Lightmaxx PEGASUS 1.0 MK II Bedienungsanleitung

Bedienungsanleitung

Seite: 1-5

User Manual

Page: 6 - 10

PEGASUS 1.0 MK II

LIG0010529-000

Lieber Kunde,

vielen Dank das Sie sich für ein Produkt von LightmaXX entschieden haben. In der

folgenden Anleitung erhalten Sie wichtige Informationen über dieses Produkt sowie

deren Eigenschaften und Funktionen.

!ACHTUNG!

Laserschutzbestimmungen:

Durch die starke Bündelung des Laserstrahls ist die gesamte Lichtenergie auf eine

geringe Fläche konzentriert. Wird das menschliche Auge von diesem Strahl getroffen,

kann dies Schädigungen hervorrufen. Insbesondere besteht die Gefahr von

Augenverletzungen beim Blick in den direkten Strahl. Ist der Strahl abgelenkt, was bei

den kompakten Showlasersystemen durch die Scanning Einheit

fast immer der Fall ist, ist die Wirkung und somit die Gefahr des Strahls um ein

Vielfaches geringer.

Entsprechend der möglichen Gefährdung werden Laser bzw. Geräte, die einen Laser

enthalten, gemäß Unfallverhütungsvorschrift Laserstrahlung [BGV B2] in Klassen

eingeteilt. 99% der aktuell auf dem Markt erhältlichen kompakten Showlaser und

auch alle von uns angebotenen Laser gehören zur Schutzklasse 3b und 4. Diese

Geräte sind somit genehmigungspflichtig. Zum sicheren Betrieb bei öffentlichen

Veranstaltungen ist ein Laserschutzbeauftragter [Strahlenschutz gemäß VBG 93 §6

(BGV-B2)] zu bestellen. Bei Installationen in öffentlichen Gebäuden (Discotheken,

Mehrzweckhallen, Gaststätten etc.) sind die Systeme vom örtlich zuständigen TÜV

oder der Berufsgenossenschaft abzunehmen. Die in Deutschland gültigen

Bestimmungen zum Betrieb einer Showlaser Anlage müssen beachtet werden.

Informieren Sie sich hierzu bei Ihrer örtlichen Berufsgenossenschaft und der

zuständigen TÜV Behörde.

Technische Daten:

Laserleistung: 1000 mW RGB…150mW green laser@532nm,

250mW red laser@635nm, 600mW blue laser@447nm

Scanner System: 30k High Speed Galvo Motoren

Funktions Modis:Sound to Light, Automatik Modus, Master/Slave, DMX 512, ILDA

Anschlusswerte: 240 V, 50 Hz / 40 Watt

Gewicht: 6,0 Kg

Betriebseinstellungen:

LCD FUNCTION SETTING

ENTER UP UP

RETURN DOWN

Mit den Tasten UP und DOWN wechseln Sie zwischen den Menü Unterpunkten

Mit der Taste ENTER bestätigen Sie Ihre Einstellung

Mit der Taste RETURN gelangen Sie wieder einen Menüschritt zurück

DMX-512

Auto

Menüführung:

1. Menü Ebene

2. Menü Ebene

3. Menü Ebene

4. Menü Ebene

DMX512

Running

A001 (DMX address)

AUTO (auto

running mode)

Running

Effect 1 (Full show)

Effect 2 (only beam)

Effect 3 (only cartoon)

Music (sound

activate mode)

Running

Effect 1 (Full show)

Effect 2 (only beam)

Effect 3 (only animation)

Setting

Address

Choose DMX address

Light

(LCD backlight setting)

OFF

ON 5S (ON for 5 seconds)

ON 10S (ON for 10 seconds)

Cartoon (Running speed)

Press UP and down to choose

running speed from 1~99, 99

is the fastest

Master (set master unit)

OFF

LASER (size and

color setting)

Size

(press up or down to

choose the size of

graphics)

Color

1. Single Color

2. RGY

3. RGB

4. RGP

Default (Restore

default setting)

Yes

DMX Protokoll:

CH1

LASER OFF

0~41

LASER OFF

Auto Activate

42~83

DMX mode, CH2~CH12 valid

84~125

Build-in cartoon graphics auto running mode

126~167

Build-in beam graphics auto running mode

Sound

Activate

168~209

Build-in beam graphics auto running mode

210~251

Build-in cartoon graphics auto running mode

252~255

DMX mode, CH2~CH12 valid

CH2

Pattern select

0~255

Selecting built-in patterns

CH3

Rotation

0~127

Manual rotation

128~191

Auto counter-clockwise rotation (from slow to fast)

192~255

Auto clockwise rotation (from slow to fast)

CH4

X axis rolling

0~127

Manual rolling

128~255

Auto rolling (from slow to fast)

CH5

Y axis rolling

0~127

Manual rolling

128~255

Auto rolling (from slow to fast)

CH6

X axis moving

0~127

Manual choose moving position

128~255

Auto moving (from slow to fast)

CH7

Y axis moving

0~127

Manual choose moving position

128~255

Auto moving (from slow to fast)

CH8

Pattern size

0~63

Choose pattern size, 0 is normal size, 1 is the smallest, 63 is the biggest

Zooming

64~127

Auto zooming (-) from slow to fast

128~191

Auto zooming (+) from slow to fast

192~255

Manual zooming (+/-) from slow to fast

CH9

Drawing

0~255

Auto drawing from slow to fast

CH10

Scanning

speed

0~127

Choose sanning speed from slow to fast

Display dot

128~255

Choose the length of dot

CH11

Color setting

0~24

Normal color

25~199

Choose every single color

200~224

Every single color changing one by one

225~255

All the colors together changing alternatively in one pattern

CH12

Color change

speed

0~255

Adjust color changing speed from slow to fast

Attachments:

1. Laser Light: 1PCS

2. Power Cable: 1PCS

3. User Guide: 1PCS

WARNINGS

Visible and invisible laser-light, direct beam can damage the human eye and the eyes of animals. Do not look at

any Laser light directly.

Do not touch the laser aperture with the hand. When cleaning the laser aperture, please use a soft cloth with

alcohol or camera lens paper.

Do not take apart or modify the equipment. Fire or electrical shock may result.

In the unlikely event that you hear unusual noise, see smoke, feel excessive heat or smell anything unusual,

immediately unplug the power source and contact your retailer. Continued use may result in fires or electrical

shock.

Do not use flammable sprays near this equipment. Also do not spill water, liquids, or flammable liquids on the

equipment. If fluids enter this equipment and contact the electrical parts, fires or electrical shock may result. If

anything enters the equipment, immediately unplug the power supply and contact your retailer.

Installation

1. Carefully inspect your Laser Show equipment after you unpack it. If any damage is evident, such as dents or

scratches on the covers or broken knobs, etc., immediately notify your carrier and your local sales distributor.

2. Hang up the equipment in a safe place. Ensure there are no barriers in front of the laser aperture.

Features of the product:

1. Laser power: 150mW green laser@532nm, 250mW red laser@635nm, 600mW blue laser@447nm

2. Scanner system: 30K high speed optical scanner

3. Working Modes: Sound Active, Auto run, DMX512 (12 CH), Master/slave mode, ILDA mode.

4. Interface: 3 pins XLR jack for DMX or Maser-Slave linking; DB25 ILDA interface for PC control

5. Input power: AC 110V~240V, 50/60Hz. Rated power: 50W.

6. Packing Size: L*W*H=30.2*30.2*26CM; Weight: 5.5KG

Front and Rear panel view:

1. Laser Aperture 2. Running LED 3. Power LED indicator 4. Mic LED 5. DMX signal LED

6. Key Switch 7. DB25 ILDA interface 8. Sound sensitivity knob 9. Sound active microphone

10. LCD function setting panel 11. Interlock 12. DMX or linking jack 13. ON/OFF switch 14. Power Jack

LCD FUNCTION SETTING

ENTER UP

RETURN DOWN

Press “UP”or “DOWN”to choose functions in the same menu.

Press “ENTER”button to enter next menu. Press “RETURN”button to return previous menu.

When you turn on the laser for the first time, it will take some seconds to auto load the built-in show.

DMX-512

Auto

First Menu

Second Menu

Third Menu

Fourth Menu

DMX512

Running

A001 (DMX address)

AUTO (auto

running mode)

Running

Effect 1 (Full show)

Effect 2 (only beam)

Effect 3 (only cartoon)

Music (sound

activate mode)

Running

Effect 1 (Full show)

Effect 2 (only beam)

Effect 3 (only animation)

Setting

Address

Choose DMX address

Light

(LCD backlight setting)

OFF

ON 5S (ON for 5 seconds)

ON 10S (ON for 10 seconds)

Cartoon (Running speed)

Press UP and down to choose

running speed from 1~99, 99

is the fastest

Master (set master unit)

OFF

LASER (size and

color setting)

Size

(press up or down to

choose the size of

graphics)

Color

5. Single Color (1~7)

6. RGY

7. RBP

8. GBC

9. RGB

Default (Restore

default setting)

Yes

Universal DMX Operation (DMX mode)

This mode allows you to use universal DMX-512 console to operate.

1. Install the units in a suitable position.

2. Use standard XLR cable to connect your units together via the XLR connector on the rear of the units. For longer

cable we suggest a terminator at the last fixture.

3. Assign a DMX address to each the unit using dipswitches.

4. Turn on all units. Use DMX console to control your units.

Instruction for DMX channels

CH1

LASER

OFF

0~41

LASER OFF

Auto

Activate

42~83

DMX mode, CH2~CH12 valid

84~125

Build-in cartoon graphics auto running mode

126~167

Build-in beam graphics auto running mode

Sound

Activate

168~209

Build-in beam graphics auto running mode

210~251

Build-in cartoon graphics auto running mode

252~255

DMX mode, CH2~CH12 valid

CH2

Pattern

select

0~255

Selecting built-in patterns

CH3

Rotation

0~127

Manual rotation

128~191

Auto counter-clockwise rotation (from slow to fast)

192~255

Auto clockwise rotation (from slow to fast)

CH4

X axis

rolling

0~127

Manual rolling

128~255

Auto rolling (from slow to fast)

CH5

Y axis

rolling

0~127

Manual rolling

128~255

Auto rolling (from slow to fast)

CH6

X axis

moving

0~127

Manual choose moving position

128~255

Auto moving (from slow to fast)

CH7

Y axis

moving

0~127

Manual choose moving position

128~255

Auto moving (from slow to fast)

DMX Signal

TROUBLE SHOOTING

1. If the power indicator is off and the laser doesn't work, please check the power supply and the input.

2. In Stand-Alone operation, if the power supply indicator is ON and sound active indicator is OFF, but the

laser doesn't work.

A. The sound may be too small and cannot activate the laser running, please increase the music

volume or increase sound sensitivity on rear panel.

B. Please check if unit has been set up in slave mode, or DMX mode.

3. In Master-Slave operation, slave units don't running, please check as below.

A. Make sure there's only one master in the chain, and the others are set in slave mode.

B. Make sure to use a good quality power cable and XLR connector.

4. In DMX operation, the unit can’t be controlled by the DMX console, but the DMX signal indicator is

flashing, please make sure the DMX console and unit have the same channel.

After trying the above solution you still cannot sort out the problem, please contact your dealer or our

company for service

www.musicstore.com

CH8

Pattern

size

0~63

Choose pattern size, 0 is normal size, 1 is the smallest, 63 is the biggest

Zooming

64~127

Auto zooming (-) from slow to fast

128~191

Auto zooming (+) from slow to fast

192~255

Manual zooming (+/-) from slow to fast

CH9

Drawing

0~255

Auto drawing from slow to fast

CH10

Scanning

speed

0~127

Choose sanning speed from slow to fast

Display

dot

128~255

Choose the length of dot

CH11

Color

setting

0~24

Normal color

25~199

Choose every single color

200~224

Every single color changing one by one

225~255

All the colors together changing alternatively in one pattern

CH12

Color

change

speed

0~255

Adjust color changing speed from slow to fast

Inhaltsverzeichnis

Andere Lightmaxx DJ-Equipment Handbücher

Lightmaxx

Lightmaxx GALAXY NX II POLAR Bedienungsanleitung

Lightmaxx

Lightmaxx LIG0007869-000 Bedienungsanleitung

Lightmaxx

Lightmaxx Vega PAR FX II Bedienungsanleitung

Lightmaxx

Lightmaxx Vega BAT LED Bedienungsanleitung

Lightmaxx

Lightmaxx VECTOR BSW 10R MKII Bedienungsanleitung

Lightmaxx

Lightmaxx Cannon Shot FX TWO Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Beam 1.0 Bedienungsanleitung

Lightmaxx

Lightmaxx COMPLETE PAR 56 Bedienungsanleitung

Lightmaxx

Lightmaxx Slim Spot ARC Bedienungsanleitung

Lightmaxx

Lightmaxx Vega MATRIX Wash Bedienungsanleitung

Lightmaxx

Lightmaxx Platinum Tour PIX PRO Bedienungsanleitung

Lightmaxx

Lightmaxx Vega MATRIX Wash Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Pixel BAR Bedienungsanleitung

Lightmaxx

Lightmaxx VEGA SPOT 90 Bedienungsanleitung

Lightmaxx

Lightmaxx LIG0009566-000 Bedienungsanleitung

Lightmaxx

Lightmaxx VEga Shiggy Beam Bedienungsanleitung

Lightmaxx

Lightmaxx LS-5 Bedienungsanleitung

Lightmaxx

Lightmaxx Vector Haze 1.7 Bedienungsanleitung

Lightmaxx

Lightmaxx Vega BAR RGBW Bedienungsanleitung

Lightmaxx

Lightmaxx Platinum LED Par 64 Tri-LED polish Bedienungsanleitung

Lightmaxx

Lightmaxx Vector Haze 1.7 Bedienungsanleitung

Lightmaxx

Lightmaxx Vega spot 60 Bedienungsanleitung

Lightmaxx

Lightmaxx Vector BAT LED Bedienungsanleitung

Lightmaxx

Lightmaxx Vega PAR FX I Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung

Chauvet

Chauvet ovation B-2805FC Bedienungsanleitung