Lightmybricks Fire Brigade Bedienungsanleitung

Light My Bricks : Fire Brigade LED Lighting Kit

Here is the instructions document for the LEGO Fire Brigade LED lighting kit. Please read

and follow the steps carefully to ensure this lighting kit is installed properly.

Package contents:

 1x Lamp Post with 30cm Bit Light installed

 4x White Bit Lights 30cm

 4x White Bit Lights 15cm

 2x White Flashing Bit Lights 15cm

 2x Red Flashing Bit Lights 30cm

 5x LED Strip Lights

 4x 15cm Connecting Cables

 1x 30cm Connecting Cable

 5x Adhesive Squares

 1x 12-port Expansion Board

 1x 8-port Expansion Board

 1x AA Battery Pack (Requires 3x AA Batteries)

 1x Flat Battery Pack (Requires 2x CR2032 Batteries)

Extra LEGO Pieces

 2x LEGO Trans Red 1×1 round bricks

 2x LEGO Light Grey 1L bar with mechanical claw clip

 4x LEGO Plates 1×6 for mounting Strip Lights

Important things to note:

Laying cables in between and underneath bricks

Cables can fit in between and underneath LEGO® bricks, plates, and tiles providing they

are laid correctly between the LEGO® studs. Do NOT forcefully join LEGO® together

around cables; instead ensure they are laying comfortably in between each stud.

CAUTION: Forcing LEGO® to connect over a cable can result in damaging the cable

and light.

Connecting cable connectors to Strip Lights

Take extra care when inserting connectors to ports on the Strip Lights. Connectors can be

inserted only one way. With the Strip Light facing up, ensure the side of the connector

with the wires exposed is facing down. If a plug won’t fit easily into a port connector, don’t

force it. Doing so will damage the plug and the connector.

Connecting cable connectors to Expansion Boards

Take extra care when inserting connectors to ports of Expansion Boards. Connectors can

be inserted only one way. With the expansion board facing up, look for the soldered “=”

symbol on the left side of the port. The connector side with the wires exposed should be

facing toward the soldered “=” symbol as you insert into the port. If a plug won’t fit easily

into a port connector, do not force it.

Incorrectly inserting the connector can result in bent pins inside the port or

possible overheating of the expansion board when connected.

Installing Bit Lights under LEGO® bricks and plates.

When installing Bit Lights under LEGO® pieces, ensure they are placed the correct way

up (Yellow LED component exposed). You can either place them directly on top of

LEGO® studs or in between.

OK, Let’s Begin!

Instructions for installing this kit

This section will guide you to install light to the fire truck first.

1) Start by removing the following pieces to allow us to remove one of the headlight

sections from the front.

Remove the trans yellow round plate and then take one White 15cm Bit Light and thread

the connector side through the front hole of the red brick as per below.

Andere Lightmybricks Beleuchtungsausrüstung Handbücher

Lightmybricks

Lightmybricks LEGO TALES OF THE SPACE AGE 21340 Bedienungsanleitung

Lightmybricks

Lightmybricks 75969 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO STAR WARS BD-1 75335 LIGHT KIT Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO WINTER HOLIDAY TRAIN 10254 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO HOGWARTS ICONS Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO Kessel Run Millennium Falcon 75212 Bedienungsanleitung

Lightmybricks

Lightmybricks 75968 Bedienungsanleitung

Lightmybricks

Lightmybricks Old Fishing Store Lighting Kit 103041 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO OPTIMUS PRIME Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO THE BATMAN-BATMOBILE 42127 Bedienungsanleitung

Lightmybricks

Lightmybricks 10309 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO ORCHID Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO EIFFEL TOWER 10307 LIGHT KIT Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO LOOP COASTER Bedienungsanleitung

Lightmybricks

Lightmybricks 10317 Bedienungsanleitung

Lightmybricks

Lightmybricks Downtown Diner Lighting Kit Bedienungsanleitung

Lightmybricks

Lightmybricks 75095 Bedienungsanleitung

Lightmybricks

Lightmybricks Technic DIY Designer Kit Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO Porsche 911 RSR 42096 Lighting Kit Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO 75277 Bedienungsanleitung

Lightmybricks

Lightmybricks 103035 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO FISH TANK Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO TRANQUIL GARDEN 10315 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO HOGWARTS EXPRESS COLLECTORS EDITION Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung