
Each time you press the Input button it will
change to
TV AV Component
RGB DVI HDMI
If nothing is inputted for several seconds the
screen will automatically move to the
selected menu.
Number buttons
Able to directly select and change channel.
MTS
Press repeatedly to select Mono, Stereo, SAP sound tone.
But Stereo, SAP mode are available only if included on the broadcast signal.
A.PROG
Auto Channel Button
PC: Automatic adjustment function (Operational for the analog signal only)
MEMORY/ERASE
User can do manual channel selection and store or erase individual
channels.
CAPTION
Select a closed caption
Off Mode1 Mode2 Text1 Text2
Input
TV
AV
Component
RGB
DVI
HDMI
OK
POWER
TV/PC
INPUT
CH
CH
ENTER
MTS
MUTE
FCR
MENU
REVIEW
MEMORY/ERASE
CAPTION
A.PROG
SLEEP
APC
DASP ARC/
VOL
VOL
*
6
Name and Function of the Parts
Name of the Remote Control Buttons
CH
CH
ENTER
MUTE
FCR
MENU
REVIEW SLEEP
APC
DASP ARC/
VOL
VOL
*
CH ( ) Buttons
Up and Down Button.
Able to change channel.
VOL ( ) Buttons
Volume Button
ENTER Button
Use when functional adjustment is completed.
MENU
Use this button to enter the On Screen Display menu.
REVIEW
Turn to the last channel viewed.
SLEEP : SLEEP Timer
You can set a time period after which the all modes should switch
itself to standby.
Press the key repeatedly to select the number of minutes.
Press the key repeatedly to select the number of minutes.
APC Button
(Auto Picture Control)
Press repeatedly to select Clear, Optimum, Soft, User picture mode.
DASP Button
(Digital Auto Sound Processing)
Use this button to select the sound tone.
Press repeatedly to select Flat, Music, Movie, Sports, User
sound tone.
ARC/*
To select the image size of the screen.
•
When TV, AV mode: 16:9, Horizon, Zoom1,Zoom2, 4:3
•When RGB/DVI/HDMI/Component mode
: 16:9, 4:3
10 20 30 60
240 180 120 90
_ _ _ (off)
MUTE
Switches the sound on or off.
FCR
Favorite channel button.
7
Name and Function of the Parts
Rear View
AC IN
AC IN
AUDIO IN
(RGB/DVI)
VIDEO
COMPONENT
IN
AV IN
VIDEO AUDIO
(MONO)
S-VIDEO
AUDIO
Y
P
B
P
R
L
R
DVI-D IN (PC)
HDMI IN
AC IN
ANTENNA/
CABLE IN
LR
RGB IN (PC)
AC IN
Power Connector : Connect the power cord.
HDMI Digital Signal Connector
RGB, DVI Sound Jack : Connect to the jack in
the PC sound card.
Component Input Terminal
AV Input Terminal
DVI Digital Signal Connector
D-Sub Analog Signal Connector
TV Tuner Jack : Connect the antenna.
8
Name and Function of the Parts
AV Input Terminal
VIDEO AUDIO(MONO)
S-VIDEO
AC IN
LR
AC IN
Audio Input Terminal
Video Input Terminal
S-Video Input Terminal
9
AUDIO IN
(RGB/DVI)
DVI-D IN (PC)
9
Connecting to your PC
First of all, see if the computer, product and the peripherals are turned off.
Then, connect the signal input cable.
Connecting with the D-Sub signal input cable.
Rear side of the product.
Connecting to External Devices
RGB IN (PC)
Macintosh Adapter (Not included)
Use the standard Macintosh adapter since an
incompatible adapter is available in the market.
(Different signaling system)
1.
Audio cable
Connecting with the DVI signal input cable.
A
B
2.
Rear side of the product
.
Rear side of the product.
Rear side of the product.
Connect the audio cable.
•
Make sure to check the sound card connection terminal in the PC before connecting to the product.
If the PC sound card supports both Speaker Out and Line Out, change it to Line Out by setting the jumper
or the PC application. (For more details, refer to the sound card user’s guide.)
- Speaker Out : The terminal connected to the speaker that is not equipped with an amplifier.
- *Line Out : The terminal connected to the speaker equipped with an amplifier.
If Audio Out in the PC sound card has only Speaker Out, reduce the PC volume. This product is integrated
with an amplifier.
AC IN
AUDIOIN
(RGB/DVI)
VIDEO
COMPONENT
IN
AVIN
VIDEO AUDIO
(MONO)
S-VIDEO
AUDIO
Y
P
B
P
R
L
R
DVI-DIN (PC)
HDMI
ACINACIN
ANTENNA/
CABLEIN
LR
RGBIN (PC)
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere LG Monitor Handbücher
LG
LG 29WP500-B.AUS Bedienungsanleitung
LG
LG Flatron ez T710BHQ-K V Series Bedienungsanleitung
LG
LG 27UD59 Bedienungsanleitung
LG
LG 34WQ68X Bedienungsanleitung
LG
LG W1954SEV Bedienungsanleitung
LG
LG L227WTG Bedienungsanleitung
LG
LG 34UC97 Leitfaden
LG
LG L226WTQ-SF Kurzanleitung
LG
LG UltraGear 24GN60T-B Bedienungsanleitung
LG
LG L226WA-WN Bedienungsanleitung
LG
LG 32QP880N Bedienungsanleitung
LG
LG 29UC97 Bedienungsanleitung
LG
LG 60PY2DR Installationsanleitung
LG
LG 29UM69G Bedienungsanleitung
LG
LG E1960S Bedienungsanleitung
LG
LG Flatron L1510S Bedienungsanleitung
LG
LG L177WSBS Bedienungsanleitung
LG
LG 32SE3D Bedienungsanleitung
LG
LG L206WTY Bedienungsanleitung
LG
LG T910B Bedienungsanleitung
