LG RL-JA10 Bedienungsanleitung

RL-JA10

OWNER’S MANUAL

LG LCD PROJECTORLG LCD PROJECTOR

Please read this manual carefully before operating

your set.

Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the bottom of the set and

quote this information to your dealer when you

require service.

Model number :

Serial number :

LCD

PROJECTOR

LCD

PROJECTOR

FCC NOTICE

• A Class B digital device

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CONTENTS

INDEX

INTRO-

DUCTION

1Safety Instructions 3

Names of parts 7

INSTALLATION AND

COMPOSITION

2Installation Instructions 13

Composition 15

Turning on the Projector 17

Turning off the Projector 18

Operating the Projector 19

Selecting source mode 20

CONNECTIONBASIC FUN-

CTIONS

Function checking 32

Using Still function 33

Connecting to a Desktop PC 21

Connecting to a Notebook PC 22

Connecting to a Macintosh Desktop PC

Connecting to a Macintosh PowerBook

Connecting to a wireless trasmitter(TW-AV10T)

Connecting to a wireless receiver(TW-AV10R)

Connecting to a Video Source 29

Connecting to a DVD 30

Connecting to a D-TV Settop Box 31

SPECIAL

FUNCTIONS

5Selecting language 34

Using Flip Horizontal / Vertical function

Using Blank function 37

Checking lamp time 38

Selecting PC screen size input signal

POSI-

TIONING

Using Tracking function 43

TRACK-

ING

VIDEO /

AUDIO

Using Resize function 40

Adjusting screen display 41

Adjusting Video 45

Adjusting Audio 47

INFORMA-

TION

9Supported Monitor Display 48

Maintenance 49

Specifications 50

Before operating the

unit, please read this

manual carefully.

Safety Instructions

GAlways keep the safety instructions to prevent any potential accident or misuse of the projector.

✶The meanings of symbols in the manual and the unit are as below.

G Take care of danger that may happen under specific condition.

G Take care of electric shock that may happen under specific condition.

G After reading this manual, keep it in the place that the user always can contact easily.

GSafety Instructions have two kinds of information, and each meaning of it is as below.

WARNING The violation of this instruction may cause serious injuries and even death.

NOTES The violation of this instruction may cause light injuries or damage of the projector.

WARNING

Do not attempt to repair or adjust this

equipment. Contact your dealer or Service

center. High risk of electric shock!

Don’t insert any object into the exhaust vent .

This may cause a fire or could give

an electric shock.

Earth wire should be connected.

- If the earth wire is not connected, there is possible a

danger of electric shock caused by the current leakage.

- If grounding methods are not possible, a separate cir-

cuit breaker should be employed and installed by a

qualified electrician.

- Do not connect ground

to telephone wires,

lightning rods or

gas pipe.

Short-circuit

breaker

Power

Do not place anything containing liquid on

top of the projector. High risk of Electric

Shock or damage to the projector.

This may cause a fire

or could give an

electric shock.

WARNING

Don’t remove any covers (except lens

cover). High risk of Electric Shock! Use an air spray or soft cloth that is wet

with a neutral detergent and water for

removing dust or stains on the projection

lens.

Don’t look directly onto the lens when the

projector is in use. Eye damage may occur!

Don’t use the projector in damp place such

as a bathroom or any place where it is like-

ly to get wet. Serious damage could occur

or risk of Electric Shock!

Don’t use the projector if there is smoke

or unusual smell from the projector.

Disconnect from the mains and contact

the service center. Risk of fire!

Leave an adequate distance(30cm or more)

around the projector.

To cooling the lamp, leave the projector

plugged in for at least 3 minutes after

switching off the procector. if not, it cause

shortening of projector life.

INTRODUCTION

RGB(DC/DTV) RS-232C

Don’t clog the opening(absorption tube/ex-

haust pipe) of the projector.

It makes internal temperature increase and caus-

es a fire.

absorption tube exhaust pipe

Safety Instructions

NOTES

Only use the projector on a level and sta-

ble surface.

It may fall down

or be upset.

Be sure to unplug when you don’t use

the projector for a long period or you are

absent.

Accumulated dust may

cause a fire,

electric shock from

deterioration,

or electric leakage.

No contact while working, or right after the

lamp is off since the exhaust port and the

lamp lid generate heat.

Disconnect from the mains and remove all

connections before moving.

Damage of cords may cause

a fire or electric shock.

Never touch the power plug with wet hand.

It may cause electric shock.

Don’t use alcohol, benzene, or thinners to

clean any plastic parts of the projector.

Never use industrial chemicals or deter-

gents.

Ensure the power lead doesn’t trail across

any hot objects like a heater.

It may cause a fire

or electric shock.

Hold the plug tightly when unplugging.

If you hold the cord when unplugging , the internal

line of the cord may be cut. This may cause heat-

ing and fire.

NOTES

Don’t touch the lens of the projector. It may

cause damage of it. Don’t use any sharp tools on the projector

as this will damage the casing.

If the projector requires cleaning inside con-

tact the service centre. Accumulated dust

can cause mechanical failure.

Place the projector where people will not

trip or tread on the power lead.

Use the indicated type of power source on

the projector. If you are not sure of the type

of power available, consult your dealer or

customer service center.

Don’t place the projector or the remote

control on a heater or use in a heated car.

Don’t use the projector when the power

cord or the plug is damaged or the con-

necting part of wall socket is loose.

It may cause electric shock

or a fire.

Contact your dealer for replacing a new

lamp.

INTRODUCTION

Names of parts

Audio

RGB(PC Input) RS-232C

Component(DVD/DTV Input)

RAudio

Audio

L/Mono

Video

RAudio

L/Mono

Video

S-Video

Video 1

DC Out

(12V/0.5A)

Video2

Main Body

Rear Connecting Part

Foot adjuster

lever

Foot adjuster

lever

Indicators

Front remote

control sensor

Focus ring Lens cover

Foot

RGB(PC Input) RS-232C

(Program Download)

DC Out(12V/0.5A)

Component(DVD/DTV Input)

Audio

Kensington Security

System Connector

(Refer to page 16)

Rear remote control sensor

Video1/Video2/S-Video

Zoom ring

Power button

Control panel

The LCD projector is manufactured using high-precision technology. You may, however, see tiny black points

and/or bright points(red, blue, or green) that continuously appear on the LCD projector. This is a normal result

of the manufacturing process and does not indicate a malfunction.

Control Panel

SOURCE PATTERN

ENTER

VOL VOL

POWER

POWER Button

Indicators D, EButton

Selects menus and

items in the menus.

MENU Button

Selects or closes menus.

SOURCE Button

Switches to RGB, Video 1, Video 2,

S-Video, Component mode.

VOLUME F, GButton

Adjusts volume level and

functions of menus.

ENTER AButton

Checks present mode and

saves the change of functions.

PATTERN Button

When pressing PATTERN

button, the screen display’s

the screen for focus adjust-

ment.

INTRODUCTION

Names of parts

SOURCE

ENTER

PLAY FWD

TRACKING

AUTO RESIZE STILL ZOOM

BLANK APC MUTE VOL VOL

POWER

PROJECTOR

VIDEO DVD

RECORD STOP SKIP SKIP

OPEN/CLOSE

PAUSE REW

. .

Remote Control

POWER Button

Button to select

desired product

VCR Buttons

RESIZE Button(Refer to p.40)

AUTO TRACKING Button

(Refer to p.43)

BLANK Button(Refer to p.37)

MENU Button

APC Button(Refer to p.46)

(D, E, F, G) Button

ENTER(A) Button

ZOOM Button(Refer to p.42)

STILL Button(Refer to p.33)

Indicator of product choice button

VOLUME -, + Button

MUTE Button

*Switches the sound on or off.

SOURCE Button(Refer to p.20)

Andere Handbücher für RL-JA10

Inhaltsverzeichnis

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung