Lightmybricks 71016 Bedienungsanleitung

LightMyBricks

InstallationInstructionsforLightMyBricksLEDLightingKits

May29,2016 ·30minread

LightMyBricks:Kwik-E-MartLED

LightingKit

Here is the instruction document for the Lego Kwik-E-Mart LED lighting

kit. Please read and follow the steps carefully to ensure this lighting kit

is installed properly.

If you run into any issues, please refer to the online troubleshooting

guide.

This user guide is also available to download in PDF format here.

...

Packagecontents:

7x LED Strip Lights•

10x White 30cm Bit Lights

1x Flashing White 30cm Bit Light

3x Flashing Red 30cm Bit Lights

4x White 15cm Bit Lights

2x Flashing White 15cm Bit Lights

2x 12-port Expansion boards

1x 8-port Expansion Board

1x Flat Battery Pack (Requires 2x CR2032 batteries)

1x Battery Pack (Requires 3x AA batteries)

10x Adhesive squares

Connecting Cables

4x 15cm cables

4x 30cm cables

Extra LEGO Pieces for mounting Strip Lights, CCTV and Billboard Lights

4x Lego Plate 1x6

2x Lego Transparent Red 1x1 round plate

2x Lego Black Tile, Modied 1 x 1 with Clip

2x Lego Technic Pin with Friction Ridges Lengthwise WITH

Center Slots

2x Lego Weapon Spear Gun with Squared Trigger and Thick

Spear Base

2x Lego Technic Black 1x1 brick with hole

•

...

Importantthingstonote:

Layingcablesinbetweenandunderneathbricks

Cables can t in between and underneath LEGO® bricks, plates, and

tiles providing they are laid correctly between the LEGO® studs. Do

NOT forcefully join LEGO® together around cables; instead ensure they

are laying comfortably in between each stud.

CAUTION:ForcingLEGO®toconnectoveracable

canresultindamagingthecableandlight.

ConnectingcableconnectorstoStripLights

Take extra care when inserting connectors to ports on the Strip Lights.

Connectors can be inserted only one way. With the Strip Light facing

up, ensure the side of the connector with the wires exposed is facing

down. If a plug won’t t easily into a port connector, don’t force it.

Doing so will damage the plug and the connector.

ConnectingcableconnectorstoExpansionBoards

Take extra care when inserting connectors to ports of Expansion

Boards. Connectors can be inserted only one way. With the expansion

board facing up, look for the soldered “=” symbol on the left side of the

port. The connector side with the wires exposed should be facing

toward the soldered “=” symbol as you insert into the port. If a plug

won’t t easily into a port connector, do not force it.

WARNING:Incorrectlyinsertingtheconnectorcan

resultinbentpinsinsidetheportorpossible

overheatingoftheexpansionboardwhenconnected.

InstallingBitLightsunderLEGO®bricksandplates.

When installing Bit Lights under LEGO® pieces, ensure they are placed

the correct way up (Yellow LED component exposed). You can either

place them directly on top of LEGO® studs or in between.

...

OK, Let’s Begin!

...

Instructionsforinstallingthiskit

LightingthePoliceCar:

1.) Start by removing the following Lego pieces which make up the roof

and windscreen, followed by the black Lego plates and tiles from the

front bonnet.

2.)Disconnect from each side of the car, the black 1 x 1 brick with the

transparent yellow plate attached. Remove the yellow plate from the

black brick and take 1x White 15cm Bit Light and using the connector

end of the cable of the LED, thread this through the hole of the front of

the black brick.

Pull the cable from the back of the black brick all the way until the LED

component is at up against the other side of the brick. Ensure that the

LED component part is facing the correct way up, then secure this

down by reconnecting the transparent yellow Lego plate over the top.

Repeat this step for the other head light of the car using another White

15cm Bit Light.

3.) Reconnect the 2 head lights back to the front of the car ensuring the

cables for the lights are facing up.

4.) Next step is to remove the following Lego pieces from the car so that

we can lay the cables from the headlights underneath and all the way

to the back.

5.) Thread the 2 cables through the small holes behind the front seats,

1 cable through each hole.

6.) Start securing the cables down by reconnecting back Lego plates

and tiles over the top. Before doing so, ensure that the cables are laid in

between studs exactly the same way as the below images.

7.) Reconnect the white bricks as per below ensuring that the cables

are laid in between the black and white studs underneath.

EnsurethecablesarelaidonthesideofeachofthebrownLegostuds

We can now also reconnect the Lego pieces which make up the front of

the dash board, side mirrors, and front windscreen.

8.) In order to hide the rest of the contents from this lighting kit in the

back section of the car, we will be removing and discarding the

following pieces.

Andere Lightmybricks Beleuchtungsausrüstung Handbücher

Lightmybricks

Lightmybricks LEGO THE LORD OF THE RINGS: RIVENDELL 10316 LIGHT... Bedienungsanleitung

Lightmybricks

Lightmybricks 76209 Bedienungsanleitung

Lightmybricks

Lightmybricks SUPER MARIO THE MIGHTY BOWSER 71411 Bedienungsanleitung

Lightmybricks

Lightmybricks 75336 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO Assembly Square 10255 Bedienungsanleitung

Lightmybricks

Lightmybricks FKP 37 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO LOOP COASTER Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO UCS RAZOR CREST Bedienungsanleitung

Lightmybricks

Lightmybricks 76210 Bedienungsanleitung

Lightmybricks

Lightmybricks 10299 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO BUGATTI CHIRON 2.0 Bedienungsanleitung

Lightmybricks

Lightmybricks 10317 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO Hogwarts Castle 71043 Lighting Kit Bedienungsanleitung

Lightmybricks

Lightmybricks 75322 Bedienungsanleitung

Lightmybricks

Lightmybricks 103351 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO SANCTUM SANCTORUM Bedienungsanleitung

Lightmybricks

Lightmybricks Old Fishing Store Lighting Kit 103041 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO CORNER GARAGE Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO NATURAL HISTORY MUSEUM Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO Ship In A Bottle 21313 Lighting Kit Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO Old Trafford Manchester United Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO UCS OBI-WAN's JEDI STARFIGHTER 10215 LIGHT... Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO AVENGERS TOWER Bedienungsanleitung

Lightmybricks

Lightmybricks 103035 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung