Lifetime 60030 Bedienungsanleitung

MODEL N° 60030

OWNER’S MANUAL

Keep this Identiﬁcation Number in case you must contact our Customer Service Department.

**For customers outside the U.S. or Canada, please contact the store for assistance.**

**U.S. and Canada customers ONLY**

IF ASSISTANCE IS NEEDED,

DO NOT CONTACT THE STORE!

CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865

HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time)

**Call, or visit our Web site for Saturday hours**

Most injuries are caused by misuse and/or not following instructions. Use caution when using this system.

To ensure safety, do not attempt to assemble this product without following the instructions carefully. Check entire box and inside all packing

material for parts and/or additional instruction material. Before beginning assembly, read the instructions and identify parts using the hardware

identiﬁer and parts list in this document. Proper and complete assembly, use, and supervision are essential to reduce the risk of accident or

injury. A high probability of serious injury exists if this system is not installed, maintained, and/or operated properly.

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY

DAMAGE AND WILL VOID WARRANTY.

t5XPDBQBCMFBEVMUTBSFSFDPNNFOEFEGPSBTTFNCMZ

t'PMMPXBOZBOEBMMXBSOJOHTBOEDBVUJPOTDBSFGVMMZ

t"TTFNCMFPOMFWFMHSPVOE

t$IFDLBMMOVUTBOETDSFXTGPSUJHIUOFTTCFGPSFBOEEVSJOHUIFVTBHFTFBTPO

SAFETY INSTRUCTIONS

LIFETIME’S PROMISE TO YOU:

We invite you to read our privacy policy at www.lifetime.com

At Lifetime, we are committed to providing innovative and quality products. While registering, you will have the opportunity to give us your feedback. Your input

is valuable to us.

t:PVDBOBMTPPQUJOUPSFDFJWFOFXQSPEVDUOPUJmDBUJPOTPSQSPNPUJPOT

t*OUIFVOMJLFMZFWFOUPGBQSPEVDUSFDBMMPSTBGFUZNPEJmDBUJPOZPVSSFHJTUSBUJPOQSPWJEFTUIFJOGPSNBUJPOXFOFFEUPOPUJGZZPV

directly.

t3FHJTUSBUJPOJTGBTUFBTZBOEDPNQMFUFMZWPMVOUBSZ

Maintaining your privacy is our long-standing policy at Lifetime. And you can rest assured that Lifetime will not sell or provide your

personal data to other third parties, or allow them to use your personal data for their own purposes.

04/1/2012

INSTRUCTION #1066877 D

TOOLS REQUIRED FOR ASSEMBLY

*TWO ADULTS REQUIRED TO

COMPLETE ASSEMBLY*

BEFORE BEGINNING ASSEMBLY

Keep the hardware bags and their contents separate. If any parts are missing, call our Customer Service

Department.

The plastic pieces of your table may become damaged by over tightening the screws. If you choose

to use a power screwdriver, we strongly recommend the use of a low-powered power screwdriver or a

drill that has an adjustable clutch that is set to a low-torque setting. If neither is available, use a hand

screwdriver or socket wrench.



Safety Glasses

(1) (1 pair for each person)

Electric Drill

This area is located at the top, left-hand

corner of the page and indicates which tools

and hardware are needed to complete the

assembly steps on a page.

This area is located at the top, right-hand

corner of the page and shows an image of the

product with shaded parts indicating which

section is being assembled.

SEC

Note:

Refer to the following areas throughout the instructions

to assist in the assembly process:

This area is usually located in the bottom,

left-hand corner of a step and indicates that

special attention is needed to perform a

particular part of a step.

These areas are usually located in the bottom,

right-hand corner of a step and indicate that

damage to the product or serious injury may

occur if the caution or warning is not heeded.

Throughout the Parts & Hardware List, Part

& Hardware Identiﬁers, and instructions

are three-letter IDs. These IDs are below

the images of the parts and hardware to

help you locate and identify the parts and

hardware during assembly. These IDs are not

necessarily on the parts themselves.

WARNING

ASSEMBLY GUIDE

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

CAUTION

ADZ (x10)

1/4” x 5/8” Pan-Head Screw

ID DESCRIPTION QTY

BWM Table Top Assembly 1

BWN Bench Assembly 2

BWO W-Frame Leg Assembly 2

BWP W-Frame Leg Brace Assembly 2

W-FRAME TABLE HARDWARE [BWL]

)BSEXBSFTIPXOBUBDUVBMTJ[F6OMFTTOPUFEPUIFSXJTF

PARTS & HARDWARE IDENTIFIER

PARTS & HARDWARE LIST

ID DESCRIPTION QTY

BWL W-FRAME TABLE HARDWARE

BWI Sliding End Cap 8

BWH 6.3 mm x 25 mm Hex-Head Screw 8

BWG M6 x 1 x 12 mm Hex Bolt 4

AON M6 x 1 Nylock Cap Nut 4

BWG (x4)

M6 x 1 x 12mm Hex Bolt

AON (x4)

M6 x 1 Nylock Cap Nut

BWH (x8)

6.3mm x 25mm Hex-Head Screw

BWI (x8)

Sliding End Cap

1BSUTTIPXOBUPGBDUVBMTJ[F

BWM (x1)

Table Top Assembly

BWN (x2)

Bench Assembly

BWO (x2)

W-Frame Leg Assembly BWP (x2)

W-Frame Leg Brace Assembly

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

1.1

PICNIC TABLE ASSEMBLY

BWM

Remove all screws connecting the

Table Top channel to the Table Top

Table Top Channel

Lay the Table Top Assembly (BWM) upside down on the ground. Remove the ﬁve (5) screws connecting one of the

Table Top channels to the Table Top, and remove the channel from the Table Top. Save Screws for later in the

assembly.

NO HARDWARE REQUIRED FOR THIS PAGE

SEC

1.2 If the Locking Strap is not already attached to the W-Frame Leg Brace Assembly (BWP), slide a Locking Strap over the

tube of the Leg Brace as shown. Ensure the Locking Strap is oriented with the metal ring facing downward as shown.

BWP

Locking Strap

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

1.3

SEC

1.3

2 ADULTS REQUIRED FOR THIS STEP

Insert a W-Frame Leg Assembly (BWO) and a W-Frame Leg Brace Assembly (BWP) into the two large holes along the Table

Top channel that is still connected to the Table Top as shown. Ensure you orient the Brace in the direction shown

(the locking mechanism must be visible). Repeat step 1.2 - 1.3 for the second W-Frame Leg Assembly and W-Frame Leg Brace

Assembly.

While another adult helps to hold the Assemblies in position, place the holes in the second Table Top channel

over the tubes of the Table Legs and Table Leg Braces as shown.

NO HARDWARE REQUIRED FOR THIS PAGE

SEC

1.3

SEC

1.4

BWO

Table Top Channel

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

2 ADULTS REQUIRED FOR THIS STEP

SEC

1.5 Set the Table Top Channel back in place. While another adult holds the Legs, reinsert the ﬁve (5) screws you

removed in step 1.1 into the holes of the Table Top Channel to secure it in place. Do not overtighten.

Reinsert all ﬁve Screws

removed in step 1.1

BWI

SEC

1.3 Lay the Table Legs and Table Leg Braces down ﬂat on the Table Top. Place a Sliding End Cap (BWI) on the ends of

the tube on a Table Leg as shown.

SEC

1.6

BWH

BWH (x5)

All removed in Step 1.1

BWI (x2)

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

BWI (x6)

SEC

1.7 Place a Bench Assembly (BWN) underneath one of the Legs and slide the Sliding End Caps under the glide rails of

the Bench Assembly as shown.

Glide Rail

SEC

1.3 Attach two (2) Sliding End Caps (BWI) to the tube on the other Table Leg, and lift the Bench Assembly upward until

the Sliding End Caps rest inside the underside of the Bench. Position the Bench so all four Sliding End Caps are

under the glide rails. Repeat steps 1.6 - 1.8 for the second Bench Assembly.

SEC

1.8

BWN

2 ADULTS REQUIRED FOR THESE STEPS

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

1.3 Lift the Legs upright and, while another adult holes the Table Legs in place, rotate the diagonal supports of a

Table Leg Brace until the locking pin snaps into the notches located at the ends of the diagonal supports as

illustrated. Connect the other ends of the supports to the Table Leg using two (2) M6 x 1 x 12mm Hex Bolts (BWG) and

two (2) M6 x 1 Nylock Cap Nuts (AON). Repeat this step for the other Table Leg Brace.

Locking Pin

Diagonal Supports

SEC

1.9

BWG

AON

10mm (x2)

BWG (x4)

AON (x4)

SEC

1.10 While another adult holds the Table Legs upright, insert four (4) 6.3mm x 1.8 x 25mm Hex-Head Screws (BWH) through

the holes in the Bench Channels and into the Bench as shown to keep the Sliding End Caps under the Glide

Rails. Do not overtighten. Repeat this step for the other Bench.

BWH

2 ADULTS REQUIRED FOR THESE STEPS

BWH (x8)

Andere Handbücher für 60030

Inhaltsverzeichnis

Andere Lifetime Inneneinrichtung Handbücher

Lifetime

Lifetime 7060 Bedienungsanleitung

Lifetime

Lifetime 0130 Bedienungsanleitung

Lifetime

Lifetime 2123 Bedienungsanleitung

Lifetime

Lifetime 60186 Bedienungsanleitung

Lifetime

Lifetime 60054 Bedienungsanleitung

Lifetime

Lifetime RETRO PATIO 60193 Bedienungsanleitung

Lifetime

Lifetime 2119 Bedienungsanleitung

Lifetime

Lifetime 6' PICNIC TABLE Bedienungsanleitung

Lifetime

Lifetime 853281 Bedienungsanleitung

Lifetime

Lifetime 60246 Bedienungsanleitung

Lifetime

Lifetime 60245 Bedienungsanleitung

Lifetime

Lifetime 60205 Bedienungsanleitung

Lifetime

Lifetime 80123 Bedienungsanleitung

Lifetime

Lifetime 60226 Bedienungsanleitung

Lifetime

Lifetime ADIRONDACK 60335 Bedienungsanleitung

Lifetime

Lifetime 60064 Bedienungsanleitung

Lifetime

Lifetime 80172 Bedienungsanleitung

Lifetime

Lifetime 80055 Bedienungsanleitung

Lifetime

Lifetime 80421 Bedienungsanleitung

Lifetime

Lifetime 2127 Bedienungsanleitung

Lifetime

Lifetime 60284 Bedienungsanleitung

Lifetime

Lifetime 2129 Kurzanleitung

Lifetime

Lifetime 60055 Bedienungsanleitung

Lifetime

Lifetime 60064 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung