LG RCB-100 Bedienungsanleitung

English

Español

Rev 1.0 US

LG Electronics Inc., 2012

Note: Please read all information carefully prior to

using RCB-100 in order to prevent damages to the

product and to enjoy the best performance.

WARNING :

This product contains chemicals known to the State

of California to cause cancer and birth defects or

reproductive harm.

Wash hands after handling.

RCB-100 User Manual

Bluetooth Mobile Wireless Remote Controller

ENG

Introduction 3

- Included in the package 3

Name and Function 4

- Basic Remote Control Functions 4

How to Use 5

- Paring Remote Control 5

- Function 5

- Replacing Remote Control Battery 6

Status Indicator 7

Q&A on Troubleshooting 7

Specification 8

Precautions 8

Declaration of Confirmation 9

Additional Information 9

Limited Warranty 11

Table of Contents

ENG

Included in the Package

The LG RCB-100 is a light weight wireless remote controller that uses Bluetooth®

technology.

This product can be used as a remote controller accessory for devices supporting

Bluetooth V4.0 and RCB-100 remote controller.

Battery

User Manual Warranty Card

Introduction

RCB-100

Name and Function

ENG

Basic Remote Control Functions

Multi-function

select button

(Select/Play/Pause)

LED Indicator Battery cover

The LG mobile wireless remote control RCB-100 with Bluetooth V4.0 provides the

following basic functions.

Function Operation LED Status

Music

Play/Pause song Press the Select button once shortly for play or pause. Green LED blinking once

Go to the next song Press the Select button twice shortly. Green LED blinking twice

Go to the rst/

previous song Press the Select button three times shortly. Green LED blinking

three times

Camera

Take photo Enter into the camera mode on a mobile phone and press

the Select button once shortly. Green LED blinking once

Take video Enter into the video mode on a mobile phone and press the

Select button once shortly. Green LED blinking once

Enter into camera

mode

Press and hold the Select button for 2 seconds or longer and

release the button.

The mobile phone enters into the camera mode.

Green LED blinking

four times

Receiving Call

Answer an

incoming call When the mobile phone rings, press the Select button once

shortly. (The default is speakerphone.) Green LED blinking once

Searching Mobile Phone

Make the phone

ring

Press the Select button ve times shortly when a mobile

phone is connected to the RCB-100. You can hear the sound

that noties of the mobile phone location.

Green LED blinking

ve times

Note: The Bluetooth wireless remote control (RCB-100) works properly when the distance

between a mobile phone and the remote control is within about 10 m.

ENG

Paring Remote Control

The wireless remote control works with a mobile phone that supports Bluetooth V4.0

and RCB-100 remote control function.

You must pair the RCB-100 remote control with a mobile phone that supports a

wireless remote control.

Pairing Remote Control

1. Insert a battery in a correct direction.

2. Press and hold the Select button of RCB-100 remote control for 6 seconds to enter

into the pairing mode. The LED indicator is blinking red and green for 1 minute in turn

and then the remote control enters into the pairing mode.

3. Turn on the Bluetooth device of the mobile phone. When you turn on the device, the

Bluetooth setting icon is displayed on the home screen of the mobile phone.

4. Go to Menu > Settings > Bluetooth > Setting and then search for a device.

5. In the list of searched devices, select “LG RCB100” and pair with it.

6. If the remote control and mobile phone are successfully paired, the green indicator is

blinking fast several times.

Note: If the connection is lost for 1 minute in the above step, the remote control exits

the paring mode.

Function

The following functions work only when the remote control is connected to a mobile phone.

Music

Press the Select button on the remote control once shortly to play or pause a song.

Press the Select button on the remote control twice shortly to go to the next song.

Press the Select button on the remote control three times shortly to return to the rst

or previous song.

Camera

Open the basic camera on a mobile phone.

Set the mode to Camera and press the Select button on the remote control once shortly.

Set the mode to Video and press the Select button on the remote control once shortly.

Note: Music function is supported only in the basic music player of a mobile phone.

How to Use

ENG

Receiving Call

When the mobile phone rings, press the Select button of the remote control once

shortly. The default is speakerphone.

Notifying Mobile Phone Location

This function helps to nd a mobile phone when the remote control is connected to

a mobile phone.

Press the Select button on the remote control ve times shortly, the mobile phone

rings through its speakerphone and also vibrates.

Note: It may not work properly if the distance between the remote control and mobile

phone is over 10 m, or the connection is lost since the Bluetooth signal between

them is weak due to the wireless environment conditions.

Low Battery

If a mobile phone is connected to the remote control and only the red indicator is

blinking when you press the Select key, it means the battery level is low.

Replace the battery with a CR2032 battery.

How to Use

Replacing Remote Control Battery

Remove the battery cover using a coin.

Remove the battery from the remote control.

Insert a new CR2032 battery with its positive pole (+) upward.

Put the battery cover back on the remote control and tighten it using a coin.

열림

Open Close

Place the positive polarity

(+) upward.

Note: The usage duration of RCB-100 may depend on the frequency of use.

Open

ENG

Function Status Operation

Pairing mode Power on The red and green LEDs are

blinking in turn.

Operation mode

Connected to a mobile

phone The green LED is blinking when

using buttons.

Not connected to a mobile

phone The red and green LEDs are

blinking shortly when using buttons.

Low power

notication Power on The red LED is blinking when

using buttons.

Problem Inspection Troubleshooting

Power fault Check if the LED turns on

during the button operation. Replace the battery or insert it in a

correct direction.

Not connected

to a mobile

phone

Check if the RCB-100 is

under the pairing mode. Press and hold the Select button for

6 seconds to switch the RCB-100 to

the paring mode.

Check if a mobile phone

supports the wireless remote

control function.

Refer to the user manual of the

mobile phone and check if a mobile

phone supports the wireless remote

control function.

Function not

work Check the connection to a

mobile phone.

If the green and red LEDs are

blinking once in turn when using

buttons, it means the connection is

lost. Try to connect again.

Keep 10 meters distance when

connecting RCB-100.

Status Indicator

Q&A on Troubleshooting

ENG

Specication

Precautions

Do not drop the device.

Do not modify, repair, or disassemble.

Do not expose directly to water, alcohol, benzene, etc for cleaning.

Do not expose directly to ammables.

Do not place or keep the device near ammables.

Keep the device away from excessive humidity and dust.

Do not place heavy objects on the device.

• Changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

• There is a risk of explosion if the battery is replaced by an incorrect type.

• Dispose of used batteries according to the instructions.

Item Description

Bluetooth specication Ver. 4.0 (Bluetooth Low Energy)

Frequency range 2.402 - 2.480 GHz

Battery CR2032 3.0V primary cell

Usage duration About 6 months (depending on the frequency of use)

IP rating JIS IPX Level 4

Operating temperature 14°F ~ 140°F (-10°C ~ 60°C)

Dimension/Weight 30.7(W) x 59.5(L) x 12.5(H) mm / 14.9g

ENG

1. Radio frequency exposure

This Bluetooth Mobile Wireless Remote Controller, RCB-100, is a radio transmitter

and receiver. When in operation it communicates with a Bluetooth®equipped

mobile device by receiving and transmitting radio frequency (RF) electromagnetic

elds (microwaves) in the frequency range 2.4 to 2.4835 GHz. The output power of

the radio transmitter is low (0.001 watts). Your Bluetooth Mobile Wireless Remote

Controller is designed to operate in compliance with the RF exposure guidelines and

limits set by national authorities and international health agencies when used any

compatible LG Electronics mobile phone.

FCC NOTICE TO USERS:

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and

(2) This device must accept any interference received, including interference that

may cause undesired operation.

IMPORTANT NOTE:

To comply with the FCC RF exposure compliance requirements, no change to

the antenna or the device is permitted. Any change to the antenna or the device

could result in the device exceeding the RF exposure requirements and void user’s

authority to operate the device.

CE NOTICE TO USERS:

Hereby, LG Electronics Inc. declares that this RCB-100 is in compliance with the

essential requirements and other relevant provisions of Directive 1999/5/EC.

Declaration of Conrmation

Additional Information

FCC ID: BEJRCB100

1177

ENG

2. Potentially explosive atmosphere

Turn off your electronic device when in any area with a potentially explosive

atmosphere. Although this is uncommon, your electronic device could generate

sparks. Sparks in such areas could cause an explosion or re resulting in bodily

injury or even death. Areas with a potentially explosive atmosphere are often, but

not always, clearly marked.

3.Battery information

Do not expose the battery to extreme temperatures, never above +70°C(+158°F)

or under -20°C(-4°F). For maximum battery capacity, use the battery at

room temperature. If the battery is used in low temperatures, the battery

capacity will be reduced. For your safety, Lithium coin batteries lodged in the

esophagus should be removed immediately. Leakage, chemical burns and

potential perforation can occur within hours of ingestion. Seek medical attention

immediately.

4. Recycling the battery in your Bluetooth®headset

The battery in your Bluetooth Mobile Wireless Remote Controller must be

disposed of properly and should never be placed in municipal waste. The LG

Electronics service partner who removes the battery will dispose of it according

to local regulations.

5. Conditions

- The warranty is valid only if the original receipt issued to the original purchaser

by the dealer, specifying the date of purchase and serial number, is presented

with the product to be repaired or replaced. LG Electronics reserves the right to

refuse warranty service if this information has been removed or changed after

the original purchase of the product from the dealer.

- If LG Electronics repairs or replaces the product, the repaired or replaced

product shall be warranted for the remaining time of the original warranty period

or for ninety (90) days from the date of repair, whichever is longer. Repair or

replacement may involve the use of functionally equivalent reconditioned units.

Replaced parts or components will become the property of LG Electronics.

- This Warranty does not cover any failure of the product due to normal wear

and tear, or due to misuse, including but not limited to use in other than the

normal and customary manner, in accordance with instructions for use and

maintenance of the product. Nor does this warranty cover any failure of the

Additional Information

Inhaltsverzeichnis

Andere LG Fernbedienung Handbücher

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung