Liesegang DV610 Bedienungsanleitung

Liesegang dv 610

Bediener-Handbuch

User Manual - Mode d'emploi - Istruzioni per l’uso

Guía del operador - Manual do Usuário

User Manual for TFT 6.4“ Data Video Projector 1

Preface 2

1. Scope of Delivery 2

2. Quick Setting Up

2.1 Setting Up the Projector 3

2.2 Projector Terminal Connections 3

2.3 Control Panel Keypad 4

2.4 Mouse Connection 4

2.5 Image Size 4

3. Starting Up the Projector

3.1 First Steps 5

3.2 Standby Mode 5

3.3 Projector Switch Off 6

3.4 Projector Power Down 6

3.5 Using System Menus 6

3.6 Menu Adjustments/Settings 7

4. Remote Control

4.1 How to Operate the Remote Control 10

4.2 Remote Control Button Functions 10

4.3 Replacing the Batteries 12

5. Lamp Information

5.1 Metal Halide Projection Lamp 12

5.2 Lamp Life Indicator 12

5.3 Replacing the Lamp 13

6. Maintenance

6.1 Replacing the Air Filter 15

6.2 Cleaning the Projector 16

7. Troubleshooting List 16

Appendix

1. Technical Specification 18

2. Projector-to-Screen Distance 19

3. Detailed Setup Information

3.1 Setting Representation, Resolution, Colours 19

4. Tips for Data Projection 22

5. Service Hotline 22

2 User Manual for TFT 6.4“ Data Video Projector

Preface

The manual describes the Liesegang 6.4“ TFT Data Video Projector. Please read

through this operator manual carefully before starting your projector.

Your projector is easy to use and enables computer data to be projected in natural

colours at conferences, seminars or anywhere where pictures, graphics and texts are

to be made accessible to a wider audience. This manual aims to provide the reader

with an introduction to connecting and operating the projector to achieve maximum

success for your presentation.

The projector can be controlled from either the built-in keyboard or the infrared remote

control. All settings are menu-guided and the help texts are available in many

languages. The current parameters are shown on the display.

Functions used frequently, such as brightness or volume controls for video

projections, can be executed directly from the remote control without calling up the

menu system.

Due to its comprehensive range of automatic functions, the projector relieves the user

of much of the work of adaptation to the computer, screen card and mode of display,

most tasks being reduced to a simple key press. For this very reason we recommend

you familiarize yourself with all of the controls of the projector and read through the

section entitled Tips for Data Projection in particular before making your first

presentation.

Faulty settings or incorrect connection of the projectors can lead to impairment of the

functions of the display and the connected equipment. Only use the original adapter

and connection sets suitable for your computer and monitor.

Should you have any questions or doubts please contact your dealer who will gladly

pass on your request to the manufacturer if necessary.

1. Scope of delivery

The standard equipment includes:

1 TFT-LCD projector with 800x600 pixels resolution

1 dust cover

1 connection cable for VGA/ SVGA analogue, 15 - 15 pin, M/M

1 mouse cable, 9 pin - 9 pin, F/F

1 PS/2 mouse adapter

1 infrared remote control with 2 batteries

1 mains cable,

1 user manual

1 video connection set consisting of:

1 video cable, RCA M/M 75 Ω

1 audio cable, double, RCA mini plug

1 S-VHS cable

1 SCART-RCA adapter

Important note

The projector features its own electronic multi-range power supply with automatic

switching. It must only be operated with 100 V - 130 V or 200 - 240 V AC with a

frequency of 50 Hz to 60 Hz. The unit must only be connected to a properly installed

network with protective conductor. Please check immediately whether the supplied

mains cable is compatible with the mains sockets on-site. Please contact your supplier

if a different power supply cable is required for use abroad.

User Manual for TFT 6.4“ Data Video Projector 3

2. Quick Setting Up

2.1 Setting Up the Projector

These instruction are intended to get you going fast. If you have any problems, refer to

Appendix 3.

To avoid damage to the equipment, all power to projector and input

sources must be turned off during cable hook up.

1. Place the projector on a rigid, non-slip surface.

2. Lift cover lock levers and raise top cover into open position.

3. Connect the power cord (Section 2.2).

4. Connect the audio and video input cables to the projector input terminals

(Section 2.2).

5. For mouse emulation, connect the mouse cable (Section 2.4). PS/2 applications

and Apple Macintosh computers require an additional adapter or connecting

cable.

6. Power up the projector then the computer and the video sources (Section 3.1).

7. Move the projector nearer or further away from the screen to obtain

the best image size (Appendix 2).

2.2 Projector Terminal Connections

Take a moment to look over the input terminals on the back of the projector. Terminal

connectors for the computer source are: RGB, Mouse, Audio 1/Audio 2. Terminal

connectors for the video sources are: Video, S-Video, Audio 1/Audio 2.

1. On/Off power switch

2. Power cord terminal

3. RGB computer terminal

4. Mouse terminal

5. Audio 1 – 3.5 mm stereo mini jack

6. Video jack

7. S-VHS jack

8. Audio 2 – 3.5 mm stereo mini jack

4 User Manual for TFT 6.4“ Data Video Projector

2.3 Control Panel Keypad

The control panel keypad is located on the back of the projector. It has the

following buttons:

1. Green indicator lamp

2. Red indicator lamp

3. Standby button

4. Menu button

5. Select/Enter button

6. Arrow Keys (up/down, left/right)

2.4 Mouse Connection

The projector has a built-in mouse emulation capability. Use the mouse cable to

connect your computer to the projector. Then control your computer mouse functions

via the remote control.

1. Switch off computer and projector.

2. Remove mouse cable connection from your computer mouse port.

3. Connect the mouse port of the projector to the mouse port of the computer. For

Microsoft serial mouse application use the mouse cable supplied with this

projector. (For PS/2 applications or Apple Macintosh computers an adapter or a

connecting cable is required).

4. First, start up the projector, then start up the computer.

Note: Mouse emulation only works, when all cable connections are established and

then the proper start up sequence is followed. See section 3.1.

2.5 Image Size

Adjust the size of the projected image on the screen by moving the projector closer to

the screen for a smaller image or further away from the screen for a larger image size.

Details in Appendix 2.

User Manual for TFT 6.4“ Data Video Projector 5

3. Starting Up the Projector

3.1 First steps

After all cable connections have been completed, the projector can

be switched on. For best results, please observe the following start up sequence:

1. Press the power switch (1) to ON to apply power to the projector

(I = ON, O = OFF). The red LED (3) will illuminate.

2. Press the Standby button (2). The green LED (3) will illuminate and an image will

appear and grow brighter on the screen.

3. Check all lateral ventilation slots and clear away any obstructions.

4. Turn the lens (4) to focus the image.

5. Press the foot lock button (5) to release the height adjustment feet.

6. Raise/lower projector body to extend or retract feet (6) to obtain best image

height. Rotate feet (7) for fine adjustment.

7. Power up your computer source and video source(s).

Note: In most cases, the projector will automatically adjust to the graphic mode of

your computer by selecting a pre–programmed setting. See Appendix 3.

3.2 Standby Mode

When the projector is not being used, place it into standby mode.

1. Press the Standby button.

2. The lamp will switch off and the red LED will illuminate the lamp and project an

image on the screen.

Note: In standby mode, the fan motor will continue to run for a few minutes until the

projector cools down.

3. Press the standby button again to illuminate the lamp and project an image on the

screen.

6 User Manual for TFT 6.4“ Data Video Projector

3.3 Projector Switch Off

Press the standby button to place the projector in the standby mode. The cooling fan

motor will continue to run.

1. Wait until the cooling fan motor cycles off then press the main

power switch to OFF.

2. Turn off the power to your input devices.

Note: Switching the power off before the fan has cycled off, will decrease the life of

the projection lamp.

3. To transport the projector, disconnect the power cord, computer cable, mouse cable

and audio/video cables and place into carrying case.

3.4 Projector Power Down

1. Press the Standby button to place the projector in the standby mode. The cooling

fan motor will continue to run.

2. Wait until the cooling fan motor cycles off then press the main power switch to Off.

Note: Switching the power off before the fan has cycled off, will decrease the life of

the projection lamp.

3. Turn off the power to your input devices.

4. To transport the projector, disconnect the power cord, computer cable, mouse cable

and audio/video cables and place into carrying case.

3.5 Using System Menus

You can use the control panel buttons or the remote control to access menus, exit

menus and set menu options. At the top of each menu is a help window which

displays messages that pertain to the menu item that is highlighted.

Press the up/down or left/right ARROW KEYS on the control panel or move the

DISKPAD CONTROL on the remote to navigate through the submenus and select

menu items.

!" Enter for setup sub

Menu clear menu

Setup

Option

Audio

Data

VESA 800 x 600 60 Hz

Sync Brightness

Tracking 1056 Contrast

H. off. Inverse off

V. off. Pix. 800 x 600

Help

Window

Setup

Submenu

1. Press the MENU button to display the main menu.

2. Press the up/down ARROW KEYS or move the DISKPAD up/down to choose a

sub-menu.

3. Press the SELECT/ENTER button to select the sub–menu.

User Manual for TFT 6.4“ Data Video Projector 7

4. Press the up/down ARROW KEYS or move diskpad to select a menu item in the

sub-menu.

5. Press the left/right ARROW KEYS or move the diskpad left/right to change the

value of a menu item.

6. Press the SELECT/ENTER button, if required, to confirm the change to the menu

item.

Note: When the background of the displayed item turns red, you must press the

SELECT/ENTER button to confirm the change.

7. Press the MENU button to exit the sub-menu and return to the main menu.

8. In some cases, a message will display in the help window asking you to confirm the

changes made in the sub-menu. Press SELECT/ENTER to confirm.

9. Press the MENU button to exit the main menu display and return to the projected

image.

3.6 Menu Adjustments/Settings

Depending on the current video source selection, the menu items for either the Video

Menu or the Data Menu will display. The table below lists all the menu items that can

be adjusted.

An asterisk (*) indicates the item appears on the Data menu only, two asterisks (**)

indicate the item appears on the Video/S-VHS menu only and no marking ( ) indicates

the item is common to both menus.

Submenu Setup*/Image**

Menu Item Explanation of Adjustment/Setting

<Mode>* Selection of graphic mode (e.g. VGA 640 x

480, VESA 800 x 600 72 Hz, etc.). Five

user modes. See appendix 3.

Brightness Image brightness.

Contrast Image contrast.

V. off*

(vertical

offset)

Adjusts the vertical position of the image.

H. off*

(horizontal

offset)

Adjusts the horizontal position of the image.

Colour** Colour saturation.

Inverse* B/W inverse of image.

Sync* Manual synchronization (phase) or

automatic adjustment using Select/Enter.

Tracking* Manual screen width (total pixel

number/line) or automatic adjustment using

Select/Enter.

Pixel* Image format: For unscaled image use the

standard resolution.

Submenu Option

Projection Change image direction for back projection

application. (Default=normal)

8 User Manual for TFT 6.4“ Data Video Projector

Lamp Mode Change lamp power: standard (=std.) or

eco. (= low) ( Default = eco.)

Remote

Contr. Turn remote control feature On/Off.

(Default=On)

Auto Mode* Turn automatic mode detection On/Off.

(Default=On)

De-

interlacing** On = Standard video input (VCR).

Off = Motion video input (camera).

Language Select menu display language.

Help Turn menu help text messages On/Off.

(Default = On)

Std.** Select video mode (Default = Auto)

SoG* Sync-On-Green level. Only for Sync-On-

Green mode.

<Sync

Mode>* Change synchronization mode (separate,

composite, SoG).

Hue** Colour level for NTSC video.

NTSC** Default setting of NTSC image (full screen

or centered)

St.by-

Timer*Select standby delay: from 15m, 30m, 45m

and 60m. If the timer is switched off, the

projector switches to the standby mode

immediately when the Standby button is

pressed (lamp off). The Standby mode is

delayed in all other settings. The lamp

remains lit for this time period, the display is

darkened and the projection area is turned

black.

Submenu Function

Freeze Freeze an image (Default = off).

Reset* Restores video modes to factory default

settings.

Lamp Lamp life indicator. Green bar - lamp is

good. Red bar - lamp needs replacement

Submenu Sound

Volume Volume level.

Treble Treble setting.

Bass Bass setting.

Balance Left/right balance of speakers.

Sound Speakers On/Off. (Default = On)

Stereo Stereo sound On/Off. (Default = On)

<Audio

assign-

ment>

Select audio-in channels (Audio-1/Audio-2)

according to data/video selection.

Audio-In 1: Data S-VHS S-VHS

User Manual for TFT 6.4“ Data Video Projector 9

Audio-In 2: Video Data Video

Submenu <Video Mode>

Arrow keys

left/right or

diskpad

Select video source: Data, Video or S-VHS

Inhaltsverzeichnis

Andere Liesegang Projektor Handbücher

Liesegang

Liesegang DV 390 Bedienungsanleitung

Liesegang

Liesegang dv 481 Handbuch

Liesegang

Liesegang ddv 3200 Gebrauchsanweisung

Liesegang

Liesegang Solid Ultra Technisches Dokument

Liesegang

Liesegang dv 483 Handbuch

Liesegang

Liesegang dv 540 flex Gebrauchsanweisung

Liesegang

Liesegang 294 Bedienungsanleitung

Liesegang

Liesegang dv 420 Bedienungsanleitung

Liesegang

Liesegang dv475 Bedienungsanleitung

Liesegang

Liesegang dv350 Bedienungsanleitung

Liesegang

Liesegang ddv 1800 Bedienungsanleitung

Liesegang

Liesegang dv-485 Handbuch

Liesegang

Liesegang ddv 2300 Bedienungsanleitung

Liesegang

Liesegang 283A Bedienungsanleitung

Liesegang

Liesegang ddv 1500 Bedienungsanleitung

Liesegang

Liesegang DV 470 Bedienungsanleitung

Liesegang

Liesegang dv370 Bedienungsanleitung

Liesegang

Liesegang DV 880 Bedienungsanleitung

Liesegang

Liesegang Mayfair Bedienungsanleitung

Liesegang

Liesegang 278 Bedienungsanleitung

Liesegang

Liesegang dv 465 Bedienungsanleitung

Liesegang

Liesegang ddv 2500 Bedienungsanleitung

Liesegang

Liesegang 266 Bedienungsanleitung

Liesegang

Liesegang ddv 2000 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung