LG SJ4Y-S Bedienungsanleitung

OWNER’S MANUAL

Wireless

Sound Bar

Please read this manual carefully before operating

your set and retain it for future reference.

MODELS

SJ4Y (SJ4Y, SPJ4B-W)

SJ4Y-S (SJ4Y-S, SPJ4B-W)

LASC47 (LASC47, SPJ4B-W)

www.lg.com

*MFL69865798*

1 Getting Started

Getting Started2

Getting Started

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral

triangle is intended to alert the

user to the presence of uninsulated

dangerous voltage within the

product’s enclosure that may be of

sufcient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

CAUTION: The apparatus should not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, should be placed on the

apparatus.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around

this product. (ex. Electrical swatter) This product may

malfunction due to electrical shock.

CAUTION: No naked ame sources, such as lighted

candles, should be placed on the apparatus.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of

the product and to protect it from over heating.

The openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

Getting Started 3

Getting Started

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In case

of an emergency, the Power Plug must remain readily

accessible.

Check the specication page of this owner’s manual

to be certain of the current requirements.

Do not overload wall outlets. Overloaded wall outlets,

loose or damaged wall outlets, extension cords, frayed

power cords, or damaged or cracked wire insulation

are dangerous. Any of these conditions could result

in electric shock or re. Periodically examine the

cord of your device, and if its appearance indicates

damage or deterioration, unplug it, discontinue use of

the device, and have the cord replaced with an exact

replacement part by an authorized service center.

Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched, closed

in a door, or walked upon. Pay particular attention to

plugs, wall outlets, and the point where the cord exits

the device.

NOTICE: For safety marking information including

product identication and supply ratings, please refer

to the main label on the bottom or the other surface

of the product.

This device is equipped with a portable battery or

accumulator.

How to Safely remove the battery or the battery

pack from the equipment:

To remove the old battery or battery pack, follow

the assembly steps in reverse order. To prevent

contamination of the environment and bring on

possible threat to human and animal health, the

old battery or the battery put it in the appropriate

container at designated collection points. Do not

dispose of batteries or battery pack together

with other waste. It is recommended that you use

local, free reimbursement systems batteries and

accumulators. The battery shall not be exposed to

excessive heat such as sunshine, re or the like.

For models using an adapter

Only use the AC adapter supplied with this device.

Do not use a power supply from another device or

another manufacturer. Using any other power cable

or power supply may cause damage to the device and

void your warranty.

Getting Started4

Getting Started

Symbols

~Refers to alternating current (AC).

0Refers to direct current (DC).

Refers to class II equipment.

1Refers to stand-by.

!Refers to “ON” (power).

Refers to dangerous voltage.

OPEN SOURCE SOFTWARE NOTICE

INFORMATION

To obtain the source code under GPL, LGPL, MPL, and

other open source licenses, that is contained in this

product, please visit

http://opensource.lge.com.

In addition to the source code, all referred license

terms, warranty disclaimers and copyright notices are

available for download.

LG Electronics will also provide open source code to

you on CD-ROM for a charge covering the cost of

performing such distribution (such as the cost of

media, shipping and handling) upon email request

to [email protected]om. This offer is valid for three

(3) years from the date on which you purchased the

product.

Table of Contents 5

Table of Contents

1 Getting Started

2 Safety Information

6 Unique features

6 Introduction

6 – Symbols used in this manual

7 Remote control

8 Front panel

8 Rear panel

9 About LED condition

10 Installing the sound bar

10 Mounting the main unit on a wall

12 Positioning the speakers (Optional)

2 Connecting

13 Connecting the AC Adapter

13 Wireless subwoofer and rear speaker (Sold

Separately) connection

13 – Wireless subwoofer connection

15 – Rear speakers connection

(Sold Separately)

16 – Surround sound

17 – How to Affix the Ferrite Core

18 Connecting to your TV

18 – Using an OPTICAL cable

18 – LG Sound Sync

20 – Using an HDMI cable

21 – Additional information for HDMI

22 Optional equipment connection

22 – HDMI connection

23 – OPTICAL IN connection

23 – PORTABLE IN connection

24 – USB connection

24 – Compatible USB devices

24 – USB device requirement

25 – Playable file

3 Operating

26 Basic operations

26 – USB operation

26 Other operations

26 – Turn off the sound temporarily

26 – Using your TV remote control

27 – Auto power down

27 – AUTO POWER On/Off

28 – Auto function change

28 – Quick Start

29 Using BLUETOOTH® technology

29 – Listening to music stored on the

BLUETOOTH devices

31 Using BLUETOOTH App

31 – Install “Music Flow Bluetooth” App onto

Your BLUETOOTH Device

31 – Activate Bluetooth with “Music Flow

Bluetooth” App

33 Sound adjustment

33 – Setting sound effect

33 – Adjust the subwoofer level settings

33 – Adjust the rear speakers level settings

(Optional)

4 Troubleshooting

34 Troubleshooting

34 – General

35 – NOTES to use wireless

36 – NOTES to release Demo mode

5 Appendix

37 Trademarks and licenses

38 Specifications

40 Maintenance

40 – Handling the unit

Getting Started6

Getting Started

Unique features

Auto power down

This unit will turn off by itself for energy saving

consumption.

LG Sound Sync

Controls volume level of this unit by the remote

control of your LG TV that is compatible with LG

Sound Sync.

BLUETOOTH®

Listens to music stored on your Bluetooth device.

Surround sound

You can enjoy surround sound by using Wireless Rear

Speakers kit. (SPJ4-S)

Introduction

Symbols used in this manual

, Note

Indicates special notes and operating features.

> Caution

Indicates cautions for preventing possible damages

from abuse.

Getting Started 7

Getting Started

Remote control

Replacement of Battery

Remove the battery cover on the rear of the remote

control, and insert the battery with and

matched correctly.

• • • • • • • • • • • • • • a• • • • • • • • • • • • •

1 (Power) : Switches the unit ON or OFF.

F: Selects the function and the input source.

ASC : Analyzes the property of input sound and

provides the sound optimized for the content in real

time.

BASS BLAST :

- Selects reinforced bass sound.

- Turns on using your tv remote control function

(Refer to the page 26.)

CINEMA :

- Selects cinematic surround sound.

- Turns off using your tv remote control function

(Refer to the page 26.)

VOL o/p: Adjusts speaker volume.

(Mute) : Mutes the sound.

• • • • • • • • • • • • • • b• • • • • • • • • • • • •

C/V (Skip/Search) :

- Skips Fast backward or Forward.

- Searches for a section within a le.

dM (Play/Pause) : Starts playback. / Pauses playback.

REAR LEVEL o/p:

- Adjusts sound level of rear speakers.

- Turns on or off Surround function. (Refer to the

page 16.)

WOOFER LEVEL o/p: Adjusts sound level of

subwoofer.

AUTO POWER ON/OFF :

- Turns on or off AUTO POWER function. (Refer to

the page 27)

- Turns on or off the Bluetooth connection lock.

(Refer to the page 30.)

Getting Started8

Getting Started

Remote sensor

Standby LED (Red)

Function LED (White)

The buttons are located on the rear.

Front panel

Ao/p: (Volume) : Adjusts volume level

F (Function) : Selects the function and input

source.

1/! (Standby/On)

BDC IN : AC adapter input

COPTICAL IN : Optical input

DPORTABLE IN : Portable input

EUSB

FHDMI OUT (TV ARC) / IN : HDMI output / input

Rear panel

Getting Started 9

Getting Started

About LED condition

LED Condition Description

OPTICAL LED turns on. OPTICAL function is selected.

OPTICAL LED blinks twice and

turns on.

LG sound sync (Optical) function is

selected.

USB LED turns on. USB function is selected.

USB LED blinks. Paused USB playback.

BT (Bluetooth) LED turns on. Paired with Bluetooth device.

BT (Bluetooth) LED blinks. Waiting for Bluetooth connection.

LG TV LED turns on. LG Sound Sync (Wireless) function is

selected.

HDMI IN LED turns on. HDMI IN function is selected.

LG TV and HDMI IN LEDs turn

on. PORTABLE function is selected.

USB and BT (Bluetooth) LEDs

turn on. ARC function is selected

yWhen you press any button, standby LED (Red) on the main unit blinks.

yWhen you press (Mute) button, standby LED (Red) blinks slowly.

yWhen this unit reaches minimum volume, standby LED (Red) turns on for 2 seconds and blinks slowly.

yWhen this unit reaches maximum volume, standby LED (Red) turns on for 2 seconds.

yWhen you press volume (o/p) button continually, standby LED (Red) blinks quickly.

, Note

Getting Started10

Getting Started

Installing the sound bar

You can hear the sound by connecting the unit to the

other device : TV, Blu-ray disc player, DVD player, etc.

Place the unit in front of the TV and connect it to the

device you want. (Refer to pages 18 - 25.)

yFor best performance of wireless connection

such as Bluetooth or wireless subwoofer,

do not install the unit on Metallic furniture

because wireless connection communicates

through a module positioned on the bottom

of the unit.

yBe careful not to make scratches on the

surface of the Unit / Subwoofer when

installing or moving them.

> Caution

Mounting the main unit

on a wall

You can mount the main unit on a wall.

Because it is difcult to make a connection after

installing this unit, you should connect the cables

before installation.

> Caution

Preparation materials

Unit

Wall bracket install guide

Screws

Screws (A)

Wall plug

Wall brackets

(Not supplied)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung