LG PQRCFCS0C Kurzanleitung

ENGLISH

Simple Wired Remote Controller

IMPORTANT

• Please read this installation manual completely

before installing the product.

• Installation work must be performed in

accordance with the national wiring standards

by authorized personnel only.

• Please retain this installation manual for future

reference after reading it thoroughly.

Owner's & Installation Manual

Visit us at : http://www.lgservice.com

P/No.: 3828A20860W

Models: PQRCFCS0C

ENGLISH ITALIANO ESPAÑOL FRANÇAIS DEUTSCH PORTUGUÊS

êìëëäàâ üáõä

2Simple Wired Remote Controller

Simple Wired Remote Controller Ownerʼs & Installation Manual

TABLE OF CONTENTS

nSafety Precautions..............................................................3~4

nPart Description ......................................................................5

nWired remote controller switch information.........................6

nInstallation Method .................................................................7

nNecessary functions before using .................................9~12

• Trial Operation..........................................................................................9

• Celsius/Fahrenheit Switching ...............................................................10

• Setting the Central Control Address ....................................................11

• ESP Function ..........................................................................................12

nHow to use the Mode Selection Button.........................13~19

• Cooling Operation ..................................................................................13

• Heating Operation ..................................................................................14

• Auto-Operation .......................................................................................15

• Dry(Dehumidification) Operation ..........................................................16

• Fan Operation .........................................................................................16

• Fan Speed Selection ..............................................................................17

• Indoor Temperature Display..................................................................18

• Child Lock ...............................................................................................19

Safety Precautions

Ownerʼs & Installation Manual 3

ENGLISH

Entrust installation of the

product to the service center

because improper installation

may cause fire, an electric

shock, explosion, and physical

injury.

Use the original parts in

order to prevent fire, an

electric shock, explosion,

and product breakdown.

Keep combustible and/or

inflammable materials away

from the product in order to

prevent fire or product

breakdown.

Do not disassemble, repair, or

modify the product at your

discretion in order to prevent fire

or an electric shock.

Do not install the product in wet

and humid areas in order to

prevent product breakdown.

Do not expose the product to the

sun in order to prevent product

breakdown.

nInstallation

Safety Precautions

• The installation requires expert skills, and it should be installed by the service center or other shops specialized

in the installation and recognized by our company.

• For all the problems arising after installation by someone who has no relevant qualifications, LG will not provide

free service.

• The following safety cautions are provided to prevent unexpected dangers or losses.

: If the user does not follow the mandatory items, it may result in serious injury or death.

: If the user does not follow the mandatory items, it may cause personal injury or property

damage.

: Warning and Caution are to call the userʼs attention to the possible danger. Read and follow

them carefully in order to prevent a safety accident.

: Warning and Caution are indicated in this guide and the product itself to help protect the users

from danger.

WARNING

CAUTION

WARNING

Safety Precautions

4Simple Wired Remote Controller

Do not modify or lengthen the

power cable at your discretion.

It may cause fire or an electric

shock.

Do not place a heating device

near the product. It may cause

fire.

Do not drop water on to the

product. It may cause an electric

shock or product breakdown.

Do not place something heavy on

the power cable. It may cause fire

or an electric shock.

Do not place a heavy thing on the

product. It may cause product

breakdown.

If the product was submerged

under water, ask the service

center for instruction. It may

cause fire or an electric shock

unless you do that.

nIn-use

Make sure children or senor

citizens use the product under

proper observation in order to

prevent safety accident.

Do not subject the product to

shock. It will cause product

breakdown.

Do not pick the product with a

sharp tool. It may cause

product breakdown with the

damage to its parts.

Do not clean the product with strong cleanser such

as solvent. Use soft clothes in order to prevent fire

or product deformation.

Do not touch the product with a wet hand. Do not

pull the lead cable. It may cause product breakdown

or an electric shock.

CAUTION

Part Description

Ownerʼs & Installation Manual 5

ENGLISH

Part Description

Accessory

Connecting Cable

(1EA)

Fixing Screw (2EA) User / Installation

Manual

Installation Paper

Simple Wired Remote Controller

PQRCFCS0C

FAN

SPEED

ROOM

TEMP

Cooling Heating Auto Dry Fan

Defrost Preheat Out door

Slo

Med

Room Temp

Total on

Central Run

°C

°F

Each function will be shown on the display panel for three second or so when the power is applide at

first.

1. Operation Display Panel

2. On/Off Function

3. Fan Speed Button

4. Temperature Control Button

5. Room Temperature Check

Button

Wired remote controller switch information

6Simple Wired Remote Controller

SWGR

SWHI

Room Temp. Sensing

Ceiling Height/Default E.S.P

Group Control

SWPD

SWTH

Select Product

321

Group control switch

1. For individual control/Master use

2. For group control/Slave use

Ceiling height selection switch

1. Low ceiling

2. Standard ceiling

3. High ceiling

Product selection switch

1. Cooling Only product

2. Heat Pump product

Indoor temperature sensor

selection switch

1. Use the temperature sensor on the remote

controller.

2. Use the temperature sensor on the product.

3. Use the sensors on the product and remote

controller.

Wired remote controller switch information

• When changing the product selection switch and group control switch, the power must be reconnected to reflect

the changes.

• The central control could operate inappropriately depends on indoor unit type, when the remote controller is set

as slave.

Ownerʼs & Installation Manual 7

ENGLISH

Installation Method

CN-REMO

LO2K

J15

LO1K

LO1D C07D

C01K

J14

CN-DISP

CN-M CN-ZONEC

IC01A

2cm

The position of the fixing screws

Main

indoor unit

Red Yellow Brown

Main frame

Fixing the

remote controller

Side of

remote Controller

Side of

Indoor Unit

Put the installation paper on the place and determine the

position and height of the fixing screws of the wired remote

controller.

• Refer to the printed side of the installation paper.

Plug the connecting cable into the indoor unit.

• The product is being shipped with the cable

connected only to the remote controller.

Fix the connecting cable with the cable rack.

Remove the installation paper before installing

the remote controller so that it can fit at the right

place.

* Do not embed the remote controller into the wall. (It may cause the breakdown of the temperature

sensor.)

* If you want to install a number of remote controller at the same place in a vertical line, install them at

regular intervals of 2cm. (It may cause the breakdown of the temperature sensor.)

* Do not install the cable with a distance of 50 m or longer. (This can cause communication error.)

* When installing the cable, check whether the connector between the remote controller and the

product is installed properly. The connector will not be connected when installed in opposite sides.

pSupply the power after connecting wired remote controller.

When you need to change wired remote controller, switch off the main power and change it.

If the wired remote controller is changed before switching off the main power, the option function of

the indoor unit can't be used. (option function like "slo" fan speed selection)

Installation Method

Installation instruction

8Simple Wired Remote Controller

GND

12V

Signal wire

PQRCUCS0C

FAN

SPEED

MODE

TEMP

Cooling Heating Auto Dry Fan

Defrost Preheat Out door

Slo

Med

RoomTemp

Totalon

CentralRun

GND

12V

B Y R B Y R

MASTER SLAVE

Signal wire GND

12V

Signal wire

PQRCUCS0C

FAN

SPEED

MODE

TEMP

Cooling Heating Auto Dry Fan

Defrost Preheat Out door

Slo

Med

RoomTemp

Totalon

CentralRun

PQRCUCS0C

FAN

SPEED

MODE

TEMP

Cooling Heating Auto Dry Fan

Defrost Preheat Out door

Slo

Med

RoomTemp

Total on

CentralRun

Group control

1. When installing more than 2 units of air

conditioner to one wired remote controller,

please connect as the right figure.

• If it is not event communication indoor unit, set

the unit as slave.

• Check for event communication through the

product manual.

• Refer to regarding page on how to set the slave.

When installing more than 2 wired

remote controllers to one air conditioner,

please connect as the right picture.

•

When installing more than 2 units of wired

remote controller to one air conditioner, set one

wired remote controller as master and the others

all as slaves, as shown in the right picture.

• Refer to Installer setting section on how to

set master/slave.

• You cannot control the group as shown in

the right for some products.

<When simultaneously connecting

2 sets of wired remote controller>

Some products do not use 'Group control'. It depends on the product type.

For more detail, refer to the product manual.

When controlling multiple indoor units with event communication function with one remote

controller, you must change the master/slave setting from the indoor unit.

- Indoor units, the master/slave configuration of the product after completion of indoor unit power

ʻOFFʼ and then ʻONʼ the power after 1 minutes elapsed sign up.

- For ceiling type cassette and duct product group, change the switch setting of the indoor PCB.

For wall-mount type and stand type product, change the master/slave setting with the wireless

remote controller. (Refer to wireless remote controller manual for detail)

hWhen installing 2 remote controllers to one indoor unit with event communication function, set

the master/slave of the remote controller. (Refer to remote controller master/slave selection)

When controlling the group, some functions excluding basic operation setting, fan level

Min/Mid/Max, remote controller lock setting and time setting may be limited.

#3 switch OFF: Master (Factory default setting) #3 switch ON: Slave

2345678

Ownerʼs & Installation Manual 9

ENGLISH

Necessary functions before using

Out door

Room Temp"

Total on"

Central Run

Defrost Preheat

PQRCFCS0C

FAN"

SPEED

ROOM"

TEMP

If you want to set the trial operation mode, press the

Room Temperature button and the fan speed button

same time for three seconds.

Then the product will begin the trial operation and the

display will be like as shown on left side picture.

If you want to cancel the trial operation mode, just

press the On/Off button.

The trail operation will shut down automatically after

18 minutes and system will go to the standby mode.

Trial Operation

The trial operation is to check the installation status of the product. The temperature will not be controlled during

trial operation. Instead the product will operate in several modes such as cooling, strong wind, comp-on.

* This function might not be available for Multi Product like Multi V system.

10 Simple Wired Remote Controller

PQRCFCS0C

FAN

SPEED

ROOM

TEMP

Room Temp

Total on

Central Run

Defrost Preheat Out door

Out door

Room Temp

Total on

Central Run

Defrost Preheat

Room Temp

Total on

Central Run

Defrost Preheat Out door

Out door

Room Temp

Total on

Central Run

Defrost Preheat

TEMP

Celsius/Fahrenheit Switching

Necessary functions before using

If you want to change the temperature unit as the

Celsius or Fahrenheit, press the Temperature control

button(▼) and the Fan speed button same time for

three seconds to enter the setting Mode.

Press the temperature control button to change the

unit.

Ex) Setting unit as Fahrenheit.

After setting, press the Temperature control button(▼)

and the Fan speed button same time for three seconds

to exit the setting Mode.

The system will automatically release without input

after 60 seconds.

Inhaltsverzeichnis

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung