Lightspeed flexcat Bedienungsanleitung
User Manual
Flexible Audio for Group Learning
4
4
3
3
1POWER 2
TABLE OF CONTENTS
SECTION 1: 4 Important safety instructions
Overview 5 System components and unpacking
6 Optional components
7 Redcat Access controls, connections & indicators
9 Flexmike controls and connections
10 Flexcat pod controls and connections
11 Remote control functions and indicators
SECTION 2: 12 1. Determine set-up locations
Initial Set-up 13 2. Plug in the charging station and Redcat
14 3. Charge Flexcat components
15 4. Power on all components
15 5. Ensure all components are ready
16 6. Set up the Flexmike + earbud
17 7. Determine placement of the speaker pods
18 8. Setting system volume levels
SECTION 3: 19 Daily operation instructions
Daily Operation 19 Remove and place the pods
19 Remove the microphone and put it on
19 Remove the remote and begin instruction
20 Using the remote
20 Pod call button
20 Return all components to charging station
SECTION 4: 21 Tips and Tricks
Addtional
Operation
Information
22 Using optional pods #5-6
23 Multimedia audio integration
25 Wall-mounting Redcat Access speaker
SECTION 5: 26 Component registration overview
Maintenance and
Troubleshooting
26 Battery replacement
29 Troubleshooting
SECTION 6: 32 Warranty statement
Warranty, Safety
and Specifications
33 Safety warnings and certifications
37 System specifications
4
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use the apparatus near
water.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance
with the manufacturer’s
instructions.
8. Do not install near any heat
sources such as radiators,
heat registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose
of the polarized or grounding-
type plug. A polarized plug
has two blades with one wider
than the other. A grounding-
type plug has two blades and
a third grounding prong. The
wide blade or the third prong is
provided for your safety. If the
provided plug does not fit into
your outlet, consult an electrician
for replacement of the obsolete
outlet.
10. Protect the power cord from
being walked on or pinched
particularly at plugs, convenience
receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/
accessories specified by the
manufacturer.
13. Unplug this apparatus during
lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus
has been damaged in any way,
such as power-supply cord or
plug is damaged, liquid has been
spilled or objects have fallen into
the apparatus, the apparatus
has been exposed to rain or
moisture, does not operate
normally, or has been dropped.
15. When the mains plug or
appliance coupler is used as the
disconnect device, it shall remain
readily operable.
16. Please keep the unit in a good
ventilation environment.
17. WARNING: To reduce the risk
of fire or electric shock, do not
expose this apparatus to rain or
moisture.
18. Apparatus shall not be exposed
to dripping or splashing and no
objects filled with liquids, such
as vases, shall be placed on the
apparatus.
12. Use only with a cart,
stand, tripod, bracket or
table specified by the
manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
5
1. Overview 2. Initial Set-up 3. DaiIy Operation 4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
SECTION 1:
OVERVIEW
SYSTEM COMPONENTS AND UNPACKING
The standard configuration of the Flexcat will contain:
Flexmike + earbud lanyard
& teacher remote
Charging station with
power supply
Small group speaker
Pods (4-6)
POWER
VolVol
Mute
6
5
1
3
2
4
UP DN
1POWER 2
Redcat Access whole class
speaker with power supply
PLEASE NOTE: Redcat, speaker pods, Flexmike(s) and remote(s) are registered
together at the factory and are labeled as such. Please keep all components
together as a system. Moving them from one system, or room, to another will
result in the need to re-register them to function.
6
1. Overview 2. Initial Set-up 3. DaiIy Operation 4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
Standard Components
RCA Redcat Access whole room speaker w/ power supply
FCCS Flexcat charging station with power supply
FCP Flexcat speaker pod with rechargeable battery pack
FCTT Flexcat team-teaching kit (Flexmike, earbud lanyard
& remote control)
FM-EBL Flexmike pendant microphone with earbud lanyard
and battery pack
FCHRC Flexcat handheld remote control with rechargeable
battery pack
EBL Flexmike earbud lanyard
NH6V 6V NiMH rechargeable battery pack for speaker pods
NH2.4V 2.4V NiMH rechargeable battery pack for Flexmike
and remote
16V-2.0-NA 16V/2.0A power supply and AC cable for RCA and
FCCS
Optional Accessories
16VCC DC charging cable for optional speaker pods #5-6
MSC3535 3.5mm-3.5mm stereo audio cable
USB-MCB USB Type A-Micro B charging cable for Flexmike
OPTIONAL COMPONENTS
Equipment which may be part of your Flexcat:
Additional
speaker pods
Team teaching kit:
2nd Flexmike + earbud
lanyard and remote
VolVol
Mute
6
5
1
3
2
4
UP DN
7
1. Overview 2. Initial Set-up 3. DaiIy Operation 4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
REDCAT SPEAKER CONTROLS,
CONNECTIONS AND INDICATORS
3. MICROPHONE VOLUME: Controls the volume level of teacher
microphone(s) and student sharing from pods.
4. TONE CONTROL: Adjusts the audio tone, adding more bass or treble
for a more rich or crisp sound.
MICROPHONE
VOLUME
MINMAX BASSTREBLE
TONE
(TOP VIEW)
1POWER 2
1. POWER ON INDICATOR: The power light will glow blue
when power is applied.
2. MIC 1 & MIC 2: Mic link and registration indicators
a. Flashing amber indicates registration is in process.
b. Solid green indicates a link has been established.
(FRONT VIEW)
12
34
2
8
1. Overview 2. Initial Set-up 3. DaiIy Operation 4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
REDCAT SPEAKER CONTROLS,
CONNECTIONS AND INDICATORS CON’T
5. REGISTRATION: Press this button if
there is a new microphone, pod, or
remote to be registered.
6. AUDIO INPUT JACK & VOLUME
CONTROL: 3.5mm stereo connector
for connecting multimedia sources
to the Redcat Access. Controls the
volume level of the audio input from
the connected audio source.
7. AUDIO OUTPUT JACK & VOLUME
CONTROL: 3.5mm stereo connector
for connecting to an assisted listening
device (ALD) or to a computer for
recording. Controls the volume level
of the audio output.
8. POWER BUTTON: This button is used
to turn the Redcat Access on or off.
The blue front panel will glow when
power is on.
9. POWER INPUT JACK: Plug the power
supply (16VDC/2.0A) into this jack.
REGISTER
AUDIO IN
MIN
MAX
AUDIO
(ALD) OUT
MIN
MAX
ON/OFF
DC INPUT
16V/2.0A
(SIDE VIEW)
10. CARRYING INSET: Cutaway grip for moving or carrying
the Redcat.
11. CABLE MANAGEMENT AND STRAIN RELIEF
12. WALL MOUNTING SLOTS
13. SECURITY BRACKET SLOT
Testing Purposes Only
5
6
7
8
9
(REAR VIEW)
10
11
12
13
9
1. Overview 2. Initial Set-up 3. DaiIy Operation 4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
FLEXMIKE CONTROLS AND CONNECTIONS
1. POWER/MUTE SWITCH: press and hold to power on, press to mute, press
and hold to power off.
2. MIC 1 STATUS: lighted to indicate microphone is registered as MIC 1.
• Blue: solid = normal operation; flashing = linking in process.
• Red: solid = muted; flashing = muted while linking in process.
3. MIC 2 STATUS: lighted to indicate microphone is registered as MIC 2 (same
behavior as MIC 1 status light above).
4. EARBUD CONNECTION: connect the earbud for monitoring.
5. CHARGING/LOW BATTERY INDICATOR: lights red when charging, green
when fully charged. When in operation, turns red to indicate low battery.
6. MICROPHONE VOLUME UP/DOWN
7. AUDIO INPUT: connect audio source to send to whole class.
8. LANYARD INTERFACE: insert the lanyard into this hook to wear the
Flexmike.
9. BATTERY DOOR: remove the battery door to replace the rechargeable
battery pack.
10. REGISTRATION: (inside battery compartment - not shown) only used when
adding or replacing Flexmike.
1
10
9
8
7
6
5
4
3
2
10
1. Overview 2. Initial Set-up 3. DaiIy Operation 4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
FLEXCAT POD CONTROLS AND
CONNECTIONS
1. CHARGING INDICATOR: this
light turns red when charging,
green to indicate charging
complete.
2. POWER/LOW BATTERY
INDICATOR: this light blinks
blue when powered on, turns
solid blue when ready for
operation and turns red when
the battery is low.
3. POD NUMBER STICKER: this
sticker acts as a clear visual
indicator for the teacher to
determine which speaker
represents which group number.
4. LOUDSPEAKER: the internal
loudspeaker distributes the
teacher’s voice.
5. MICROPHONE: the internal
microphone that picks up the
student’s voice.
6. CALL BUTTON: students can
press this button to notify the
teacher they need assistance.
7. AUDIO OUT: this jack and
volume adjustment connects
audio from the pod to an
assistive listening or recording
device.
8. DC CHARGING/POWER
INPUT: to charge optional pods
#5 and 6, plug the charging
cable from the base station into
this jack.
5
4
CALL AUDIO OUT VOL
CHARGE
16V/0.3A
– +
12
3
67 8
Andere Handbücher für flexcat
3
Inhaltsverzeichnis
Andere Lightspeed Stereoanlage Handbücher
Lightspeed
Lightspeed Redcat Access LSRCA 1881 Bedienungsanleitung
Lightspeed
Lightspeed TOPCAT Bedienungsanleitung
Lightspeed
Lightspeed Cat 885 Bedienungsanleitung
Lightspeed
Lightspeed 800 Series Bedienungsanleitung
Lightspeed
Lightspeed Redcat media Bedienungsanleitung
Lightspeed
Lightspeed TOPCAT Bedienungsanleitung
Lightspeed
Lightspeed 800IX Bedienungsanleitung
Lightspeed
Lightspeed 975 Bedienungsanleitung
Lightspeed
Lightspeed 820iR Bedienungsanleitung
Lightspeed
Lightspeed 850iR Bedienungsanleitung
Lightspeed
Lightspeed Redcat media Bedienungsanleitung
Lightspeed
Lightspeed Access Link Bedienungsanleitung
Lightspeed
Lightspeed Activate System Bedienungsanleitung
Lightspeed
Lightspeed CAT AV Bedienungsanleitung
Lightspeed
Lightspeed CAT 860 Bedienungsanleitung
Lightspeed
Lightspeed Redcat media Bedienungsanleitung
Lightspeed
Lightspeed Redcat media Bedienungsanleitung
Lightspeed
Lightspeed Lightspeed Bedienungsanleitung
Lightspeed
Lightspeed TOPCAT Bedienungsanleitung
Lightspeed
Lightspeed Redcat media Bedienungsanleitung
