LG PJ9 Bedienungsanleitung

OWNER’S MANUAL

Portable

Bluetooth

Speaker

Please read this manual carefully before operating

your set and retain it for future reference.

MODELS

PJ9 (PJ9, PJS9W) PJ9B (PJ9B, PJS9WB)

www.lg.com

1 Getting Started

Getting Started

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral triangle

is intended to alert the user to the

presence of uninsulated dangerous

voltage within the product’s

enclosure that may be of sufcient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing) instructions

in the literature accompanying the

product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

CAUTION: The apparatus should not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, should be placed on the

apparatus.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around

this product. (ex. Electrical swatter) This product may

malfunction due to electrical shock.

CAUTION: No naked ame sources, such as lighted

candles, should be placed on the apparatus.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of

the product and to protect it from over heating.

The openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

Getting Started

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In case

of an emergency, the Power Plug must remain readily

accessible.

Check the specication page of this owner’s manual

to be certain of the current requirements.

Do not overload wall outlets. Overloaded wall outlets,

loose or damaged wall outlets, extension cords, frayed

power cords, or damaged or cracked wire insulation

are dangerous. Any of these conditions could result

in electric shock or re. Periodically examine the

cord of your device, and if its appearance indicates

damage or deterioration, unplug it, discontinue use of

the device, and have the cord replaced with an exact

replacement part by an authorized service center.

Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched, closed

in a door, or walked upon. Pay particular attention to

plugs, wall outlets, and the point where the cord exits

the device.

NOTICE: For safety marking information including

product identication and supply ratings, please refer

to the main label on the bottom or the other surface

of the product.

CAUTION when using this product in environments

of low humidity

yIt may cause static electricity in environments of

low humidity.

yIt is recommended to use this product after

touching any metal object which conducts

electricity.

For models using an adapter

Only use the AC adapter supplied with this device.

Do not use a power supply from another device or

another manufacturer. Using any other power cable

or power supply may cause damage to the device and

void your warranty.

Getting Started

This device is equipped with a portable battery or

accumulator.

How to Safely remove the battery or the battery

pack from the equipment: To remove the old battery

or battery pack, follow the assembly steps in reverse

order. To prevent contamination of the environment

and bring on possible threat to human and animal

health, the old battery or the battery put it in the

appropriate container at designated collection points.

Do not dispose of batteries or battery pack together

with other waste. It is recommended that you use

local, free reimbursement systems batteries and

accumulators. The battery shall not be exposed to

excessive heat such as sunshine, re or the like.

Symbols

~Refers to alternating current (AC).

0Refers to direct current (DC).

Refers to class II equipment.

1Refers to stand-by.

!Refers to “ON” (power).

Refers to dangerous voltage.

Table of Contents

1 Getting Started

2 Safety Information

6 Unique features

6 Introduction

7 Speaker

8 Woofer station

2 Connecting

9 Connecting the AC Adapter

9 Speaker and Woofer station connection

3 Operating

12 Charging the speaker

12 – Auto wireless charging

12 – Charging with the AC adapter

13 – Checking the charging status

13 – Checking Battery status

14 Levitating

15 Charging mobile device

16 Basic Operations

16 – Using power button

16 – Bluetooth Connection

16 – Bluetooth LED status

17 – Simple Operation Guide

18 Handsfree Function

19 Listening to Music from Your External Device

20 Using BLUETOOTH® technology

20 – Listening to music stored on the

BLUETOOTH devices

22 Multi Pairing

23 Dual Play Connection (Optional)

25 Other Operation

25 – Initializing

25 – Resetting

25 – Notice for Auto Power Off

4 Troubleshooting

26 Troubleshooting

5 Appendix

27 Trademarks and Licenses

27 Handling the Unit

28 Specifications

Table of Contents

Getting Started

Unique features

Auto power down

This unit supports to turn off by itself for saving

energy consumption. (Page 25)

Portable In

Listen to music from your portable device.

(Smart phone, Notebook, etc..)

BLUETOOTH®

Listens to music stored on your Bluetooth device.

Levitating

Creates visual effect using electromagnets housed

inside the woofer station. Also you can enjoy 360–

degree sound and bass of the subwoofer embedded

inside the woofer station.

Auto wireless charging

When battery is completely discharged (0 %),

speaker automatically descends to the woofer

station and starts to charge wirelessly.

Dual Play (Optional)

You can enjoy the sound in stereo by using two

speakers. For enjoying Dual play, you need to

purchase another speaker.

(Available PJ series model : 3, 8, 9)

Introduction

Symbol used in this manual

, Note

Indicates special notes and operating features.

> Caution

Indicates cautions for preventing possible damages

from abuse.

Water-proof (IPX7)

This speaker is water-proof according to IPX7.

IPX7 is a Water-proof up to 1 meter for 30

minutes. Speaker is water-proof wireless

speaker but it can be damaged.

Avoid the cases below.

yDo not use unit under water or other liquid.

yWhen you use unit, close the port cover

securely.

yWhen battery is charging, do not expose the

unit to water.

yWhen exposed to water, wipe off it with a

soft dry cloth.

yPorts are not water-proof. When you want

a water-proof effect, close the port cover

securely from left to right as follows.

> Caution

Getting Started

Speaker

e h

lm n

Microphone

Power LED

Bluetooth LED

Dual Play LED

Turns On / Off : Press it.

- Adds a Bluetooth device for multi pairing.

(Press and hold j)

- Changes to Bluetooth mode in portable mode.

(Press j)

* When you connect the portable cable, the

function is changed to portable mode.

p : Turn down the volume.

o : Turn up the volume.

- Starts, pauses or skip playback on the

Bluetooth mode. (Page17)

- Receives a call on the Bluetooth device.

(Page 18)

- Mutes the sound on the portable mode.

Connects two speakers for dual play.

(Page 23)

Battery LED

Reset hole

USB port for charging

Portable In connector

Listens to music from your portable device.

Port cover

Getting Started

Woofer station

c d e

Levitates or descends speaker manually.

Mood LED light

/ button

- Turn up maximum volume of speaker.

(Press )

- Initialize woofer station.

(Press and hold )

DC OUT 5 V 0500 mA

(USB port only for charging mobile devices)

DC IN

(AC adapter input)

Woofer station is not water-proof.

Do not use device in water or use them in a

humid.

> Caution

2 Connecting

Connecting

Connecting the

AC Adapter

Connect the woofer station to the power supply with

the supplied AC adapter.

1. Connect the supplied AC power cord to the AC

adapter.

2. Connect the AC adapter cable to DC IN adapter

input.

3. Plug the AC power cord into an AC outlet.

Only use the AC adapter supplied with this

device. Do not use a power supply from another

device or manufacturer. Using any other power

cable or power supply may cause damage to the

device and void your warranty.

> Caution

Speaker and

Woofer station

connection

Woofer station's Mood LED light

status

Status Description

Dim The woofer station is not connected

with speaker.

Blink The woofer station is connecting

with speaker.

On The connection is completed.

Off

The woofer station is in standby

mode.

The power cord of woofer station is

disconnected.

Revolve Speaker is levitating or descending.

When operation of woofer station is completed,

mood LED light turns off in 15 seconds.

, Note

Connecting

Setting up the woofer station

1. Keep the speaker more than 50 cm away from

the woofer station.

2. Connect the AC adapter to the woofer station.

3. Turn on the speaker.

Place the speaker on the woofer station. Align to

center the speaker on the woofer station, follow

image below.

5. Press the speaker for tting its hole to center of

woofer station.

- Speaker : Dual Play LED blinks with sound.

- Woofer station : Mood LED light blinks with

sound.

6. The speaker and woofer will be automatically

connected.

- Speaker : Dual Play LED turns off

- Woofer station : Mood LED light turns on with

sound.

Manually connecting woofer station

When your connection is not completed, you can

check Dual Play LED's state on the speaker. And the

woofer station does not make sound. To solve the

problem, follow the steps below.

1. Press and hold button for 7

seconds after placing the speaker in a different

place.

- Woofer station : Mood LED light blinks 4 times.

2. Turn speaker off and on again.

3. Follow the steps 4-5 of the “Setting up the

woofer station”

Andere Handbücher für PJ9

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung