LG SPD75YA Bedienungsanleitung

OWNER’S MANUAL

Wi-Fi

SOUND BAR

Please read this manual carefully before operating your set and retain it for future

reference.

Model

SPD75YA (SPD75YA, SPN8-W)

2104_Rev01

www.lg.com

Sound Bar Quick Guide

Installing and using the Product

aConnect the sound bar to your TV via an optical cable or an HDMI

cable.

HDMI OUT

HDMI IN

(ARC)

HDMI IN OPTICAL

OUT

ASound bar

BRemote Control Receiver / Status Display

CRear Speakers / Wireless Receiver (Sold

separately, SPK8-S)

DWireless Subwoofer - Install it close to the sound

bar.

EExternal Device - (Blu-ray player, game console,

etc.)

Soundbar Quick Guide

b If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the sound bar via an

HDMI cable.

c If you purchased the rear speakers and wireless receiver separately, connect the rear speakers to the wireless

receiver via a speaker cable. When connecting the rear speakers to the wireless receiver, connect the black

striped cable to the negative terminal of each speaker and the remaining cable to the positive terminal of

each speaker.

dConnect to power in the following order: wireless subwoofer [wireless receiver [sound bar. Then, turn on

the sound bar. When the connection is automatically established with the sound bar, the LEDs on the wireless

subwoofer and the wireless receiver will light up in green. ([See “Connecting the Product” on page 6.)

eUsing the product with your TV ([See “Connecting to the TV”

on page 30.)

APress the Function button repeatedly until “OPT/HDMI ARC” appears on the status display.

BOn your TV's settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].

CWhen the TV is properly connected to the product, “OPT”, “ ARC”, or “E-ARC” will appear on the status display

with a sound.

fConnecting the product to your smartphone via Wi-Fi ([See

“Connecting with a Smartphone via Wi-Fi” on page 16.)

AConnect your smartphone to Wi-Fi.

BInstall the LG Sound Bar app on Google Play or the App Store.

CRun the LG Sound Bar app and follow the instructions.

DThe product will connect to your smartphone and you can control the product with LG Sound Bar app.

gConnecting the product to your smartphone via Bluetooth ([

See “Connecting via Bluetooth” on page 38.)

ATap the Settings button on your smartphone and select Bluetooth. Turn on the Bluetooth function. (

Off > On)

BPress the Bluetooth pair button. After a moment, you will see “BT READY” on the status display.

CFind and tap “LG_Speaker_SPD75YA_XXXX” or the name you registered on the Google Home app.

DWhen the product is connected to your smartphone via Bluetooth, you can see the status display change

from “PAIRED” [“Connected Bluetooth device name” [“BT”.

Manually connecting the sound bar to the wireless subwoofer or wireless

receiver ([See “Connecting the wireless subwoofer manually”, “Manual

connection” on page 8, 10.)

If you see a red LED on the back of the wireless subwoofer or on the front of the wireless receiver, it means

that the sound bar is not connected to the speakers. If this is the case, connect them in the following order.

APress the Power button on the sound bar to turn it off.

BPress the PAIRING (Pairing) button on the back of the disconnected wireless subwoofer or wireless

receiver. Check if each LED blinks green.

- If you still see a red LED on the back of the wireless subwoofer, press and hold the button on the

back of the subwoofer again.

CPress the Power button on the sound bar to turn it on.

DWhen the connection is established, you will see a green LED light on the back of the wireless

subwoofer or on the front of the wireless receiver light up in green.

Table of Contents

Sound Bar Quick Guide

2Installing and using the Product

Installation

6Connecting the Product

16 Connecting with a Smartphone via Wi-Fi

19 Resetting the Product

Exploring the Product

20 Front

22 Back

23 Exploring Remote Control

Connecting to the TV

30 Connecting with an Optical Cable

32 Connecting with an HDMI Cable

34 Connecting via Bluetooth

Connecting to an External Device

35 Connecting with an HDMI Cable

37 Connecting with an Optical Cable

Using the Product as an Audio

System

38 Connecting via Bluetooth

41 Connecting to a USB Storage Device

43 Using the LG Sound Bar app

44 Compatible with Google Assistant

45 Works with Apple AirPlay

46 Spotify Connect

47 Works with Alexa

Mounting the Product to a Wall

50 Mounting the Product to a Wall

Safety Precautions

52 Safety and Regulatory

Before Reporting Product

Malfunction

55 Troubleshooting

Appendix

59 Specications

61 Registered Trademarks and Licenses

62 What You Need to Know about Network

Services

62 Open Source Software Notice Information

63 Handling the Product

Installation

Connecting the Product

You can enjoy a richer sound by connecting the sound bar to the wireless subwoofer.

Connecting the wireless subwoofer automatically

After completing installation, the wireless subwoofer will automatically be connected to the sound bar. Connect

the sound bar to the subwoofer in the following order.

a Plug the power cable into the wireless subwoofer.

b Plug the power cable connected to the wireless subwoofer into an outlet.

c Plug the power cable into the AC adapter.

d Connect the AC adapter cable to the DC IN (AC adapter input) terminal on the back of the product.

e Plug the power cable connected to the AC adapter into an outlet.

f When the connection is automatically established, you will see the LED on the back of the wireless subwoofer

light up in green.

Note • Make sure to use the provided AC adapter. Using other AC adapters may lead to malfunction

and will forfeit the product warranty.

Installation

Checking the connection with the LED on the back of the wireless

subwoofer

You can check the connection status by looking at the LED on the back of the wireless subwoofer.

LED Colour Status

Blinking green Connecting in progress

Green Connected successfully

Red Bad connection, or the subwoofer is in standby

Off Power cable not connected

Connecting the wireless subwoofer manually

If you see a red LED on the back of the wireless subwoofer, it means that the sound bar is not connected to the

subwoofer. If this is the case, connect them in the following order.

a Press the Power button on the sound bar to turn it off.

b Press the Pairing button on the back of the wireless subwoofer. Check if the LED on the back of the

subwoofer is blinking green. If you still see a red LED on the wireless subwoofer, press and hold the button on

the back of the subwoofer again.

c Press the Power button on the sound bar to turn it on.

d When the connection is established, you will see the LED light on the back of the wireless subwoofer light up

in green.

Note • Install the sound bar as close to the wireless subwoofer as possible. The closer the distance

between the sound bar and the wireless subwoofer, the better the sound quality.

• Please ensure there are no obstacles between the sound bar and the wireless subwoofer.

• To prevent wireless interference, maintain a distance of at least 1 m between the sound bar

or the wireless subwoofer and any peripheral devices that generate strong electromagnetic

waves (ex. wireless routers, microwave ovens, etc.).

Connecting the rear speakers to the wireless receiver (SPK8-S, sold

separately)

Automatic connection

After completing installation, the wireless receiver will automatically be connected to the sound bar. Connect the

sound bar to the wireless receiver in the following order.

a Connect the speaker cables to the corresponding terminals on the rear speakers (left, right).

Connect the black striped cable to the negative terminal and the other cable to the positive terminal.

b Connect the speaker cables on the rear speakers (left, right) to the wireless receiver.

Receiver Terminal Colour Speaker Position

Blue LLeft rear

Grey RRight rear

c Plug the wireless receiver power cable into an outlet.

d Press the Power button on the sound bar to turn it on.

e When the connection is automatically established, you will see the LED on the front of the wireless receiver

light up in green.

Note • Please only use the speakers provided with the product. Using other speakers may cause

malfunction.

• Connect the speaker cables to the corresponding terminals. Connect to the positive cable

to the positive terminal and the negative cable to the negative terminal. An incorrectly

connected cable will distort the sound or produce no bass.

Checking connection status with the LED colour

You can check the connection status with the LED on the front of the wireless receiver.

LED Colour Status

Blinking green Connecting In progress

Green Connected successfully

Red Bad connection, or the receiver is in standby

Off Power cable not connected

Manual connection

If you see a red LED on the front of the wireless receiver, it means that the sound bar is not connected to the

receiver. If this is the case, connect them in the following order.

a Press the Power button on the sound bar to turn it off.

b Press the PAIRING button on the back of the wireless receiver. Check if the LED on the front of the wireless

receiver is blinking green.

c Press the Power button on the sound bar to turn it on.

d When the connection is established, you will see the LED light on the front of the wireless receiver light up in

green.

Note • Keep the rear speakers at least 30 cm away from the TV or monitor.

• To prevent wireless interference, maintain a distance of at least 1 m between the sound bar

or the wireless receiver and any peripheral devices that generate strong electromagnetic

waves (ex. wireless routers, microwave ovens, etc.).

Andere Handbücher für SPD75YA

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung