Lightware MX4x4DVI Bedienungsanleitung

MX4x4DVI

MX4x4DVI-DL

User's Manual

.....

Version 1.0 Page 2 / 43

SAFETY INSTRUCTIONS

Class I apparatus construction. This equipment must be used with a main power system with

a protective earth connection. The third (earth) pin is a safety feature, do not bypass or

disable it.

This equipment should be operated only from the power source indicated on the product.

To disconnect the equipment safely from power, remove the power cord from the rear of the

equipment, or from the power source. The MAINS plug is used as the disconnect device, the

disconnect device shall remain readily operable.

There are no user-serviceable parts inside of the unit. Removal of the top cover will expose

dangerous voltages. To avoid personal injury, do not remove the top cover. Do not operate

the unit without the cover installed.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with

liquids, such as vases, shall be placed on the apparatus.

The apparatus must be safely connected to multimedia systems. Follow instructions

described in this manual.

Replacing the AC f use

Unplug the AC power cord from the equipment

Locate the AC fuse on the rear of the unit (page 4)

Replace only the AC fuse as indicated on the rear panel of the unit: 3.15A fast

blowing

Connect the power cord to the switcher and to the AC power source. Make sure

the switcher is working properly.

WEEE

( W as te Electrical & Elec tronic Equ ipment)

Co rre ct Dispo sal of T his Product

This marking shown on the product or its literature, indicates that it should not be

disposed with other household wastes at the end of its working life. To prevent

possible harm to the enviroment or human health from uncontrolled waste disposal,

please separate this from other types of wastes and recycle it responsibily to promote

the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this

product, or their local government office, for details of where and how they can take

this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase

contract. This product should not be mixed with other commercial wastes for disposal.

MX4x4DVI-DL

User’s Manual

Page 3 / 43

DECLARATION OF CONFORMITY

We,

Lightware Kft. 1071 Budapest Peterdy str. 15 HUNGARY

as manufacturer declare, that the product

MX4x4DVI

MX4x4DVI-DL

(Computer Matrix Switcher)

in accordance with the EMC Directive 49/336/EEC and the Low Voltage Directive

73/23/EEC amended by the CE-marking Directive 93/64/EEC are in conformity with

the following standards:

EMI/EMC .................... EN 55103-1 E3, EN 55103-2

Safety .......................................... EN 60065 Class I

Date: 20th Februarry 2007

Name: Gergely Vida ( Managing Director )

Signed:

Version 1.0 Page 4 / 43

Table of contents

MX4x4DVI-DL

User’s Manual

Page 5 / 43

1. General description

Lightware MX4x4DVI ( single link) and MX4x4DVI-DL ( dual link ) is a DVI matrix switcher

with 4 DVI inputs and 4 DVI outputs, that routes any input(s) to any combination of output(s).

The router conforms to DVI 1.0 specification, and switches signals between 25 - 165 MHz

pixel clock frequency: from 640x480@60Hz to 1920x1200@60Hz or 2048x1080@60Hz PC

resolutions single link, and up to 3440x2400 pixel in dual link mode.

The input signal is not equalized, therefore only standard length (max 5 meter) DVI cables

can be used.

The switcher has an RS 232 ( or RS422 optional) and an RJ45 LAN port for remote control

applications and a control panel for local control operation. Front panel buttons are

illuminated and easy field relegendable with text for informative system integration.

Box contents

Routing switcher

User's manual

IEC power cable

RS 232 9 pole D-sub Male to Female cable

CD-ROM with control software

Version 1.0 Page 6 / 43

Features

4 Inputs, 4 Outputs non-blocking cross point matrix architecture - The router

allows any input to be switched to any output or more outputs

simultaneously.

Single link, max 1.65 Gb/s DVI-D transmission (1920x1200 or 2048x1080) -

The MX 4x4 DVI routes any DVI single link signal between 25

and 165 MHz pixel clock frequency conforming to DVI 1.0

standard, MX4x4DVI and MX4x4DVI-DL models

Dual link, max 1.65 Gb/s DVI-D transmission (2560x1600 or 3840x2400) - The

MX 4x4 DVI DL routes any DVI single link or dual link signal

between 25 and 165 MHz pixel clock frequency conforming to

DVI 1.0 standard. MX4x4DVI-DL model only.

Supports all HDTV resolutions: 720p, 1080i and 1080p etc. without HDCP

encoding - Unencrypted HDTV signals up to 165 MHz pixel

clock frequency regardless of resolution are passed through

MX 4x4 DVI

EDID routing - Advanced EDID management with EDID emulation. The user can

emulate any EDID on the switcher's inputs independently, read

out and store any attached monitor's EDID in 100 internal

memory locations, upload and download EDID.dat files using

Remote Control Software.

Front panel buttons control – 4 source select, 4 destination select, Take, Load

preset, Save preset, Panel Lock, Output Lock

Relegendable buttons – Each button has an easy removable flat cap and a

translucent label which can be inserted under it to identify

sources and destinations.

RS 232 or RS422 control – Simple ASCII based RS232 protocol is used for

switching, preset calling, status request, etc.

Ethernet control - TCP/IP Ethernet 10Base-T or 100Base TX (Auto-Sensing)

Fiber cable support – Self powered DVI fiber cables using +5V from DVI sources

( VGA cards, etc.) usually are consuming more than 50 mA,

which load is maximum allowed by DVI 1.0 standard.

MX 4x4 DVI & DL supports +5V 500 mA constant current output

on each DVI output to power long distance fiber optical cables.

Universal power supply – the unit accepts AC voltages from 100 to 240 Volts

with 50 or 60 Hz line frequency on standard IEC connector.

Power failure memory – In case of power failure the unit stores its latest

configuration, and after next power up it loads automatically.

MX4x4DVI-DL

User’s Manual

Page 7 / 43

Front Panel view

CONTROL LOCK Sources 1 to 4 Take/ Load Save

Autotake Preset Preset

OUTPUT LOCK Destinations 1 to 4

Control Lock Disables or enables front panel operation. When red

illuminated, operations on front panel are prohibited.

Output Lock Locks and protects one ( or more ) outputs. Inhibits accidental

input changing on protected output.

Sources Source buttons have three functions: to select an input, to

select a preset and to view the selected input’s state (take

mode).

Destinations Destination buttons have two functions: to select an output, or

to view the selected output’s state.

Take/Autotake This button has two functions: displays the actual switching

mode of the router or executes switching on TAKE mode.

Load Preset Loads and executes a previously saved preset from one of the

preset memories.

Save Preset Stores actual matrix state, in one of preset memories.

Version 1.0 Page 8 / 43

Rear Panel view

Signal presence LED-s INPUT connectors 1 to 4

AC Power AC DC Power OUTPUT Connectors1 to 4 Ethernet RS 232/422

connector Fuse LED's control port port

AC Power Standard IEC power connector. The router works with 90 to 264

Volts, 50 or 60 Hz power sources.

RS 232/422 connector 9 pole Dsub female connector for remote control applications.

Can be ordered with RS232 or RS422 control.

Ethernet port RJ 45 connector. Remote control port for connecting the unit to

Local Area Network.

Input connectors 24 pole DVI–D digital only female receptacle connectors.

Connect DVI sources devices to these connectors.

Output connectors 24 pole DVI–D digital only female receptacle connectors.

Connect DVI monitors or other displays to these connectors.

Power LED's Indicators for presence of internal DC voltages +3.3 Volts and +

5 Volts

MX4x4DVI-DL

User’s Manual

Page 9 / 43

RS 232/422 control port

Lightware MX 4x4 DVI and MX 4x4 DVI DL can be remote controlled through

industry standard 9 pole sub-D female connector located on the rear panel of the

unit.

The router can be ordered with RS232 or RS422 control port.

Pin 5 Pin 1

Pin 9 Pin6

RS 232 port pin locations

Table1. - RS232 and RS422 pin connections

Pin nr. RS 232 RS 422

1 NC non connected TX- data transmit complement

2 TX data transmit TX+ data transmit true

3 RX data receive RX+ data receive true

4 DTR internally connected to Pin 6 RX- data receive complement

5 GND signal ground (shield) GND signal ground (shield)

6 DSR internally connected to Pin 4 NC non connected

7 RTS internally connected to Pin 4 NC non connected

4 CTS internally connected to Pin 7 NC non connected

9 NC non connected NC non connected

Version 1.0 Page 10 / 43

DVI inputs

MX4x4DVI and MX4x4DVI-DL provides 24 pole „digital only” DVI-D connectors for

input connections. Always use high quality DVI cable for connecting sources and

displays.

Pin Signal Pin Signal Pin Signal

1 TMDS Data2- 9 TMDS Data1- 17 TMDS Data0-

2 TMDS Data2+ 10 TMDS Data1+ 18 TMDS Data0+

3 TMDS Data2/4 Shield 11 TMDS Data1 Shield 19 TMDS Data0 Shield

4 TMDS Data4- 12 TMDS Data3- 20 TMDS Data5-

5 TMDS Data4+ 13 TMDS Data3+ 21 TMDS Data5+

6 DDC Clock 14 +5V Power 22 TMDS Clock Shield

7 DDC Data 15 GND (for +5V) 23 TMDS Clock+

8 nc 16 Hot Plug Detect 24 TMDS Clock-

Table2. - DVI-D digital only connector Single Link / Dual link pin assignments

DVI outputs

MX 4x4 DVI and MX 4x4 DVI DL provides 24 pole "digital only” DVI-D connectors

for output connections. As standard DVI outputs, there can be used limited length

cables, since there is no output amplification applied. For using longer cable runs

at outputs, use fiber optical DVI cables or active DVI repeaters/extenders.

Fiber Cable powering

As special feature MX4x4DVI and MX4x4DVI-DL on DDC +5V output (pin 14 on

output connectors) is able to supply 500 mA current to power fiber optical DVI

cables. Standard DVI outputs or graphics cards supply only 55 mA current on +5V

output, thus unable to power directly a fiber optical cable.

Info MX4x4DVI and MX4x4DVI-DL does not check if the connected sink (monitor,

projector or other equipment) supports Hotplug or EDID signals but outputs the

selected signal immediately after switch command.

Andere Handbücher für MX4x4DVI

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lightware Matrix-Umschalter Handbücher

Lightware

Lightware MX2-4x4-HDMI20-CA Bedienungsanleitung

Lightware

Lightware MMX8x4-HT Series Bedienungsanleitung

Lightware

Lightware MX4x4DVI Bedienungsanleitung

Lightware

Lightware MMX6x2-HT200 Bedienungsanleitung

Lightware

Lightware MMX8x8-HDMI-4K-A Bedienungsanleitung

Lightware

Lightware MX2-8X8-HDMI20-AUDIO Bedienungsanleitung

Lightware

Lightware MMX8x4-HT420M Bedienungsanleitung

Lightware

Lightware MMX8x4-HT400MC Bedienungsanleitung

Lightware

Lightware MMX8x4-HT420M Bedienungsanleitung

Lightware

Lightware MX6x6DVI Bedienungsanleitung

Lightware

Lightware MX2-8X8-HDMI20-AUDIO Bedienungsanleitung

Lightware

Lightware MX32x32HDMI-Pro Bedienungsanleitung

Lightware

Lightware MX2-8X8-HDMI20-AUDIO Bedienungsanleitung

Lightware

Lightware MMX4x2-HDMI Bedienungsanleitung

Lightware

Lightware MX9x9DVI-Plus Bedienungsanleitung

Lightware

Lightware MMX6x2-HT200 Bedienungsanleitung

Lightware

Lightware MX16x16DVI-Plus Bedienungsanleitung

Lightware

Lightware UMX4x4-Pro Bedienungsanleitung

Lightware

Lightware MMX6x2-HT200 Bedienungsanleitung

Lightware

Lightware MX2-8x8-DH-4DPio-A Bedienungsanleitung

Lightware

Lightware MX-FR Series Bedienungsanleitung

Lightware

Lightware MMX4x2 Series Bedienungsanleitung

Lightware

Lightware MX2M-FR24R Bedienungsanleitung

Lightware

Lightware 4x4DVI-DL Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

Kramer

Kramer XL 3216VS Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

CYP

CYP nT15GX01 Bedienungsanleitung

Kramer

Kramer VP-2x2 Bedienungsanleitung

Kramer

Kramer Sierra Video 6432V5xl Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Octava

Octava HD4XSTPMX Bedienungsanleitung

Intelix

Intelix FLX-88 Betriebsanleitung

Kramer

Kramer LASSEN XL 3232S Bedienungsanleitung

Roland

Roland XS-1HD Bedienungsanleitung

Kramer

Kramer VS-66HDCPxl Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte