Lightspeed Redcat media Bedienungsanleitung

Classroom Audio System

User Manual

Topcat Access

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use the apparatus near

water.

6. Clean only with dry cloth.

7. Do not block any ventilation

openings. Install in accordance

with the manufacturer’s

instructions.

8. Do not install near any heat

sources such as radiators,

heat registers, stoves, or other

apparatus (including amplifiers)

that produce heat.

9. Do not defeat the safety purpose

of the polarized or grounding-

type plug. A polarized plug has

two blades with one wider than

the other. A grounding- type

plug has two blades and a third

grounding prong. The wide blade

or the third prong is provided

for your safety. If the provided

plug does not fit into your

outlet, consult an electrician

for replacement of the obsolete

outlet.

10. Protect the power cord from

being walked on or pinched

particularly at plugs, convenience

receptacles, and the point where

they exit from the apparatus.

11. Only use attachments/

accessories specified by the

manufacturer.

12. Use only with a cart, stand,

tripod, bracket or table specified

by the manufacturer, or sold with

the apparatus. When a cart is

used, use caution when moving

the cart/apparatus combination

to avoid injury from tip-over.

13. Unplug this apparatus during

lightning storms or when unused

for long periods of time.

14. Refer all servicing to qualified

service personnel. Servicing is

required when the apparatus has

been damaged in any way, such

as power-supply cord or plug is

damaged, liquid has been spilled

or objects have fallen into the

apparatus, the apparatus has

been exposed to rain or moisture,

does not operate normally, or has

been dropped.

15. When the mains plug or

appliance coupler is used as the

disconnect device, it shall remain

readily accessible.

16. Please keep the unit in a good

ventilation environment.

17. Warning: To reduce the risk of fire

or electric shock, do not expose

this apparatus to rain or moisture.

18. Apparatus shall not be exposed

to dripping or splashing and no

objects filled with liquids, such

as vases, shall be placed on the

apparatus.

19. Warning - battery pack shall not

be exposed to excessive heat

such as sunshine, fire or the like.

IMPORTANT SAFETY INSTRUCTIONS CONT’D

To avoid potential equipment damage and/or serious injury, READ AND FOLLOW all

safety precautions when installing the TOPCAT. WARNINGS are included throughout the

procedural steps in this guide, and are repeated below for emphasis.

• USE A LICENSED ELECTRICIAN FOR POWER CONNECTIONS. The TOPCAT system

uses standard 100 – 240VAC power. Obtain the services of a licensed electrician

when supplying and connecting power to the ceiling enclosure. BE SURE electrical

installation complies with local building codes. Improperly installing and/or

connecting power to the system may result in EQUIPMENT DAMAGE, serious INJURY

and/or DEATH.

• DO NOT INSTALL ALONE. The ceiling enclosure weighs approximately 20 lbs (9 kg),

and requires at least two people to install. DO NOT install alone.

• USE SUITABLE LADDERS. use proper ladders or support platforms when installing

the TOPCAT enclosure. DO NOT stand on chairs, tables, or other unsuitable surfaces.

• SUPPORT THE CEILING ENCLOSURE PROPERLY. DO NOT allow the full weight of

the ceiling enclosure to rest on the tile grid of the ceiling. The ceiling enclosure is

designed to be suspended at TWO POINTS by suspension wires (secured to raers

or other suitable building structure) and to rest LIGHTLY on the tile grid.

The lightning flash with arrowhead symbol

within an equilateral triangle is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure, that may be suicient magnitude

to constitute a risk of electric shock.

The exclamation point within an equilateral

triangle is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

TABLE OF CONTENTS

SECTION 1: 2Important Safety Instructions

Overview 6System Components and Unpacking

7Optional Components

9Topcat Access: Side Panel Connections

10 Flexmike: Controls & Connections

11 Cradle Charger

12 Set-up and Charging the Flexmike

SECTION 2: 13 Ensure the System On

Daily Operation 14 Operating the Flexmike

Private Conversations

End of Day

15 Using Flexmike as Wireless Audio Link

16 Tips to Obtain Optimum Audio Performance

SECTION 3: 17 Sharemike: Controls & Connections

Optional Accessories 18 Charging the Sharemike

19 Initial Set-up

19 PageFirst Interface

20 Activate Station: Controls & Connections

22 Initial Set-up

24 Charging Flexmikes

25 Register New Components

25 Download Mobile App

26 Pairing Your Mobile Device

27 Output to Assistive Listening Device

27 Activate Station: Record and Capture

27 Video + Audio Recording

29 Audio Only Recording

29 Photo Capture

30 Recording Library and Playback

32 Additional Capabilities with Activate App

33 Activate Station: Optional Audio Integration

34 Activate with Pods

35 Media Connector: Controls and Connections

37 Initial Set-up

38 Using the Media Connector

39 Audio Integration with Media Connector

SECTION 4: 40 Battery Replacement for Flexmike

Maintenance & 41 Battery Replacement for Sharemike

Troubleshooting 42 Troubleshooting

SECTION 5: 44 Five-Year Limited Warranty

Warranty, Safety 45 Safety Warnings & Certifications

& Specifications 50 System Specifications

TABLE OF CONTENTS cont’d

1. Overview 2. Daily Operation 3. Optional

Accessories

4. Maintenance &

Troubleshooting

5. Warranty, Safety

& Specifications

SYSTEM COMPONENTS AND UNPACKING

The standard configuration of the Topcat®system will contain:

Cradle Charger for

Flexmike

Volume Control

Microphone

Topcat Access

TopcatAccess

SECTION 1:

OVERVIEW

1 2

NOTE ON REGISTRATION: The Topcat and any wireless components (microphones, Activate

Station, Media Connector) are pre-registered (paired) together at the Lightspeed factory as

required for proper operation. If paired components are separated and swapped during the

installation process, they must be re-registered. If necessary, please refer to the registration

instructions at www.lightspeed-tek.com/accessregistration.

Lightspeed recommends that the microphone(s), Activate, Media Connector and/or the

accessory box be labeled with the room number of the Topcat that the components are

registered with for proper disbursement.

To assist in this process, Lightspeed has labeled each registered component with a system

number. If components become separated, simply match them up by this number for proper

operation. Additional system labels are attached to the Quick Start Guide should you add

components, or if one of your original components should need to be replaced.

1. Overview 2. Daily Operation 3. Optional

Accessories

4. Maintenance &

Troubleshooting

5. Warranty, Safety

& Specifications

Media Connector and

Power Adaptor

AUDIO INMICROPHONE AUDIO OUT

POWER

MIN

LINK

MAX MIN MAX MIN MAX

OPTIONAL COMPONENTS

Optional equipment which may be part of your Topcat system:

Sharemike Handheld

Microphone

DC Extension Cable

*For further information on Activate for small group instruction, please visit www.lightspeed-tek.com

Activate Station with

Power Supply

ACT-6P add-on Activate

System

1. Overview 2. Daily Operation 3. Optional

Accessories

4. Maintenance &

Troubleshooting

5. Warranty, Safety

& Specifications

SYSTEM COMPONENTS

Equipment which may be part of your Topcat:

Standard Components U.S. and Canada

TCA Topcat all-in-one ceiling-mount wireless audio base

station

24V-2.5A-NA 24V/2.5A power supply for TCA

FMCC Transceiver cradle charger, power supply

5V-1.0 5V power supply for FMCC

FM Flexmike classroom transceiver with battery pack and

lanyard

NH2.4V AA NiMH rechargeable battery pack for Flexmike

FL Flexmike lavaliere cord

Standard Components, outside U.S. and Canada

TCA-1881 Topcat all-in-one ceiling-mount wireless audio base

station

24V-2.5A-__ 24V/2.5A power supply, specify country

FMCC-INT Transceiver cradle charger, power supply

5V-1.0-INT International 5V power supply for FMCC

FM-1881 Flexmike classroom transceiver with battery pack and

lanyard

NH2.4V AA NiMH rechargeable battery pack for Flexmike

FL Flexmike lavaliere cord

Optional Accessories (U.S. and Canada)

ACT-6P Activate for small group instruction

ACT Activate charging station with Bluetooth

24V-1.75A-NA 24V/1.75A power supply for ACT

SM Sharemike handheld transceiver with battery pack

NH2APK AA NiMH rechargeable battery pack for Sharemike

USBDC Charging cable for Sharemike

MCA Wireless audio transceiver

USB1-NA MCA power supply

USB-MCB USB Type A-Micro B power cable for MCA

DCPEX-NA 50’ plenum rated DC power cable kit

EMA Earset microphone with TRRS connector for Flexmike

LMA Lapel microphone with TRRS connector for Flexmike

Optional Accessories (outside U.S. and Canada)

SM-1881 Sharemike handheld transceiver with battery pack

NH2APK AA NiMH rechargeable battery pack for Sharemike, one per

Sharemike

USBDC Charging cable for Sharemike

MCA-1881 Wireless audio transceiver

USB3DC MCA-1881 power supply

USB-MCB USB Type A-Micro B power cable for MCA-1881

5V-1.0-INT 5V charging power supply for USB3DC

DCPEX-___ 15.2m plenum rated DC power cable kit (specify country)

EMA Earset microphone with TRRS connector for Flexmike

LMA Lapel microphone with TRRS connector for Flexmike

1. Overview 2. Daily Operation 3. Optional

Accessories

4. Maintenance &

Troubleshooting

5. Warranty, Safety

& Specifications

TOPCAT ACCESS SIDE PANEL CONNECTIONS

1. AUX POWER INPUT CONNECTOR (OPTIONAL):

For use during installations where AC power is not available in the ceiling.

Accepts 24VDC, 2.5A connector from an external power supply.

2. PAGEFIRST INPUT: Connect the input from optional PageFirst sensor when

interfacing with the building’s paging system. Use the ADJ control inside the

speaker cavity to adjust the sensitivity if needed.

3. AUDIO INPUT: This connection accepts an audio signal from other technology

so all multimedia can be distributed evenly throughout the classroom

4. REGISTRATION BUTTON: This button is used to register the Topcat with the

microphones, Activate or Media Connector.

5. PROGRAMING CONNECTION: For factory use only.

+DC INPUT

24V/2.5A

PAGING

INPUT AUDIO IN REGISTER PROGRAM

SIDE VIEW

1. Overview 2. Daily Operation 3. Optional

Accessories

4. Maintenance &

Troubleshooting

5. Warranty, Safety

& Specifications

FLEXMIKE CONTROLS AND CONNECTIONS

1. POWER/MUTE SWITCH: press and hold to power on, press to mute, press

and hold to power o.

2. MIC 1 STATUS: lighted to indicate microphone is registered as MIC 1

• Blue: solid = normal operation; Blue: flashing = linking in progress

• Red: solid = muted; Red: flashing = muted while linking in progress

3. MIC 2 STATUS: when using a second microphone, this LED is lighted to

indicate microphone is registered as MIC 2 (same behavior as MIC 1 status

light above)

4. EARBUD/MIC CONNECTION: connect the earbud for monitoring *for use

with Activate Pods only, also may be used with the optional EMA (earset)

or LMA (lapel) microphones

5. CHARGING/LOW BATTERY INDICATOR: lights red when charging, green

when fully charged. When in operation, turns red to indicate low battery.

6. MICROPHONE VOLUME UP/DOWN

7. AUDIO INPUT: connect audio source to send to Topcat Access

8. LANYARD INTERFACE: insert the lanyard into this hook to wear the

Flexmike.

9. BATTERY DOOR: remove the battery door to replace the rechargeable

battery pack

10. REGISTRATION: (inside battery compartment - not shown) only used

when adding or replacing Flexmike.

11. SYSTEM ID LABEL

Andere Handbücher für Redcat media

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lightspeed Stereoanlage Handbücher

Lightspeed

Lightspeed Redcat media Bedienungsanleitung

Lightspeed

Lightspeed CAT 860 Bedienungsanleitung

Lightspeed

Lightspeed Redcat media Bedienungsanleitung

Lightspeed

Lightspeed 850iR Bedienungsanleitung

Lightspeed

Lightspeed Activate System Bedienungsanleitung

Lightspeed

Lightspeed Lightspeed Bedienungsanleitung

Lightspeed

Lightspeed 820iR Bedienungsanleitung

Lightspeed

Lightspeed flexcat Bedienungsanleitung

Lightspeed

Lightspeed TOPCAT Bedienungsanleitung

Lightspeed

Lightspeed Redcat media Bedienungsanleitung

Lightspeed

Lightspeed 955Access Bedienungsanleitung

Lightspeed

Lightspeed Cascadia C25 Bedienungsanleitung

Lightspeed

Lightspeed Redcat Access LSRCA 1881 Bedienungsanleitung

Lightspeed

Lightspeed Redcat media Bedienungsanleitung

Lightspeed

Lightspeed 955 Access Bedienungsanleitung

Lightspeed

Lightspeed TOPCAT Bedienungsanleitung

Lightspeed

Lightspeed 705iR Bedienungsanleitung

Lightspeed

Lightspeed Access Link Bedienungsanleitung

Lightspeed

Lightspeed Redcat media Bedienungsanleitung

Lightspeed

Lightspeed Topcat LSRCNG Bedienungsanleitung

Lightspeed

Lightspeed CAT AV Bedienungsanleitung

Lightspeed

Lightspeed TOPCAT Bedienungsanleitung

Lightspeed

Lightspeed 975 Bedienungsanleitung

Lightspeed

Lightspeed Mobile PA Bedienungsanleitung

Beliebte Stereoanlage Handbücher anderer Marken

LG CM3330B Bedienungsanleitung

Sony

Sony SS-CEP50 Bedienungsanleitung

Cetacea Sound

Cetacea Sound CVS-II Bedienungsanleitung

Aiwa

Aiwa XR-H66MD Bedienungsanleitung

Denon

Denon UCD-250 Bedienungsanleitung

Sanyo

Sanyo DC-MX41i Bedienungsanleitung

Sharp

Sharp CD-ES600V Bedienungsanleitung

Exibel

Exibel BDX600-UK Bedienungsanleitung

Sanyo

Sanyo DC-F320 Bedienungsanleitung

Philips

Philips FWM583X Bedienungsanleitung

Sharp

Sharp CD-C462 Bedienungsanleitung

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Bedienungsanleitung

Aiwa

Aiwa XR-EM70 Bedienungsanleitung

Cyrus

Cyrus Lyric Bedienungsanleitung

Philips

Philips MCM159/98 Bedienungsanleitung

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Bedienungsanleitung

RCA

RCA RS3965SB Bedienungsanleitung

Sharp

Sharp XL-UH240 Bedienungsanleitung