LG USC9S Bedienungsanleitung

OWNER’S MANUAL

Wi-Fi

SOUND BAR

Please read this manual carefully before operating your set and retain it for future

reference.

Model

USC9S (USC9S, SPS8-W)

2212_Rev01

www.lg.com

Sound Bar Quick Guide

Installing and using the Product

a Connect the sound bar to your TV via an optical cable or an HDMI

cable.

HDMI OUT

OPTICAL INHDMI™ ▶ TV

(eARC/ARC)

HDMI™ IN

HDMI IN

(ARC) OPTICAL

OUT

A Sound bar

B Remote Control Receiver

C Status LED (ABC)

D Rear Speakers / Wireless Receiver (Sold separately, SPQ8-S)

E Wireless Subwoofer - Install it close to the sound bar.

F External Device - (Blu-ray player, game console, etc.)

Soundbar Quick Guide

b If you are using an external device (ex. Set-top box, Blu-ray player, game console, etc.), connect it to the sound

bar or to the TV via an HDMI cable.

c If you purchased the rear speakers and wireless receiver separately, connect the rear speakers to the wireless

receiver via a speaker cable. When connecting the rear speakers to the wireless receiver, connect the black

striped cable to the negative terminal of each speaker and the remaining cable to the positive terminal of

each speaker.

d Connect to power in the following order: wireless subwoofer [wireless receiver [sound bar. Then, turn on

the sound bar. When the connection is automatically established with the sound bar, the LEDs on the wireless

subwoofer and the wireless receiver will light up green. ([See “Connecting the Product” on page 6.)

e Using the product with your TV ([See “Connecting with an

Optical Cable”, “Connecting with an HDMI Cable”, “Connecting

via Bluetooth”, “Connecting an external device via HDMI A” on

page 36, 38, 40, 41.)

A Press the Function button repeatedly until LED1 and LED2 light up white. If you are using an external

device that is connected to HDMI™ IN on the sound bar, press the Function button repeatedly until LED1

and LED3 light up white.

B On your TV's settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].

f Connecting the product to your smartphone via Wi-Fi ([See

“Connecting with a Smartphone via Wi-Fi” on page 17.)

A Connect your smartphone to Wi-Fi.

B Install the LG Sound Bar app on Google Play or the App Store.

C Run the LG Sound Bar app and follow the instructions.

D The product will connect to your smartphone and you can control the product with LG Sound Bar app.

g Connecting the product to your smartphone via Bluetooth ([

See “Connecting via Bluetooth” on page 45.)

A Tap the Settings button on your smartphone and select Bluetooth. Turn on the Bluetooth function.

( Off > On)

B Press the Bluetooth pair button. After a moment, LED2 blinks blue.

C Find and tap “LG_Speaker_USC9S_XXXX” or the name you registered on the Google Home app.

D When the product is connected to your smartphone via Bluetooth, all LEDs light up blue.

Manually connecting the sound bar to the wireless subwoofer or wireless

receiver ([See “Connecting the wireless subwoofer manually”, “Manual

connection” on page 8, 10.)

If you see a red LED on the wireless subwoofer or on the front of the wireless receiver, it means that the

sound bar is not connected to the speakers. If this is the case, connect them in the following order.

A Press the Power button on the sound bar to turn it off.

B Press the Pairing (PAIRING) button on the back of the disconnected wireless subwoofer or wireless

receiver. Check if each LED blinks green.

- If you still see a red LED on the wireless subwoofer, press and hold the button on the back of the

subwoofer again.

C Press the Power button on the sound bar to turn it on.

D When the connection is established, you will see a green LED light on the wireless subwoofer or on

the front of the wireless receiver light up green.

Table of Contents

Sound Bar Quick Guide

2Installing and using the Product

Installation

6Connecting the Product

17 Connecting with a Smartphone via Wi-Fi

21 Resetting the Product

Exploring the Product

22 Front

27 Back

28 Exploring Remote Control

Various settings for convenience

31 Convenient functions

32 How to change the settings

34 Sound tuning

35 Voice feedback function

Connecting to the TV

36 Connecting with an Optical Cable

38 Connecting with an HDMI Cable

40 Connecting via Bluetooth

Connecting to an External Device

41 Connecting with an HDMI Cable

44 Connecting with an Optical Cable

Using the Product as an Audio

System

45 Connecting via Bluetooth

48 Connecting to a USB Storage Device

50 Using the LG Sound Bar app

51 Compatible with Google Assistant

52 Works with Apple AirPlay

53 Spotify Connect

54 Works with Alexa

55 Tidal Connect

Installing the Product with a LG

59 Preassembly

62 Mounting the Sound bar with the TV to a

Wall

63 Standing the Sound bar with the TV

65 Disassemble

Safety Precautions

66 Safety and Regulatory

69 Prevention of product misuse

Before Reporting Product

Malfunction

73 Troubleshooting

Appendix

79 Specifications

81 Registered Trademarks and Licenses

83 What You Need to Know about Network

Services

83 Open Source Software Notice Information

84 Handling the Product

Installation

Connecting the Product

You can enjoy a richer sound by connecting the sound bar to the wireless subwoofer.

Connecting the wireless subwoofer automatically

After completing installation, the wireless subwoofer will automatically be connected to the sound bar. Connect

the sound bar to the subwoofer in the following order.

a Plug the power cable into the wireless subwoofer.

b Plug the power cable connected to the wireless subwoofer into an outlet.

c Plug the power cable into the AC adapter.

d Connect the AC adapter cable to the DC IN (AC adapter input) terminal on the back of the product.

e Plug the power cable connected to the AC adapter into an outlet.

f When the connection is automatically established, you will see the LED on the wireless subwoofer light up

green.

Note

• Make sure to use the provided AC adapter. Using other AC adapters may lead to malfunction and will forfeit the

product warranty.

Installation

Checking the connection with the LED on the wireless subwoofer

You can check the connection status by looking at the LED on the wireless subwoofer.

LED Colour Status

Blinking green Connecting in progress

Green Connected successfully

Red Bad connection, or the subwoofer is in standby

Off Power cable not connected

Connecting the wireless subwoofer manually

If you see a red LED on the wireless subwoofer, it means that the sound bar is not connected to the subwoofer. If

this is the case, connect them in the following order.

a Press the Power button on the sound bar to turn it off.

b Press the Pairing button on the wireless subwoofer. Check if the LED on the subwoofer is blinking green. If

you still see a red LED on the wireless subwoofer, press and hold the button on the back of the subwoofer

again.

c Press the Power button on the sound bar to turn it on.

d When the connection is established, you will see the LED light on the wireless subwoofer light up green.

Note

• Install the sound bar as close to the wireless subwoofer as possible. The closer the distance between the sound

bar and the wireless subwoofer, the better the sound quality.

• Please ensure there are no obstacles between the sound bar and the wireless subwoofer.

• To prevent wireless interference, maintain a distance of at least 1 m between the sound bar or the wireless

subwoofer and any peripheral devices that generate strong electromagnetic waves (ex. wireless routers,

microwave ovens, etc.).

Connecting the rear speakers to the wireless receiver (SPQ8-S, sold

separately)

Automatic connection

After completing installation, the wireless receiver will automatically be connected to the sound bar. Connect the

sound bar to the wireless receiver in the following order.

a Connect the speaker cables to the corresponding terminals on the rear speakers (left, right). Connect the

black striped cable to the negative terminal and the other cable to the positive terminal.

b Connect the speaker cables on the rear speakers (left, right) to the wireless receiver.

Receiver Terminal Colour Speaker Position

Blue LLeft rear

Grey RRight rear

c Plug the power cable into the wireless receiver.

d Plug the power cable connected to the wireless receiver into an outlet.

e Press the Power button on the sound bar to turn it on.

f When the connection is automatically established, you will see the LED on the front of the wireless receiver

light up green.

Note

• Please only use the speakers provided with the product. Using other speakers may cause malfunction.

• Connect the speaker cables to the corresponding terminals. Connect to the positive cable to the positive

terminal and the negative cable to the negative terminal. An incorrectly connected cable will distort the sound

or produce no bass.

• Connect the product to the speakers and cables provided at the time of product purchase.

- If you connect the product to speakers or cables other than those provided at the time of product purchase,

there can be a deterioration of sound quality or a speaker malfunction.

• When you connect speakers to the product, connect only one speaker to the output port that fits the speaker.

- If you connect multiple speakers to one output port, it may cause a product or speaker malfunction.

Checking connection status with the LED colour

You can check the connection status with the LED on the front of the wireless receiver.

LED Colour Status

Blinking green Connecting In progress

Green Connected successfully

Red Bad connection, or the receiver is in standby

Off Power cable not connected

Manual connection

If you see a red LED on the front of the wireless receiver, it means that the sound bar is not connected to the

receiver. If this is the case, connect them in the following order.

a Press the Power button on the sound bar to turn it off.

b Press the PAIRING button on the back of the wireless receiver. Check if the LED on the front of the wireless

receiver is blinking green.

c Press the Power button on the sound bar to turn it on.

d When the connection is established, you will see the LED light on the front of the wireless receiver light up

green.

Note

• Keep the rear speakers at least 30 cm away from the TV or monitor.

• To prevent wireless interference, maintain a distance of at least 1 m between the sound bar or the wireless

receiver and any peripheral devices that generate strong electromagnetic waves (ex. wireless routers,

microwave ovens, etc.).

Andere Handbücher für USC9S

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung