Light Blue Optics LT1021FC Bedienungsanleitung
Light Touch LT1021 Series – User Guide v2.1 | Page 1
User Guide
Light Touch
Virtual Touch-Screen Computer
LT1021 Series
For models: LT1021FC/MG/RG
bbb
Light Touch LT1020 – User Guide v1.1 – Application Release C1.0.0 | Page 2
Light Touch LT1021 Series – User Guide v2.1 | Page 2
Contents
Package Contents........................................................................................... 3
Introducing Light Touch™.............................................................................. 4
Safety Notice ................................................................................................... 5
The Basics ........................................................................................................ 6
Getting Started ............................................................................................ 6
Demonstration Applications ...................................................................... 6
Light Touch Settings ...................................................................................... 7
System Information ..................................................................................... 8
Power Management .................................................................................... 9
Wireless Networking ................................................................................. 11
USB Mode ................................................................................................... 14
Support........................................................................................................... 16
Troubleshooting......................................................................................... 16
Support Desk.............................................................................................. 16
Appendix A – ActiveSync USB Setup for Windows XP.......................... 17
Appendix B – ActiveSync USB Setup for Windows Vista/7 .................. 21
Appendix C - Light Touch™ Specifications ............................................... 28
bbb
Light Touch LT1020 – User Guide v1.1 – Application Release C1.0.0 | Page 3
Light Touch LT1021 Series – User Guide v2.1 | Page 3
Package Contents
The following items should be included in the package
•1 x Light Touch (LT1021FC)
•1 x International Power Adaptor (220/110V AC to 5V DC)
•1 x USB Cable (Full-size Type A to Micro Type B)
•1 x CD containing:
•Light Touch LT1021 Series Quick Start Guide
•Links to further documentation on http://lightblueoptics.com
bbb
Light Touch LT1020 – User Guide v1.1 – Application Release C1.0.0 | Page 4
Light Touch LT1021 Series – User Guide v2.1 | Page 4
Introducing Light Touch™
Light Touch™ is an interactive projector that instantly transforms any flat surface into
a touch screen. It projects a full-colour image down onto any flat surface and turns it
into a virtual touch-screen.
Light Touch™ is an application platform with onboard processor, running Microsoft
WinCE 6 R3 operating system. It supports applications written in Adobe Flash Lite 3.1
or Microsoft .NET CF 3.5. Light Touch has wireless networking capability and is
ideally suited to running applications that connect to the internet or cloud-based
servers.
Light Touch model LT1021FC is supplied in a plastic outer shell, designed for
standalone operation.
Figure 1 – Light Touch
bbb
Light Touch LT1020 – User Guide v1.1 – Application Release C1.0.0 | Page 5
Light Touch LT1021 Series – User Guide v2.1 | Page 5
Safety Notice
Caution - use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure
This laser product is certified as a CLASS 1 laser product to the requirements of the
US Federal Product Performance Standard for Laser Products contained in the
regulations in 21 CFR Subchapter J except for specific deviations described in FDA
Laser Notice #50. Class 1 laser products are not considered to be hazardous. This
machine incorporates embedded, Class 3B and 4 lasers which are capable of
producing hazardous levels of laser radiation. However, this product incorporates a
protective housing and controls in its design such that there is no exposure or human
access to levels of laser radiation above Class 1.
UNDER NO CIRCUMSTANCE shall attempts be made to operate this device when it is
damaged or disassembled. Return it to the manufacturer for repair or replacement.
All service to the product shall be performed by Light Blue Optics Ltd., their
authorised agents, or personnel trained by Light Blue Optics Ltd.
bbb
Light Touch LT1020 – User Guide v1.1 – Application Release C1.0.0 | Page 6
Light Touch LT1021 Series – User Guide v2.1 | Page 6
The Basics
Getting Started
1. Remove from packaging
Check package contents against list on page 3.
2. Place unit upright on flat surface
Place the unit on a flat, level surface. For uniform results, a matte white
surface is recommended.
3. Press the button on top of the unit
This will turn on the unit. A blue logo will be projected for a few seconds
whilst the software loads. Light Touch™ will display a carousel menu which
provides access to a selection of preloaded demonstration applications.
4. Touch the projected image to interact
The menu can be navigated by touching the projected image with a finger
and using standard actions such as swipe and click. A touch is registered
when the finger lifts up from the projection surface, and not when the finger
is pressed down.
Demonstration Applications
The Light Touch LT1021 unit comes preloaded with a number of
demonstration applications, which can be accessed via the carousel. A
category can be selected by a single “click” on any visible icon.
Figure 2 – Screenshot of carousel menu
The pre-loaded applications are provided for demonstration purposes
only. Please contact Light Blue Optics for further information if required,
including enquiries about obtaining permission to use part or all of one of
these applications in a commercial product.
For information on creating applications for Light Touch, see the separate
document entitled: ‘Light Touch Application Guide’.
bbb
Light Touch LT1020 – User Guide v1.1 – Application Release C1.0.0 | Page 7
Light Touch LT1021 Series – User Guide v2.1 | Page 7
Light Touch Settings
The user can configure Light Touch via the ‘Settings’ section of the menu
carousel.
Figure 3 – Screenshot of ‘Settings’ icon in menu
Within the ‘Settings’ menu, the following categories are accessible:
•System Information (‘About’)
•Power Management
•Wireless Networking
•USB Mode
Each category is described in the following section.
bbb
Light Touch LT1020 – User Guide v1.1 – Application Release C1.0.0 | Page 8
Light Touch LT1021 Series – User Guide v2.1 | Page 8
System Information
The ‘About’ screen can be accessed from within the ‘Settings’ category:
Figure 4 – Screenshot of ‘About’ icon within ‘Settings’ menu
The ‘About’ screen contains information about the hardware and software
versions. The serial number is the unique identifier for the unit.
Figure 5 – Screenshot of ‘About’ screen
bbb
Light Touch LT1020 – User Guide v1.1 – Application Release C1.0.0 | Page 9
Light Touch LT1021 Series – User Guide v2.1 | Page 9
Power Management
The ‘Power Management’ control panel can be accessed from within the
‘Settings’ category:
Figure 6 – Screenshot of ‘Power Management’ icon within ‘Settings’ menu
The ‘Power Management’ control panel allows the user to put Light Touch
into a ‘display-off’ mode after a period of inactivity. To activate this mode,
the ‘Display Off Time’ needs to be set to a value greater than 0. There are
separate settings for when the unit is running from the power adaptor (called
‘AC mode’) and from the internal battery. Use the arrows to access the other
power management settings.
Figure 7 – Screenshot of power management control panel
In the top right corner of the screen, the power source status is displayed;
either ‘AC Online’ or ‘Battery’ with the current battery charge level. Touching
the value (shown here as ‘0’) brings up a virtual keyboard so that the value
can be changed.
bbb
Light Touch LT1020 – User Guide v1.1 – Application Release C1.0.0 | Page 10
Light Touch LT1021 Series – User Guide v2.1 | Page 10
The virtual keyboard can switch between three screens by pressing the mode
key (marked as *%123) in the image below
Figure 8 – Screenshot of selecting a value in power management control panel
When the desired value has been entered, press the enter key to return (the
right-hand button on the second line up)
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Beliebte Touchscreen Handbücher anderer Marken
IBASE Technology
IBASE Technology ASTUT-152-RE1S Bedienungsanleitung
YASKAWA
YASKAWA TP 610C Bedienungsanleitung
B&R
B&R Power Panel C Series Bedienungsanleitung
Beijer Electronics
Beijer Electronics X2 control Bedienungsanleitung
AXIOMTEK
AXIOMTEK GOT321W-521 Bedienungsanleitung
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Bedienungsanleitung
