LG MultiSITE CRC1 Series Bedienungsanleitung

MultiSITE CRC1 Series Controllers

INSTALLATION MANUAL

PREMTBVC0 – MultiSITE CRC1

PREMTBVC1 – MultiSITE CRC1+

09-26-2017 2:43 PM

Occ Auto Heat

74° 78

Indoor °F

Humidity

66 %

Auto

The instructions included in this manual must be followed to prevent

product malfunction, property damage, injury, or death to the user

or other people. Incorrect operation due to ignoring any instructions

will cause harm or damage. A summary of safety precautions begins

on page 4.

Do not throw away, destroy, or lose this manual.

Please read carefully and store in a safe place for future reference.

Content familiarity required for proper installation and operation.

For more technical materials such as submittals, engineering

databooks, and catalogs, visit www.lghvac.com.

For continual product development, LG Electronics U.S.A., Inc., reserves the right to

change specifications without notice.

©LG Electronics U.S.A., Inc.

This document, as well as all reports, illustrations, data, information, and other materials

are the property of LG Electronics U.S.A., Inc.

PROPRIETARY DATA NOTICE

This document, as well as all reports, illustrations, data, information, and other

materials are the property of LG Electronics U.S.A., Inc., and are

disclosed by LG Electronics U.S.A., Inc., only in confidence.

IM_CRC1_Series_Controllers_10_16

TABLE OF CONTENTS

Safety Instructions...............................................................................................4

Introduction..........................................................................................................7

MultiSITE CRC1 Series Controllers..............................................................................7

Compatible Equipment .................................................................................................7

Accessories ..................................................................................................................7

Safety ...........................................................................................................................7

Controller Overview.............................................................................................8

Home Screen................................................................................................................8

Selecting Installation Location......................................................................................9

Controller Installation...........................................................................................9

Installing the Controller...............................................................................................10

Controller Setup.................................................................................................13

Controller Setup..........................................................................................................13

Setpoint Adjustment....................................................................................................14

Accessories Installation.....................................................................................16

ZigBee Pro Wireless Module......................................................................................16

Ceiling Motion Sensor ................................................................................................18

Wall Mounted Motion Sensor......................................................................................21

Door/Window Sensor..................................................................................................24

ZigBee Setup.....................................................................................................28

ZigBee Pro Quick Setup.............................................................................................28

BACnet MS/TP Setup........................................................................................30

MultiSITE CRC 1 Controller

Due to our policy of continuous product innovation, some specifications may change without notification.

The instructions below must be followed to prevent product malfunction, property

damage, injury or death to the user or other people. Incorrect operation due to ignor-

ing any instructions will cause harm or damage. The level of seriousness is classi-

fied by the symbols below.

SAFETY INSTRUCTIONS

WARNING

The information in this manual is intended for use by a trained technician

familiar with the U.S. National Electric Code (NEC) who is equipped with the

proper tools and test instruments.

Failure to carefully read and follow all instructions in this manual may result in equipment

malfunction, property damage, personal injury and/or death.

DANGER

This symbol indicates an imminently hazardous situation

which, if not avoided, will result in death or serious injury.

WARNING

This symbol indicates a potentially hazardous situation

which, if not avoided, could result in death or serious injury.

CAUTION

This symbol indicates a potentially hazardous situation

which, if not avoided, may result in minor or moderate

injury.

Note:

This symbol indicates situations that may result in equip-

ment or property damage accidents only.

This symbol indicates an action that should not be

performed.

TABLE OF SYMBOLS

DANGER

Do not touch any exposed outdoor unit wiring, terminals, or other elec-

trical components with tools or exposed skin. Only qualied technicians

should install, use or remove this unit.

Improper installation or use may result in re, explosion, electric shock, physical injury

and/or death.

Don’t use or store ammable gas or combustibles near an outdoor or

indoor unit.

There is risk of re, explosion, and physical injury or death.

Installation Manual

Due to our policy of continuous product innovation, some specifications may change without notification.

SAFETY INSTRUCTIONS

Do not install the MultiSITE Controller unit if it will be exposed to rain or

other precipitation. Do not install the unit in a location exposed to open

ame or extreme heat. Do not touch the unit with wet hands.

There is risk of re, electric shock, physical injury and/or death.

Replace all control box and panel covers.

If cover panels are not installed securely, dust, water and animals may enter the unit,

causing re, electric shock, and physical injury or death.

Wear protective gloves when handling equipment.

Sharp edges may cause personal injury.

Dispose of any packing materials safely.

• Packing materials, such as nails and other metal or wooden parts may cause punc-

ture wounds or other injuries.

• Tear apart and throw away plastic packaging bags so that children may not play

with them and risk suffocation and death.

Do not change the settings of the protection devices.

If the pressure switch, thermal switch, or other protection device is shorted and forced

to operate improperly, or parts other than those specied by LG are used, there is risk of

re, electric shock, explosion, and physical injury or death.

If the air conditioner is installed in a small space, take measures to prevent

the refrigerant concentration from exceeding safety limits in the event of a

refrigerant leak.

Consult the latest edition of ASHRAE (American Society of Heating, Refrigerating, and

Air Conditioning Engineers) Standard 15. If the refrigerant leaks and safety limits are

exceeded, it could result in personal injuries or death from oxygen depletion.

Note:

MultiSITE Controller is for use with select LG commercial air conditioning

systems only. Do not attempt to use MultiSITE Controller with any other

type of system. Refer to the compatible equipment list in this manual.

There is risk of equipment damage or degraded performance

Do not cut, lengthen or shorten the cable between the MultiSITE Control-

ler unit and the indoor unit. Do not install the MultiSITE Controller unit in

a location where the cable cannot be safely and easily connected between

the two units. Do not allow strain on this cable.

There is risk of equipment damage.

MultiSITE CRC 1 Controller

Due to our policy of continuous product innovation, some specifications may change without notification.

Note:

Clean up the site after all procedures are nished, and check that no metal

scraps, screws, or bits of wiring have been left inside or surrounding the

controller or indoor units.

Provide power to the outdoor unit compressor crankcase heaters at least

six (6) hours before operation begins.

Starting operation with a cold compressor sump(s) may result in severe bearing damage

to the compressor(s). Keep the power switch on during the operational season.

Do not block the indoor unit inlet or outlet.

Unit may malfunction.

Securely attach the electrical cover to the indoor unit. Non-secured covers

can result in re due to dust or water in the service panel.

Do not allow water, dirt, or animals to enter the unit.

There is risk of unit failure or degraded performance.

Do not spill water or other liquid on the inside of the indoor unit, espe-

cially on electrical components. Do not drop the MultiSITE Controller

unit into water. If the unit is immersed in water or other liquid, contact your

local authorized LG distributor for support.

There is risk of unit failure or degraded performance.

Electronic controls are static sensitive devices.

Discharge yourself correctly before manipulating and installing the MultiSITE Controller.

This device must be installed to provide a separation distance of at least

8 inches from all persons and must not be located or operating in conjunc-

tion with any other antenna or transmitter.

Operation is subject to the following two conditions: (1) this device may

not cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of the device.

A short circuit or wrong wiring may permanently damage Remote Control-

ler or equipment.

SAFETY INSTRUCTIONS

Installation Manual

Due to our policy of continuous product innovation, some specifications may change without notification.

INTRODUCTION

MultiSITE CRC1 Series Controllers

This manual describes how to install the LG MultiSITE Com-

mercial Remote Controllers (CRC) 1 and the accessories

described below. There are two controller models:

• MultiSITE CRC1 (Model PREMTBVC0)

• MultiSITE CRC1+ (Model PREMTBVC1)

The two models are identical with the exception of two

functions included in the MultiSITE CRC1+ only:

• Motion sensor

• Humidity sensor

Compatible Equipment

MultiSITE CRC1 Controllers are compatible with LG

Commercial Air Conditioning indoor units (except PTAC

units). Do not attempt to use a MultiSITE CRC1

controller with any other equipment.

Accessories

These accessories are available for MultiSITE CRC1 controllers:

• ZigBee®Pro wireless card

Model ZVRCZPWC1

• Door and window switch

Model ZVRCZDWS1

• Wall mounted occupancy sensor

Model ZVRCZWOC1

• Ceiling mounted occupancy sensor

Model ZVRCZCOC1

The ZigBee®Pro wireless card is

required for communication between the

controller and the other accessories.

Safety

Safety of personnel is the primary

concern during all procedures. Read and

understand the safety summary at the

front of this manual.

Typical MultiSITE

CRC1 Controller

MultiSITE CRC1 Controller

Optional Accessories

09-26-2017 2:43 PM

Occ Auto Heat

74°

Indoor °F

Humidity

66 %

Auto

*ZigBee is a registered trademark of the ZigBee Alliance.

ZigBee®Pro Wireless Card Door/Window Switch

Wall Mounted

Occupancy Sensor

Ceiling Mounted

Occupancy Sensor

MultiSITE CRC 1 Controller

Due to our policy of continuous product innovation, some specifications may change without notification.

CONTROLLER OVERVIEW

Home Screen

Note:

Available functions/features may differ based on the connected system.

When any change is made to a parameter, the value is automatically

saved in memory when the next parameter is selected or another page

is opened.

Arrows auto-increment/decrement at higher speed when holding button

for more than 2.5 seconds.

09-26-2017 2:43 PM

Occ Auto Heat

74°

Indoor °F

Humidity

66 %

Auto

Locked by central controller

Occupancy Status

Occupied (Occ) or

Unoccupied (Unocc) Operation Mode

Status

Current Fan

Speed Setting

Up Arrow

Raise Temperature

Setpoint

Room Indoor

Temperature

Down Arrow

Lower Tempera-

ture Setpoint

On/Off

Turn the display

on or off

Schedule

Set weekly

schedule

Provides user with

access to less often

used functions.

Fan Speed

Set fan to Slow,

Low, Low-Med,

Medium, Med-High,

High, Power, Auto.

(Available options

depend on IDU

model.)

Operation Mode

Set Cool, Heat, Auto

Cool, Auto Heat, Fan,

Dry modes

Note: Pressing and holding

the Operation Mode icon

takes the user to the

Operation Mode page.

Short Network

Message

Note: Long-press of the

Fan Speed button when in

cooling mode triggers Power

Cooling mode. If in Power

Cooling mode, last airow

segment on top is lit in purple

and the text changes from

“Fan” to “Power Cool”. This

mode lasts for 30 minutes

and then reverts back to the

previous fan speed.

Auto

The controller home screen is shown and described below.

Current TimeCurrent Date

Room Indoor

Humidity

Installation Manual

Due to our policy of continuous product innovation, some specifications may change without notification.

CONTROLLER INSTALLATION

Selecting Installation Location

The room temperature sensor is inside the controller, so the installation

location is critical to proper system operation. Install the controller in a

location away from direct sunlight, high humidity, and direct flow of hot or

cold air. Install the controller on a flat, clean wall surface approximately 5 ft

above the floor in an area with good circulation and average temperature.

Do not install the controller where it is exposed to:

• Drafts or dead spots behind doors and in corners

• Hot or cold air from ducts

• Radiant heat from sun or appliances

• Concealed pipes or chimneys

• Uncontrolled areas such as on an outside wall

Refer to Figure 1 for a typical installation location.

Figure 1: Typical Controller Location

5ft

yes

09-26-2017 2:43PM

Occ Auto Heat

74°

Indoor °F

Humidity

66 %

Auto

Lockedby central controller

09-26-2017 2:43PM

Occ Auto Heat

74°

Indoor °F

Humidity

66 %

Auto

Lockedby central controller

MultiSITE CRC 1 Controller

Due to our policy of continuous product innovation, some specifications may change without notification.

CONTROLLER INSTALLATION

Installing the Controller

Follow this procedure to install the controller.

Note:

• If replacing an existing MultiSITE CRC1 Series Remote Controller, label the wires

before removal.

• Electronic controls are static sensitive devices. Discharge yourself properly before

manipulating and installing the Remote Controller.

• A short circuit or wrong wiring may permanently damage the Remote Controller or

the equipment.

• This Remote Controller must be installed to provide a separation distance of at

least 8 inches from all persons and must not be collocated or operating in conjunc-

tion with any other antenna or transmitter.

• If your installation includes wireless accessories, you can install the optional

ZigBee Pro wireless module when the controller case is open. Refer to page 16

for Zigbee Pro wireless module installation instructions.

Figure 2: Open Cover

1. Remove security screw (if any) on

bottom of Remote Controller cover

(Figure 2).

2. Read FCC ID and IC label installed

in cover before installing any wire-

less product.

3. Ensure correct side of base faces

up.

4. Pull cables 6 inches out from wall.

5. Align base and mark location of two

mounting holes on wall

(Figure 3).

6. Install anchors in wall.

7. Insert wires through center opening

of base.

8. Insert screws in mounting holes on

each side of base.

9. Strip each wire 1/4 inch from end.

Andere Handbücher für MultiSITE CRC1 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LG Fernbedienung Handbücher

LG AN-MR400G Bedienungsanleitung

LG Magic Remote AN-MR19BA Bedienungsanleitung

LG AN-MR650A Bedienungsanleitung

LG PREMTTB101 Kurzanleitung

LG Magic Remote Bedienungsanleitung

LG ZENITH 27FB32COM Bedienungs- und Wartungshandbuch

LG Magic Remote AN-MR19BA Bedienungsanleitung

LG Smart AC Bedienungsanleitung

LG AN-MR600 Bedienungsanleitung

LG AN-PM19BA Bedienungsanleitung

LG AM-SR20HB Bedienungsanleitung

LG PQRCUDS0 Kurzanleitung

LG AN-MR300Q Bedienungsanleitung

LG AKB732955 Bedienungsanleitung

LG EM9600 Bedienungsanleitung

LG AN-MR3005 Bedienungsanleitung

LG AN-SP700 Bedienungsanleitung

LG AKB32977003 Bedienungsanleitung

LG V-NET ACS PREMTA000 Bedienungsanleitung

LG PQRCVSL0 Kurzanleitung

LG AN-MR300 Bedienungsanleitung

LG Magic Remote MR23GN Betriebsanleitung

LG PREMTB001 Kurzanleitung

LG 457938 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung