LG SQ-G2ST65 Bedienungsanleitung

ENGLISH_index

Stand

www.lg.com

Electronics Inc.

OWNER’S MANUAL

Please read this manual carefully before

operating your set and retain it for future

reference.

SQ-G2ST55

SQ-G2ST65

SQ-G2ST8377

The model and serial number of the

product are located on the back and on

one side of the product. Record them

below in case you ever need service.

Model

Serial No.

*MFL718723192203REV00*

* Image shown may differ from your product.

Safety instructions

This symbol is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions

in the literature accompanying the appliance.

Please read these safety precautions carefully before using the product.

•When lifting or moving the product, at least two people are

required due to the heavy weight of the product.

-The product may fall down, causing a malfunction or

injury.

•Do not let children hang on or climb onto the product.

-The product may fall down, causing an injury or even

death.

•Do not install the product in a place which is unstable or

vibrating or a place where the product is not completely

supported such as a shaky shelf or a tilted place.

-The product may fall down or overturn, causing an injury

or malfunction.

•Put the product on a flat and firm floor.

•When moving or handling a product assembled with the

Stand, be cautious about damaging the exterior of the

product.

•When there is a stain or fingerprint left on the surface, wipe

it off gently.

-When removing a stain, do not use excessive force. Wiping

with excessive force may cause scratches or discoloration

on the product.

Assembling and Preparing

Accessories

x 4

(M4 x L20)

(Only SQ-G2ST55, SQ-G2ST65)

(Only SQ-G2ST8377)

How to Assemble the Stand

•When assembling the stand, put the product on a table or a

flat floor with its screen facing downward. Here, first put a

soft and fluffy cloth on the place, and then put the product

on top of it to prevent the screen from being damaged.

•When assembling the stand, check if the screws are

completely fastened. (If they are not completely fastened,

the product may lean forward after being installed.) Avoid

fastening the screws with excessive force because otherwise

the joint part of the screws may be worn out, and the screws

might come off.

•When assembling the product, do not use foreign substances

(oil, lubricant, etc.) on the screws.

-It may cause damage to the product.

•Before installing a wall mount support, disassemble the

Stand by conducting the method to assemble the stand in a

reverse order.

5x 4

M4 x L20

7-1SQ-G2ST55

SQ-G2ST65

8-1SQ-G2ST55

SQ-G2ST65

9-1SQ-G2ST55

SQ-G2ST65

7-2SQ-G2ST8377

8-2 SQ-G2ST8377

9-2 SQ-G2ST8377

Mounting on a Table

10 cm

(4 inches)

10 cm

8 cm

(3.1 inches)

21 cm

(8.2 inches)

•Lift and tilt the TV into its upright position on a table.

-Leave a 21 cm (8.2 inches) (minimum) space from the wall for

proper ventilation.

•Only use the authorized stand and wall mounting bracket made

specifically for LG products.

-Pursuant to Consumer Protection Law, LG Electronics will not be

held responsible for any product malfunction, material damage or

injury caused by using products not authorized by LG Electronics.

20˚

•If there is a problem with angle adjustment, lift the product slightly

and put it back down.

•Do not apply foreign substances (oils, lubricants, etc.) to the screw

parts when assembling the product. (Doing so may damage the

product.)

•If you install theTV on a stand, you need to take actions to prevent

the product from overturning. Otherwise, the product may fall over,

which may cause injury.

•Do not use any unapproved items to ensure the safety and product

life span.

•Any damage or injuries caused by using unapproved items are not

covered by the manufacturer’s warranty.

•Make sure that the screws are inserted correctly and fastened

securely. (If they are not fastened securely enough, the TV may tilt

forward after being installed.) Do not use too much force and over

tighten the screws; otherwise screw may be damaged and not

tighten correctly.

•Make sure theTV is level.

•It is safe to install the product according to the installation method

to prevent the damage to the product or personal injury even if the

proudct is pulled forward.

•Allow sufficient space around the product. Otherwise, it may lose its

balance during rotation and fall, causing injury or product damage.

Make sure to use a cabinet or shelf that is an appropriate size for the

product.

•When rotating theTV, make sure there are no objects around it, and

place the product on a flat surface for smooth rotation. Users who are

not professional installation staff can also adjust the angle.

Securing the TV to a Wall

1 Insert and tighten the eye-bolts, orTV brackets and bolts on the back

of theTV.

• If there are bolts inserted at the eye-bolts position, remove the

bolts first.

2 Mount the wall brackets with the bolts to the wall.

Match the location of the wall bracket and the eye-bolts on the rear

of theTV.

3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the flat surface.

•Use a platform or cabinet that is strong and large enough to support

theTV securely.

•Brackets, bolts and ropes are not provided. You can obtain additional

accessories from your local dealer.

Specifications

Model Name Width x Height x Depth

(mm) (inches)

Weight

(kg) (lbs)

SQ-G2ST55 432 x 225 x 245

(17.0 x 8.8 x 9.6)

4.2

(9.2)

SQ-G2ST65 432 x 225 x 245

(17.0 x 8.8 x 9.6)

4.2

(9.2)

SQ-G2ST8377 501 x 252 x 321

(19.7 x 9.9 x 12.6)

6.0

(13.2)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung