LG ThinQ WK7 Technisches Datenblatt

SIMPLE MANUAL

MODEL

WK7/WK7W

www.lg.com

ENGLISH

MFL70405172

2108_Rev03

Safety Information

AUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK DO NOT REMOVE COVER

(OR BACK) NO USER-SERVICEABLE PARTS

INSIDE REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

This lightning ash with

arrowhead symbol within an

equilateral triangle is intended to

alert the user to the presence of

uninsulated dangerous voltage within the

product’s enclosure that may be of sufcient

magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and

maintenance (servicing) instructions in the

literature accompanying the product.

WARNING:

yTO PREVENT FIRE OR ELECTRIC SHOCK

HAzARD, DO NOT ExPOSE THIS PRODUCT

TO RAIN OR MOISTURE.

yDo not install this equipment in a conned

space such as a book case or similar unit.

yThis unit contains magnets which can

be harmful to some kind of object (Ex :

Magnetic card, Pacemaker etc..).

CAUTION:

yDo not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of

the product and to protect it from over heating.

The openings should never be blocked by

placing the product on a bed, sofa, rug or other

similar surface. This product shall not be placed

in a built-in installation such as a bookcase or

rack unless proper ventilation is provided or the

manufacturer’s instruction has been adhered to.

yThe apparatus should not be exposed to

water (dripping or splashing) and no objects

lled with liquids, such as vases, should be

placed on the apparatus.

yNo naked ame sources, such as lighted

candles, should be placed on the apparatus.

yTo avoid re or electric shock, do not open

the unit. contact to qualied personnel only.

yDo not leave the unit in a place near the

heating appliances or subject to direct

sunlight, moisture, or mechanical shock.

yThe Power Plug is the disconnecting device.

In case of an emergency, the Power Plug

must remain readily accessible.

yTo clean the unit, use a soft, dry cloth. If

the surfaces are extremely dirty, use a

soft cloth lightly moistened with a mild

detergent solution. Do not use strong

solvents such as alcohol, benzine, or thinner,

as these might damage the surface of the

unit.

yDo not use volatile liquids such as

insecticide spray near the unit. Wiping with

strong pressure may damage the surface.

Do not leave rubber or plastic products in

contact with the unit for a long period of

time.

yDo not place the unit over the vehicle’s air

bag. When the air bag deploys, it may result

in injury. Before using in the car, x the unit.

yDo not use the handsfree function while

driving a car.

yDo not leave the unit on an unstable place

such as high shelves. it may fall down

because of the vibration of the sound.

yDo not use high voltage products around

this product. (ex. Electrical swatter) This

product may malfunction due to electrical

shock.

CAUTION when using this product in

environments of low humidity.

yIt may cause static electricity in

environments of low humidity.

yIt is recommended to use this product after

touching any metal object which conducts

electricity.

NOTICE: For safety marking information

including product identication and supply

ratings, please refer to the main label on the

bottom or the other surface of the product.

CAUTION: Only use the AC adapter supplied

with this device. Do not use a power supply

from another device or another manufacturer.

Using any other power cable or power supply

may cause damage to the device and void your

warranty.

Declaration of Conformity

Hereby, LG Electronics declares that the

radio equipment type LG ThinQ speaker is

in compliance with the relevant statutory

requirements. The full text of the UK

declaration of conformity is available at the

following internet address:

http://www.lg.com/global/support/cedoc/cedoc#

The use of the 5150 – 5350 MHz band is

restricted to indoor use only. This restriction

exists in the United Kingdom (UK).

For consideration of the user, this device

should be installed and operated with a

minimum distance of 20 cm between the

device and the body.

Frequency range Output power (Max.)

2402 to 2480 MHz 10 dBm

2412 to 2472 MHz 20 dBm

5180 to 5240 MHz 20 dBm

Declaration of Conformity

Hereby, LG Electronics declares that the

radio equipment type LG ThinQ speaker is in

compliance with Directive 2014/53/EU. The

full text of the EU declaration of conformity

is available at the following internet address:

http://www.lg.com/global/support/cedoc/cedoc#

The use of the 5150 – 5350 MHz band is

restricted to indoor use only. This restriction

exists in Belgium (BE), Bulgaria (BG), Czech

Republic (CZ), Denmark (DK), Germany

(DE), Estonia (EE), Ireland (IE), Greece (EL),

Spain (ES), France (FR), Croatia (HR), Italy

(IT), Cyprus (CY), Latvia (LV), Lithuania

(LT), Luxembourg (LU), Hungary (HU), Malta

(MT), Netherlands (NL), Austria (AT), Poland

(PL), Portugal (PT), Romania (RO), Slovenia

(SI), Slovakia (SK), Finland (FI), Sweden (SE),

Northern Ireland (UK(NI)), Switzerland (CH),

Iceland (IS), Liechtenstein (LI), and Norway

(NO).

For consideration of the user, this device

should be installed and operated with a

minimum distance of 20 cm between the

device and the body.

Frequency range Output power (Max.)

2402 to 2480 MHz 10 dBm

2412 to 2472 MHz 20 dBm

5180 to 5240 MHz 20 dBm

Symbols

Refers to alternating current (AC).

0Refers to direct current (DC).

Refers to class II equipment.

1Refers to stand-by.

!Refers to “ON” (power).

Refers to dangerous voltage.

Disposal of your old appliance

1. This crossed-out wheeled bin symbol

indicates that waste electrical and

electronic products (WEEE) should be

disposed of separately from the municipal

waste stream.

2. Old electrical products can contain

hazardous substances so correct disposal

of your old appliance will help prevent

potential negative consequences for the

environment and human health. Your old

appliance may contain reusable parts that

could be used to repair other products,

and other valuable materials that can be

recycled to conserve limited resources.

3. You can take your appliance either to the

shop where you purchased the product,

or contact your local government waste

ofce for details of your nearest authorised

WEEE collection point. For the most up to

date information for your country please

see www.lg.com/global/recycling

POWER:

This unit operates on a mains supply

of 100-240 V ~ 50 - 60 Hz (50-60 Hz).

Wiring: This unit is supplied with a BS 1363

approved main plug. When replacing the

fuse, always use a fuse of the same rating

and approved to BS 1362. Never use this

plug with the fuse cover omitted. To obtain a

replacement fuse cover contact your dealer.

If the type of plug supplied is not suitable for

the mains sockets in your home, then the

plug should be removed and a suitable type

tted. Please refer to the wiring instructions

below:

Warning: A mains plug removed from the

mains lead of this unit must be destroyed. A

mains plug with bared wires is hazardous if

inserted in a mains socket. Do not connect

either wire to the earth pin, marked with

the letter E or with the earth symbol 6 or

coloured green or green and yellow. If any

other plug is tted, use same rating of fuse in

the plug.

Important: The wires in this mains lead are

coloured in accordance with the following

codes:

- BLUE: NEUTRAL, BROWN: LIVE - As the

colours of the wires in the mains lead of this

unit may not correspond with the coloured

marking identifying the terminals in your

plug, proceed as follows: The wire which is

coloured blue must be connected to the

terminal which is marked with the letter N

or coloured black. The wire which is coloured

brown must be connected to the terminal

which is marked with the letter L or coloured

red.

OPEN SOURCE

SOFTWARE NOTICE

INFORMATION

To obtain the source code under GPL, LGPL,

MPL, and other open source licenses, that is

contained in this product, please visit

http://opensource.lge.com.

In addition to the source code, all referred

license terms, warranty disclaimers and

LG Electronics will also provide open source

code to you on CDROM for a charge covering

the cost of performing such distribution (such

as the cost of media, shipping and handling)

upon email request to opensource@lge.

com. This offer is valid for a period of three

years after our last shipment of this product.

This offer is valid to anyone in receipt of this

information.

Disclaimers

yGoogle, Google Home, Google Play,

Chromecast built-in and other related marks

and logos are trademarks of Google LLC.

yGoogle Assistant requires an internet/data

connection. Data rates may apply.

yThe Google Assistant is not available in

certain languages and countries.

ySubscriptions may be required, and additional

terms, conditions and/or charges may apply.

yControlling certain devices and features

in your home requires a compatible smart

device.

Set up

Step 1. Connect the AC

adapter

After connecting the AC adapter, the

speaker starts booting. Then Function

LED rotates for 10 seconds (Approx. 30

~ 50 seconds) during booting.

Step 2. Install "Google

Home" App

Download the Google Home App from

the Google Play or App Store.

Google Home

The speaker is not compatible with the

“Smart ThinQ” app. So it can not be

used for setup or for control by using

the “Smart ThinQ” app.

NOTE

Step 3. Set up the WI-FI

connection using the app

aConnect your smart device to the

Wi-Fi network that you’ll use for

your speaker.

In the case of an IOS device, Bluetooth

setting should be turned on, on your

smart device.

NOTE

bLaunch the “Google Home” app.

cFollow the steps for WI-FI,

connection on the app.

When connected to WI-FI, this app may

request to create a Google Account.

You will need a Google account to use

this app.

NOTE

dWhen successfully connected the

WI-FI, blinking Function LED will be

solid white.

yFor more information (Set up,

Usage, Help etc.), research “Google

Assistant Help” or visit the web

site. https://support.google.com/

assistant This public site is provided

for devices that work with Google

Assistant.

yThe speaker may not be available

to use some function from “Google

Assistant Help” site.

y“Google Home” app is provided by

Google. It might be revised by a

change of Google Policy.

NOTE

Andere Handbücher für ThinQ WK7

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung