LG SK1 Bedienungsanleitung

OWNER’S MANUAL

Sound Bar

Please read this manual carefully before operating your set and

retain it for future reference.

MODEL

SK1

www.lg.com

1 Getting Started

Getting Started

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral

triangle is intended to alert the

user to the presence of uninsulated

dangerous voltage within the

product’s enclosure that may be of

sufcient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

CAUTION: The apparatus should not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, should be placed on the

apparatus.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around

this product. (ex. Electrical swatter) This product may

malfunction due to electrical shock.

CAUTION: No naked ame sources, such as lighted

candles, should be placed on the apparatus.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of

the product and to protect it from over heating.

The openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

Getting Started

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In case

of an emergency, the Power Plug must remain readily

accessible.

Check the specication page of this owner’s manual

to be certain of the current requirements.

Do not overload wall outlets. Overloaded wall outlets,

loose or damaged wall outlets, extension cords, frayed

power cords, or damaged or cracked wire insulation

are dangerous. Any of these conditions could result

in electric shock or re. Periodically examine the

cord of your device, and if its appearance indicates

damage or deterioration, unplug it, discontinue use of

the device, and have the cord replaced with an exact

replacement part by an authorized service center.

Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched, closed

in a door, or walked upon. Pay particular attention to

plugs, wall outlets, and the point where the cord exits

the device.

NOTICE: For safety marking information including

product identication and power supply ratings,

please refer to the main label on the bottom or the

other surface of the product.

This device is equipped with a portable battery or

accumulator.

How to Safely remove the batteries or the

battery pack from the equipment: To Remove the

old batteries or battery pack, follow the assembly

steps in reverse order. To prevent contamination of

the environment and bring on possible threat to

human and/or animal health, the old batteries or the

battery pack must be put in an appropriate container

at designated collection points. Do not dispose

of batteries or battery pack together with other

waste. It is recommended that you use local, free

reimbursement systems batteries or battery packs,

(may not be available in your area). The batteries or

the battery pack should not be exposed to excessive

heat such as sunshine, re or the like.

Getting Started

Symbols

~Refers to alternating current (AC).

0Refers to direct current (DC).

Refers to class II equipment.

1Refers to stand-by.

!Refers to “ON” (power).

Refers to dangerous voltage.

Table of Contents

1 Getting Started

2 Safety Information

6 Unique features

6 Introduction

6 – Symbols used in this manual

7 Remote control

8 Front panel

8 Rear panel

9 About LED condition

11 Installing the sound bar

12 Mounting the main unit on a wall (Optional)

2 Connecting

14 Organizing cables (Optional)

14 Connecting to your TV

14 – Using an OPTICAL cable

15 – LG Sound Sync (Optical)

16 Optional equipment connection

16 – OPT. IN connection

16 – PORT. IN connection

3 Operating

17 Operations

17 – DRC (Dynamic Range Control)

17 – Turn off the sound temporarily

17 – Using your TV remote control

17 – Auto power down

18 – AUTO POWER On/Off

19 – Auto function change

20 Using BLUETOOTH® technology

20 – Listening to music stored on the Bluetooth

devices

22 Sound adjustment

4 Troubleshooting

23 Troubleshooting

23 – General

24 – NOTES to use wireless

5 Appendix

25 Trademarks and licenses

26 Specifications

27 Maintenance

27 – Handling the unit

Getting Started

Unique features

Auto power down

This unit supports to turn off by itself for saving

energy consumption.

Portable In

Listen to music from your portable device.

(MP3 player, Notebook, Smart phone, etc..)

BLUETOOTH®

Listens to music stored on your Bluetooth device.

Introduction

Symbols used in this manual

, Note

Indicates special notes and operating features.

> Caution

Indicates cautions for preventing possible damages

from abuse.

Getting Started

Remote control

Replacement of battery

Remove the battery cover on the rear of the remote

control, and insert battery with and matched

correctly.

• • • • • • • • • • • • • • a • • • • • • • • • • • • •

1(Standby) : Switches the unit ON or OFF

OPTICAL :

- Selects the optical function and source.

- Turns on the Bluetooth connection lock function.

(Page 21)

STANDARD :

- Selects standardized sound.

- Turns on AUTO POWER function. (Page 18)

PORT.IN (Portable in) :

- Selects the portable function and source.

- Turns off the Bluetooth connection lock function.

(Page 21)

(Mute) :

- Mutes the sound.

- Turns off AUTO POWER function. (Page 18)

(Bluetooth) : Selects the Bluethooth function

and source.

VOL o/p: Adjusts speaker volume.

• • • • • • • • • • • • • • b • • • • • • • • • • • • •

BASS BLAST: Reinforces the bass and powerful

sound.

DRC ON/OFF :

- Turns on or off DRC function. (Page 17)

- Controls this unit using TV remote. (Page 17)

Getting Started

Remote sensor

State LED

Bluetooth LED

This unit operates only with the remote control.

, Note

Front panel

Rear panel

A USB (Service only) : S/W download connector.

BPORT.IN (Portable) : Connect to a Portable

device.

COPT. IN (Optical) : Connect to an Optical device.

DWall mount hole : You can mount the sound bar

on a wall. (Page 12-13)

Be careful to make sure children do not put their

hands or any objects into the *speaker duct.

* speaker duct : A hole for plentiful bass sound

on speaker cabinet (enclosure)

> Caution

Getting Started

About LED condition

: White LED is staying on. : White LED is blinking. : LED is off.

: Color LED is staying on. : Color LED is blinking.

LED Condition Description

(White) State LED (White) turns on. Optical function is selected.

(White)

State LED (White) blinks twice and

turns on.

LG Sound Sync (Optical) function is

selected.

(Blue)

Bluetooth LED (Blue) blinks.

Slow blink : Waiting for Bluetooth

connection.

Quick blink : Connecting Bluetooth.

(Blue) Bluetooth LED (Blue) turns on. Paired with Blutooth device.

(Green) State LED (Green) turns on. Portable function is selected.

yWhen you press any button, State LED (Red) on the main unit blinks.

yWhen you press (Mute) button, State LED (White) and Bluetooth LED (White) blink slowly.

yWhen this unit reaches minimum volume, State LED (White) and Bluetooth LED (White) turn on for 2

seconds and blink slowly.

yWhen this unit reaches maximum volume, State LED (White) and Bluetooth LED (White) turn on for 2

seconds.

yWhen you press volume (o/p) button continually, State LED (Red) blinks quickly.

, Note

Getting Started

Useful functions for using the unit

Function Description To do Do this

TV Remote On/

Off

(Page 17)

It allows you to control the

volume of this unit by your TV

remote control even by other

company’s product.

Initial setting of this function

was set to on.

ON Press and hold DRC ON on the remote

control for about 2 seconds.

The State LED (White) and Bluetooth LED

(White) blink twice.

OFF Press and hold DRC OFF on the remote

control for about 2 seconds.

The State LED (White) and Bluetooth LED

(White) blink twice.

BT Lock On/Off

(Page 21)

It allows you to connect a

Bluetooth deivce only on

Bluetooth function.

Initial setting of this function

was set to off.

ON Press and hold OPTICAL on the remote

control for about 2 seconds in Bluetooth

function.

The State LED (White) and Bluetooth LED

(White) blink twice.

OFF Press and hold PORT.IN on the remote

control for about 2 seconds in Bluetooth

function.

The State LED (White) and Bluetooth LED

(White) blink twice.

Auto Power

On/Off

(Page 18)

It allows the unit to turn on

and off automatically by input

signals :

Optical, Bluetooth.

Initial setting of this function

was set to on.

ON Press and hold STANDARD on the remote

control for about 2 seconds.

The State LED (White) and Bluetooth LED

(White) blink twice.

OFF Press and hold (Mute) on the remote

control for about 2 seconds.

The State LED (White) and Bluetooth LED

(White) blink twice.

Andere Handbücher für SK1

Inhaltsverzeichnis

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung