LG LV700N-D1 Bedienungsanleitung

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere LG Sicherheitskamera Handbücher

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung

LV700N-D1

LV700P-D1

MM

9. Do not defeat the safety purpose of the polariz-9. Do not defeat the safety purpose of the polariz-

ed or grounding-type plug. A polarized plug has ed or grounding-type plug. A polarized plug has

two blades with on wider thanthe other. A grou- two blades with on wider thanthe other. A grou-

nding type plug has two blades and a third gro- nding type plug has two blades and a third gro-

unding prong. The wide blade or the third prong unding prong. The wide blade or the third prong

are provided for your safety. If the provided plug are provided for your safety. If the provided plug

does not fit into you outlet, consult an electrici- does not fit into you outlet, consult an electrici-

an for replacement of the obsolete outlet. an for replacement of the obsolete outlet.

7

8

9

10

12

13

25

Cautions for safe Operation

What’s in the box

Construction

Installation

Troubleshooting

OSD Menu

Specification

M3 Tapping Screws (4EA)

(Pan Lock Screw)

M3 Screw (1EA)

This camera must always be operated a DC 12V Certified/Listed, class 2

power supply only.

2. - Tighten the M3 Tapping Screw (A) to

fix the Ceiling Mount on the installation

label.

3. - Push the Lock Button and turn the B-

ase Deco counterclockwise simultane-

ously.

- Remove the Base Deco.

4. - Loosen the Dome Frame Lock Screw

(C).

- Remove the Dome Frame.

5. - Adjust the Tilt(Up/Down) and the Pan

(Left/Right).

6. - Install the Dome Frame.

- Tighten the Dome Frame Lock Screw

(C)

7. - Install the Base Deco.

- Turn the Base Deco clockwise.

1. - Use the installation label to check the

place that you wish to install.

Holder

OSD Board

Revolver

Service Output

FRONT

Ceiling Mount

3

Holder

Revolver

Revolver

Base

4~6

Direct Screw

FrontFront

Direct Screw

Surface Mount Cable Hole

Cut Off Celing Line

M4 Self Topping Screw

for Nount

P/N : MEZ57336601

Remove Dust On Celing

and Stick It

Dome Frame Lock Screw(C)

Dome Frame Lock Screw(B)

•

•

Connect a DC 12V power source to the Power Input Jack of the camera as

shown below.

105mm

140

96.5

① Pushing part of base arrow pointed turn the part B counter clock

simultaneously to remove the base deco.

② Roosen the lock screw to remove the dome cover

③ Widen the cover with both hands then remove the cover.

④ Adjust Near&Far, Wide&Tele as you wish Then install base deco,

screw, inner dome in reverse order.

Step2 Step3 Step4

Step1 SCREW

*If you use the video output with service output

(jack) at the same time, it may falls off the signal output

(Output)

AUTO / BW / COLOR

LENS MANUAL / DC

LENS DC

OSD MENU - LENS

LENS DC

BRIGHTNESS

: RETURN

200

Please select the type of the lens you wish to use by pressing

the LEFT or RIGHT button.

-When selecting ‘DC’ lens, the shutter speed is ‘FIXED’ mode (1/60 or 1/50)

-When selecting (MANUAL, lens, the shutter speed is ‘AUTO’)

•

DC/VIDEO : Auto iris lens selection

•

MANUAL : Manual lens selection

•

DC mode - Brightness setting(0~255 steps)

14

LENS DC

LENS DC

15

16

•

•

•

•

LENS DC

17

18

BLC AREA Setting

ALL CLEAR

ALL SET

RETURN

Cursor : Please select area.

- Yellow color is the selected area.

- Orange color is the nonselected area.

*Press the SETUP switch long. Enter with the sub set menu.

All CLEAR : Cancel the all selected area.

ALL SET : select all the area.

RETURN : Using the ‘RETURN’ key to go back to the main menu.

11

11

22

22

33

33

44

44

•

•

LENS DC

LENS DC

19

20

•

•

•

•